Enable-NetAdapterBinding
Enable-NetAdapterBinding
Enables a binding to a network adapter.
構文
Parameter Set: ByName
Enable-NetAdapterBinding [-Name] <String[]> [-AllBindings] [-AsJob] [-CimSession <CimSession[]> ] [-ComponentID <String[]> ] [-DisplayName <String[]> ] [-IncludeHidden] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: ByInstanceID
Enable-NetAdapterBinding -InterfaceDescription <String[]> [-AllBindings] [-AsJob] [-CimSession <CimSession[]> ] [-ComponentID <String[]> ] [-DisplayName <String[]> ] [-IncludeHidden] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Enable-NetAdapterBinding -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Enable-NetAdapterBinding cmdlet enables binding of a protocol or filter to the network. By default this cmdlet operates on the protocols and filters visible in the Windows UI Network Adapter properties pages. Note: Enabling some adapter bindings can automatically disable other network adapter bindings.
パラメーター
-AllBindings
Enables all protocols and filters associated with this network adapter. Note: Enabling certain network adapter bindings can automatically disable other network adapter bindings. Each network adapter binding is only enabled once. Therefore, after running the cmdlet with this parameter specified there may still be network adapter bindings that are disabled.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ComponentID<String[]>
Specifies the underlying name of the transport or filter in the following form.
- ms_xxxx
, such as ms_tcpip
.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
true |
-DisplayName<String[]>
Specifies the transport or filter name shown in the Networking tab under the network adapter properties in Windows Server® 2012 and later.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
true |
-IncludeHidden
Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByValue) |
ワイルドカード文字を許可する |
false |
-InterfaceDescription<String[]>
Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as 12345 Gigabit Network Device
.
エイリアス |
ifDesc |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-Name<String[]>
Specifies the name of the network adapter.
エイリアス |
ifAlias, InterfaceAlias |
必須? |
true |
位置は? |
1 |
既定値 |
なし |
パイプライン入力を許可する |
true (ByPropertyName) |
ワイルドカード文字を許可する |
true |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter BindingSettingData[]
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapter BindingSettingData
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
例
EXAMPLE 1
This example enables TCIPv4 and IPv4 on the network adapter named MyAdapter using the display name and restarts the network adapter.
PS C:\> Enable-NetAdapterBinding -Name MyAdapter -DisplayName "Internet Protocol Version 4 (TCP/IPv4)"
This is a version of the cmdlet that enables TCPv4 and IPv4 on the network adapter named MyAdapter using wildcard characters in the display name and restarts the network adapter.
PS C:\> Enable-NetAdapterBinding -Name MyAdapter -DisplayName "Inter* (TCP/IPv4)"
EXAMPLE 2
This example enables TCPv4 and IPv4 on the network adapter named MyAdapter using the component ID and restarts the network adapter.
PS C:\> Enable-NetAdapterBinding -Name MyAdapter -ComponentID ms_tcpip