New-NetAdapterAdvancedProperty

New-NetAdapterAdvancedProperty

Creates a new advanced property for the network adapter.

構文

Parameter Set: Name
New-NetAdapterAdvancedProperty [-Name] <String> -RegistryKeyword <String> -RegistryValue <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-RegistryDataType <RegDataType> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InstanceID
New-NetAdapterAdvancedProperty -InterfaceDescription <String> -RegistryKeyword <String> -RegistryValue <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-RegistryDataType <RegDataType> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The New-NetAdapterAdvancedProperty cmdlet creates a new advanced property for the network adapter. The intention is that network adapter manufacturers can use this cmdlet to manage advanced properties that are not directly supported by Windows Server® 2012 and later. Note: This cmdlet is the cmdlet in the network adapter family that creates a registry key. All other cmdlets read or modify existing registry entries. Note: The use of wildcards in the network adapter identifier, either in the Name parameter or InterfaceDescription parameter, is not supported.

パラメーター

-AsJob

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-IncludeHidden

Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-InterfaceDescription<String>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

エイリアス

ifDesc

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-Name<String>

Specifies the name of the network adapter.

エイリアス

ifAlias, InterfaceAlias

必須?

true

位置は?

1

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-NoRestart

Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-RegistryDataType<RegDataType>

Specifies the type of the value data to be set in the registry. このパラメーターに対して使用できる値: None, REG_SZ, REG_DWORD, REG_QWORD, and REG_MULTI_SZ.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

false

-RegistryKeyword<String>

Specifies the name of the registry keyword to be created.

エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-RegistryValue<String[]>

Specifies the value of the advanced property.

エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

false

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

  • None

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterAdvancedPropertySettingData

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

EXAMPLE 1

This example creates a new advanced property on the network adapter named MyAdapter with the registry keyword MyKeyword of type REG_SZ with the value 1.

PS C:\> New-NetAdapterAdvancedProperty –Name MyAdapter -RegistryKeyword "MyKeyword" -RegistryValue "1" -RegistryDataType REG_SZ

EXAMPLE 2

This example creates a new advanced property on the network adapter named MyAdapter with the registry keyword MyKeyword of type REG_SZ with the value 1 and the network adapter is specified to not restart. Note: Many advanced properties require restarting the network adapter before the new settings take effect.

PS C:\> New-NetAdapterAdvancedProperty -Name MyAdapter -RegistryKeyword "MyKeyword" -RegistryValue "1" -RegistryDataType REG_SZ -NoRestart

EXAMPLE 3

This example gets a network adapter and creates a new advanced property on the network adapter named Ethernet 3.

PS C:\> $networkAdapter3 = Get-NetAdapter –Name "Ethernet 3"
PS C:\> New-NetAdapterAdvancedProperty –InputObject $networkAdapter3 -RegistryKeyword "MyKeyword" -RegistryValue "1" -RegistryDataType REG_SZ

This is a version of the cmdlet that creates a new advanced property on the network adapter named Ethernet 3 using wildcard characters and the pipeline. Note: Use of wildcard characters is not allowed for the network adapter identifier as part of this cmdlet, but can be used via the pipeline.

PS C:\> Get-NetAdapter –Name "Ethernet 3" | New-NetAdapterAdvancedProperty -RegistryKeyword "MyKeyword" -RegistryValue "1" -RegistryDataType REG_SZ

関連トピック

Get-NetAdapterAdvancedProperty

Remove-NetAdapterAdvancedProperty

Reset-NetAdapterAdvancedProperty

Set-NetAdapterAdvancedProperty