Disable-NetAdapterPowerManagement

Disable-NetAdapterPowerManagement

Disables specific power management features on the network adapter.

構文

Parameter Set: ByName
Disable-NetAdapterPowerManagement [-Name] <String[]> [-ArpOffload] [-AsJob] [-CimSession <CimSession[]> ] [-D0PacketCoalescing] [-DeviceSleepOnDisconnect] [-IncludeHidden] [-NoRestart] [-NSOffload] [-PassThru] [-RsnRekeyOffload] [-SelectiveSuspend] [-ThrottleLimit <Int32> ] [-WakeOnMagicPacket] [-WakeOnPattern] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByInstanceID
Disable-NetAdapterPowerManagement -InterfaceDescription <String[]> [-ArpOffload] [-AsJob] [-CimSession <CimSession[]> ] [-D0PacketCoalescing] [-DeviceSleepOnDisconnect] [-IncludeHidden] [-NoRestart] [-NSOffload] [-PassThru] [-RsnRekeyOffload] [-SelectiveSuspend] [-ThrottleLimit <Int32> ] [-WakeOnMagicPacket] [-WakeOnPattern] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Disable-NetAdapterPowerManagement -InputObject <CimInstance[]> [-ArpOffload] [-AsJob] [-CimSession <CimSession[]> ] [-D0PacketCoalescing] [-DeviceSleepOnDisconnect] [-NoRestart] [-NSOffload] [-PassThru] [-RsnRekeyOffload] [-SelectiveSuspend] [-ThrottleLimit <Int32> ] [-WakeOnMagicPacket] [-WakeOnPattern] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Disable-NetAdapterPowerMangement cmdlet disables specific power management features on the network adapter. If no power parameters are specified then all power management features are disabled.

パラメーター

-ArpOffload

Manages the address resolution protocol (ARP) offload capability of the adapter.
The computer, when in low power mode using the ARP offload technology, is able to offload the responsibility of handling responses for incoming ARP protocol requests.

-AsJob

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

-D0PacketCoalescing

Manages the D0 packet coalescing capability of the network adapter.
This feature enables power saving on the computer by reducing the number of receive interrupts. This reduces the number of receive interrupts by coalescing random broadcast or multicast packets. The processing overhead and power consumption is significantly reduced on the computer.

-DeviceSleepOnDisconnect

Manages the device sleep on disconnect capability of the network adapter.
This feature allows the device to stand-by in a low power mode when media is disconnected and wake when media is connected again.

-IncludeHidden

Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

-InputObject<CimInstance[]>

このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。

-InterfaceDescription<String[]>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

-Name<String[]>

Specifies the name of the network adapter.

-NoRestart

Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.

-NSOffload

Manages the neighbor solicitation (NS) offload capability of the network adapter.
The computer, when in low power mode using the NS offload technology, is able to offload the handling of responses for incoming NS protocol requests.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-RsnRekeyOffload

Manages the Wi-Fi robust security network (RSN) rekey offload capability of the network adapter.
The computer, when it goes into sleep state, is able to offload the group temporal key (GTK) rekeying for wake on wireless LAN (WoWLAN).

-SelectiveSuspend

Manages the selective suspend capability of the network adapter.
The network drive interface specification (NDIS) selective suspend interface allows NDIS to suspend an idle network adapter by transitioning the adapter to a low-power state. This enables the computer to reduce the power overhead on the CPU and network adapter.

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

-WakeOnMagicPacket

Manages the wake on magic packet capability of the network adapter.
The magic packet is a broadcast frame containing anywhere within its payload 6 bytes of all 255 (FF FF FF FF FF FF in hexadecimal), followed by sixteen repetitions of the 48-bit MAC address of the target computer, for a total of 102 bytes.

-WakeOnPattern

Manages the wake on pattern capability of the network adapter.
A wake pattern refers to network packet filters that determine if incoming network traffic should wake the computer. These patterns can be enabled on the network adapter.
The following wake patterns may be supported by a network adapter:
- Wake Pattern
- Wake on new incoming TCP connection for IPv4 and IPv6 including TCP SYN IPv4 and TCP SYN IPv6.
- 802.1x re-authentication packets
- Bitmapped Patterns. Most network adapters can be programmed with bit-mapped pattern filters. Bitmapped patterns are defined by a bit-map mask and a pattern filter. As a network packet is received, it is masked using the bitmap mask and then compared to the pattern filter. If there is a match, then the network adapter wakes the computer.

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter PowerManagementSettingData[]

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter PowerManagementSettingData

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

例

EXAMPLE 1

This example disables power management on the network adapter named Ethernet 1 and restarts the network adapter.

PS C:\> Disable-NetAdapterPowerManagement -Name "Ethernet 1"

EXAMPLE 2

This example assigns a variable to the network adapter named Ethernet 3 and then inputs that variable into this cmdlet.

PS C:\> $netAdapter1 = Get-NetAdapter –Name "Ethernet 3"
PS C:\> Disable-NetAdapterPowerMangement –InputObject $netAdapter1

This cmdlet uses the pipeline to select the network adapter named Ethernet 3 and then pipe that object into this cmdlet.

PS C:\> Get-NetAdapter –Name "Ethernet 3" | Disable-NetAdapterPowerMangement

EXAMPLE 3

This example disables power management on the network adapter named Ethernet 2 and specifies that the network adapter is not restarted.

PS C:\> Disable-NetAdapterManagement -Name "Ethernet 2" -NoRestart

関連トピック

Enable-NetAdapterPowerManagement

Get-NetAdapter

Get-NetAdapterPowerManagement

Set-NetAdapterPowerManagement