Disable-NetAdapterSriov

Disable-NetAdapterSriov

Disables Single-Root I/O Virtualization (SR-IOV) on the network adapter.

構文

Parameter Set: ByName
Disable-NetAdapterSriov [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByInstanceID
Disable-NetAdapterSriov -InterfaceDescription <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-IncludeHidden] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Disable-NetAdapterSriov -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-NoRestart] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Disable-NetAdapterSriov cmdlet disables Single-Root I/O Virtualization (SR-IOV) on the network adapter. SR-IOV enables network traffic to bypass the software switch layer of the Hyper-V virtualization stack. As a result, the I/O overhead in the software emulation layer is reduced and can achieve network performance that is nearly the same performance as in non-virtualized environments.

This cmdlet prevents the adapter from using SR-IOV until enabled again. While SR-IOV is disabled, Windows Server® 2012 and later will not attempt to allocate a virtual function (VF) to a virtual machine (VM). If VFs from this network adapter are allocated to any VM, then the VFs are revoked and each VM interface reverted to the synthetic network path.

パラメーター

-AsJob

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-IncludeHidden

Specifies both visible and hidden network adapters should be included. By default only visible network adapters are included. If a wildcard character is used in identifying a network adapter and this parameter has been specified, then the wildcard string is matched against both hidden and visible network adapters.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-InputObject<CimInstance[]>

このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。

エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByValue)

ワイルドカード文字を許可する

false

-InterfaceDescription<String[]>

Specifies the network adapter interface description. For a physical network adapter this is typically the name of the vendor of the network adapter followed by a part number and description, such as Contoso 12345 Gigabit Network Device.

エイリアス

ifDesc

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-Name<String[]>

Specifies the name of the network adapter.

エイリアス

ifAlias, InterfaceAlias

必須?

true

位置は?

1

既定値

なし

パイプライン入力を許可する

true (ByPropertyName)

ワイルドカード文字を許可する

true

-NoRestart

Specifies that the network adapter is not restarted as part of running this cmdlet. Note: Many advanced properties require restarting the network adapter before the new settings take effect.

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterSriovSettingData[]

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#ROOT/StandardCimv2/MSFT_NetAdapterSriovSettingData

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
    The output object contains the network adapter object with SR-IOV disabled.

EXAMPLE 1

This example disables SR-IOV on the network adapter named Ethernet 1 and restarts the network adapter.

PS C:\> Disable-NetAdapterSriov -Name "Ethernet 1"

EXAMPLE 2

This example gets a network adapter named Ethernet 3, and disables the network adapter before restarting the network adapter.

PS C:\> $netAdapter3 = Get-NetAdapter –Name "Ethernet 3"
Disable-NetAdapterSriov –InputObject $netAdapter3

A version of the cmdlet that uses the pipeline to select the network adapter named Ethernet 3 and pipes that object into this cmdlet.

PS C:\> Get-NetAdapter –Name "Ethernet 3" | Disable-NetAdapterSriov

EXAMPLE 3

This example disables SR-IOV on the network adapter named Ethernet 1 without restarting the network adapter.

PS C:\> Disable-NetAdapterSriov -Name "Ethernet 2" -NoRestart

関連トピック

Enable-NetAdapterSriov

Get-NetAdapter

Get-NetAdapterSriov

Get-NetAdapterSriovVf

Get-NetAdapterSriov