Set-NetAdapter
Set-NetAdapter
Sets the basic network adapter properties.
構文
Parameter Set: ByName
Set-NetAdapter [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-MacAddress <String> ] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-VlanID <UInt16> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByInstanceID
Set-NetAdapter -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-MacAddress <String> ] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-VlanID <UInt16> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-NetAdapter -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-MacAddress <String> ] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-VlanID <UInt16> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Set-NetAdapter cmdlet sets the basic properties of a network adapter such as virtual LAN (VLAN) identifier (ID) and MAC address. Note: These changes could disrupt proper networking functionality. Other network adapter properties may be settable by using a cmdlet such as the Set-NetAdapterRss, Set-NetAdapterLso, or Set-NetAdapterAdvancedProperty cmdlets.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByValue) |
ワイルドカード文字を許可する |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device
.
エイリアス |
ifDesc |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-MacAddress<String>
Specifies the current MAC address of the network adapter. Dashes are optional as part of the input. Note: Not all network adapters support setting the MAC address. The address passed in will be also saved in the network addresses property without dashes.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Name<String[]>
Specifies the name of the network adapter.
エイリアス |
ifAlias, InterfaceAlias |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
true |
-NoRestart
Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-VlanID<UInt16>
Specifies the VLAN ID of the network adapter. Note: Not all network adapters support setting the VLAN ID.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter[]
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
EXAMPLE 1
This example sets the network adapter named Ethernet 1 to have VLAN ID 10.
PS C:\> Set-NetAdapter –Name "Ethernet 1" -VlanID 10
EXAMPLE 2
This example sets the MAC Address of the network adapter named Ethernet 1.
PS C:\> Set-NetAdapter –Name "Ethernet 1" -MacAddress "00-10-18-57-1B-0D"
EXAMPLE 3
This example sets the MAC address of a network adapter with the interface description matching the pattern B*2.
PS C:\> Set-NetAdapter -InterfaceDescription B*2 -MacAddress "00-10-18-57-1B-0D"