Remove-ADDomainControllerPasswordReplicationPolicy

適用対象: Windows 8.1, Windows PowerShell 4.0, Windows Server 2012 R2

Remove-ADDomainControllerPasswordReplicationPolicy

Removes users, computers, and groups from the allowed or denied list of a read-only domain controller password replication policy.

構文

Parameter Set: AllowedPRP
Remove-ADDomainControllerPasswordReplicationPolicy [-Identity] <ADDomainController> -AllowedList <ADPrincipal[]> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: DeniedPRP
Remove-ADDomainControllerPasswordReplicationPolicy [-Identity] <ADDomainController> -DeniedList <ADPrincipal[]> [-AuthType <ADAuthType> {Negotiate | Basic} ] [-Credential <PSCredential> ] [-PassThru] [-Server <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Remove-ADDomainControllerPasswordReplicationPolicy cmdlet removes one or more users, computers, and groups from the allowed or denied list of a read-only domain controller (RODC) password replication policy.

The Identity parameter specifies the RODC that uses the allowed and denied lists to apply the password replication policy. You can identify a domain controller by its GUID, IPV4Address, global IPV6Address, or DNS host name. You can also identify a domain controller by the name of the server object that represents the domain controller, the distinguished name of the NTDS settings object or the server object, the GUID of the NTDS settings object or the server object under the configuration partition, or the distinguished name of the computer object that represents the domain controller. You can also set the Identity parameter to a domain controller object variable, such as $<localDomainControllerobject>, or pass a domain controller object through the pipeline operator to the Identity parameter. For example, you can use the Get-ADDomainController cmdlet to retrieve a domain controller object and then pass the object through the pipeline operator to the Remove-ADDomainControllerPasswordReplicationPolicy cmdlet. You must provide a read-only domain controller.

The AllowedList parameters specify the users, computers and groups to remove from the allowed list. Similarly, the DeniedList parameter specifies the users, computers and groups to remove from the denied list. You must specify either one or both of the AllowedList and DeniedList parameters. You can identify a user, computer or group by distinguished name, GUID, security identifier (SID) or security accounts manager (SAM) account name. You can also specify user, computer or group variables, such as $<localUserObject>. If you are specifying more than one item, use a comma-separated list.

パラメーター

-AllowedList<ADPrincipal[]>

Specifies the users, computers, groups or other accounts to add to the list of accounts allowed to replicate their passwords to this RODC. You can specify more than one value by using a comma-separated list. このパラメーターに対して使用できる値:

-- A distinguished name
-- A GUID (objectGUID)
-- A security identifier (objectSid)
-- A Security Accounts Manager (SAM) account name (sAMAccountName)

-AuthType<ADAuthType>

Specifies the authentication method to use. このパラメーターに対して使用できる値:

-- Negotiate or 0
-- Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

-Credential<PSCredential>

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory module for Windows PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as User1 or Domain01\User01 or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object.

If the acting credentials do not have directory-level permission to perform the task, Active Directory module for Windows PowerShell returns a terminating error.

Specifies the credentials for the security context under which the task is performed. If this security context doesn't have directory level permissions to perform the task, then an error is returned by the directory. If running under the context of an Active Directory module for Windows PowerShell provider drive, the credentials information associated with the drive is used as the default value; otherwise, the currently logged on user security context is used.

-DeniedList<ADPrincipal[]>

Specifies the users, computers, groups or other accounts to add to the list of accounts that are denied the right to replicate their passwords to this RODC. You can specify more than one value by using a comma-separated list. このパラメーターに対して使用できる値:

-- A distinguished name
-- A GUID (objectGUID)
-- A security identifier (objectSid)
-- A SAM account name (sAMAccountName)

-Identity<ADDomainController>

Specifies an Active Directory domain controller object by providing one of the following values. The identifier in parentheses is the Lightweight Directory Access Protocol (LDAP) display name for the attribute. このパラメーターに対して使用できる値:

-- A GUID (objectGUID)
-- An IPV4Address
-- A Global IPV6Address
-- A DNS Host Name (dNSHostName)
-- A name of the server object
-- A distinguished name of the NTDS Settings object
-- A distinguished name of the server object that represents the domain controller
-- A GUID of NTDS settings object under the configuration partition
-- A GUID of server object under the configuration partition
-- A distinguished name of the computer object that represents the domain controller

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an object instance.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-Server<String>

Specifies the Active Directory ドメイン サービス instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory ドメイン サービス or Active Directory snapshot instance.

Specify the Active Directory ドメイン サービス instance in one of the following ways:

Domain name values:

-- Fully qualified domain name
-- NetBIOS name

Directory server values:

-- Fully qualified directory server name
-- NetBIOS name
-- Fully qualified directory server name and port

The default value for this parameter is determined by one of the following methods in the order that they are listed:

-- By using the Server value from objects passed through the pipeline
-- By using the server information associated with the Active Directory ドメイン サービス Windows PowerShell provider drive, when the cmdlet runs in that drive
-- By using the domain of the computer running Windows PowerShell

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADDomainController

  A read-only domain controller object is received by the Identity parameter.

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• None or Microsoft.ActiveDirectory.Management.ADDomainController

  This cmdlet returns the modified read-only domain controller object when the PassThru parameter is specified. By default, this cmdlet does not generate any output.

注

• This cmdlet does not work with Active Directory Lightweight Directory Services (AD LDS).

• This cmdlet does not work with an Active Directory snapshot.

• This cmdlet does not work with a read-only domain controller.

• By default, this cmdlet has the Confirm parameter set, which prompts you to confirm before a removal of the specified object type can occur. To bypass prompting for confirmation before removal, you can specify -Confirm:$False when using this cmdlet.

例

Example 1: Remove specific users from the Allowed list on a RODC

This command removes the users with samAccountNames PattiFuller and DavidChew from the Allowed list on the RODC USER01-RODC1.

PS C:\> Remove-ADDomainControllerPasswordReplicationPolicy -Identity "USER01-RODC1" -AllowedList "PattiFuller", "DavidChew"

Example 2: Remove specific users from the Denied list on a RODC

This command removes the users with samAccountNames Elisa Daugherty and Evan Narvaez from the Denied list on the RODC FABRIKAM-RODC1.

PS C:\> Remove-ADDomainControllerPasswordReplicationPolicy -Identity "USER01-RODC1" -DeniedList "ElisaDaugherty", "EvanNarvaez"

関連トピック

Add-ADDomainControllerPasswordReplicationPolicy

Get-ADDomainController

Get-ADDomainControllerPasswordReplicationPolicy

AD DS Administration Cmdlets in Windows PowerShell