Clear-RemoteAccessInboxAccountingStore
Clear-RemoteAccessInboxAccountingStore
Clears the inbox accounting store for the specified time period.
構文
Parameter Set: Clear0
Clear-RemoteAccessInboxAccountingStore [[-StartDateTime] <DateTime> ] [[-EndDateTime] <DateTime> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Clear-RemoteAccessInboxAccountingStore cmdlet clears the inbox accounting store for the specified time period.
The store for inbox accounting resides locally on every Remote Access server and the clearing operation happens at the server level. Therefore this cmdlet is not impacted by a multi-site deployment.
Note: If neither a start date nor an end date is specified, then the entire inbox accounting store is cleared.
When a store is cleared more space becomes available to record accounting data.
This cmdlet can be used to clear portions of the store even if inbox accounting is Disabled. This is because the store exists even when inbox accounting is later disabled.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ComputerName<String>
Specifies the IPv4 or IPv6 address, or host name, of the computer on which the remote access server computer specific tasks should be run. When this parameter is specified the store residing on that Remote Access server is cleared.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-EndDateTime<DateTime>
Specifies the time duration for which the store should be emptied and indicates the end date. If no start date is specified, then the time stamp of the last record entry in the accounting store is used by default.
エイリアス |
なし |
必須? |
false |
位置は? |
3 |
既定値 |
last day/entry in the accounting store |
パイプライン入力を許可する |
true (ByValue) |
ワイルドカード文字を許可する |
false |
-Force
ユーザーの確認を求めずにコマンドを強制的に実行します。
When this parameter is specified, the cmdlet assumes user confirmation for the clearing of the store.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-StartDateTime<DateTime>
Specifies the time duration for which the store should be emptied and indicates the start date. If no start date is specified, then the time stamp of the first record entry in the accounting store is used by default.
エイリアス |
なし |
必須? |
false |
位置は? |
2 |
既定値 |
first day/entry in the accounting store |
パイプライン入力を許可する |
true (ByValue) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
None
None
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#RemoteAccessInboxAccounting
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
The RemoteAccessInboxAccounting object consists of the following properties:
-- Status of inbox accounting (Enabled or Disabled).
-- Time span of the store.
-- Number of used bytes.
-- Percentage of used bytes.
-- Number of free bytes.
-- Percentage of free bytes.
-- Time stamp of the first record in the database.
-- Time stamp of the last record in the database.
例
EXAMPLE 1
This example deletes the data between the specific dates provided. The remaining data will be preserved.
PS C:\> $startdate = Get-Date –Date "1/1/2011"
PS C:\> $startdate
PS C:\> $enddate = Get-Date –Date "1/3/2011"
PS C:\> $enddate
PS C:\> Clear-RemoteAccessInboxAccountingStore –StartDateTime $startdate –EndDateTime $enddate –PassThru
EXAMPLE 2
This example clears the accounting store and removes all data.
PS C:\> Clear-RemoteAccessInboxAccountingStore