Set-NetAdapterRss

Set-NetAdapterRss

Sets the receive side scaling (RSS) properties on the network adapter.

構文

Parameter Set: ByName
Set-NetAdapterRss [-Name] <String[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-IncludeHidden] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByInstanceID
Set-NetAdapterRss -InterfaceDescription <String[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-IncludeHidden] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-NetAdapterRss -InputObject <CimInstance[]> [-AsJob] [-BaseProcessorGroup <UInt16> ] [-BaseProcessorNumber <Byte> ] [-CimSession <CimSession[]> ] [-Enabled <Boolean> ] [-MaxProcessorGroup <UInt16> ] [-MaxProcessorNumber <Byte> ] [-MaxProcessors <UInt32> ] [-NoRestart] [-NumaNode <UInt16> ] [-NumberOfReceiveQueues <UInt32> ] [-PassThru] [-Profile <Profile> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on the network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors by hashing the header of the incoming packet. Without RSS in , , and Windows Server® 2012; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS. A thorough understanding of RSS is recommended before modifying individual parameters. Selecting the correct profile should be sufficient in most scenarios.

パラメーター

-AsJob

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-BaseProcessorGroup<UInt16>

Sets the base processor group of a non-uniform memory access (NUMA) node. This will impact the processor array used by RSS. This parameter is the lowest group number of any processors that appear in the processor array.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-BaseProcessorNumber<Byte>

Sets the base processor number of a NUMA node. This parameter is the lowest processor number of any processors from the BaseProcessorGroup parameter that appear in the processor array. This allows for partitioning processors across network adapters.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Enabled<Boolean>

Sets the enabled state of RSS on an interface

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-IncludeHidden

Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-InputObject<CimInstance[]>

このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。

エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByValue)

ワイルドカード文字を許可する

false

-InterfaceDescription<String[]>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

エイリアス

ifDesc

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-MaxProcessorGroup<UInt16>

Sets the maximum processor group of a NUMA node. This parameter is the highest group number of any processors that appear in the processor array for this network adapter.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-MaxProcessorNumber<Byte>

Sets the maximum processor number of a NUMA node. This parameter is the highest processor number of any processors from the MaxProcessorGroup parameter that appear in the processor array for this network adapter.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-MaxProcessors<UInt32>

Sets the maximum number of processors to be used concurrently by RSS from the processor array for load balancing network transmissions from a single network adapter.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Name<String[]>

Specifies the name of the network adapter.

エイリアス

ifAlias, InterfaceAlias

必須?

true

位置は?

1

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-NoRestart

Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-NumaNode<UInt16>

Sets the NUMA node affinity for a network adapter. This will ensure that a given network transmission is load balanced by RSS within the NUMA node. This affects the memory allocation and also impacts the preference and ordering of the processors in the processor array. It does not affect the set of processors contained in the array, but it may impact the subset of the array that RSS actually uses.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-NumberOfReceiveQueues<UInt32>

Specifies the number of receive queues per network adapter that is to be used by the interface

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Profile<Profile>

Specifies the RSS profile. このパラメーターに対して使用できる値: Closest, ClosestStatic, NUMA, NUMAStatic, or Conservative.
- Closest: Behavior is consistent with the behavior of .
- ClosestStatic: No dynamic load balancing, such as distributing but not load balancing at runtime.
- NUMA: Assigns RSS processors in a round robin basis across every NUMA node to enable applications that are running on NUMA servers to scale well.
- NUMAStatic: Default behavior. RSS processor selection is the same as for NUMA scalability without dynamic load balancing.
- Conservative: RSS uses as few processors as possible to sustain the load. This option helps reduce the number of interrupts.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterRssSettingData[]

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterRssSettingData

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

EXAMPLE 1

This example sets an RSS profile for a non-uniform memory access (NUMA) server without dynamic load balancing.

PS C:\> Set-NetAdapterRss –Name "Ethernet" -Profile NUMAStatic

関連トピック

Disable-NetAdapterRss

Enable-NetAdapterRss

Get-NetAdapterRss