New-NetIPsecPhase2AuthSet

New-NetIPsecPhase2AuthSet

Creates a phase 2 authentication set that specifies the methods offered for second user authentication during IPsec negotiations.

構文

Parameter Set: cim:CreateInstance0
New-NetIPsecPhase2AuthSet -DisplayName <String> -Proposal <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-Default] [-Description <String> ] [-GPOSession <String> ] [-Group <String> ] [-Name <String> ] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]




詳細説明

The New-NetIPsecPhase1AuthSet cmdlet creates a set that specifies the computerof authentication methods, usually for computer, to use during IPsec negotiations. The first phase of authentication is typically a computer authentication method such as Kerberos v5, certificate, or pre-shared key (PSK) authentication.

A phase 1 authentication set is contains an ordered list of computer authentication proposals. Each proposal in the set specifies the authentication methods to propose. A proposal is created by running the New-NetIPsecAuthProposal cmdlet. During the main mode negotiation, the first proposal that both peers have in common will be used for mutual authentication. The main mode exchange will use the first proposal that the peers have in common. A NetIPsecPhase1AuthSet object and a NetIPsecMainModeCryptoSet object are associated to a NetIPsecMainModeRule object to provide all the necessary security association (SA) parameters for customized main mode negotiations. When the negotiation is successful, a network IPsec main mode SA is created. Use the Get-NetIPsecMainModeSA cmdlet to monitor the SAs that are created.

The default computer authentication set is used with all IPsec rules as specified by the Default parameter at creation time. Additional authentication sets can be used with IPsec main mode rules for fully customized main mode negotiations.

The newly created authentication set can be configured associated with one or more IPsec rules using the main mode or an IPsec rule with the Set-NetIPsecRule and cmdlet or the Set-NetIPsecMainModeRule cmdlets.

This cmdlet creates a set that specifies the authentication methods, usually for user, to use during IPsec negotiations. The second phase of authentication is typically a user authentication method, such as Kerberos v5, certificate, or PSK authentication. The New-NetIPsecPhase1AuthSet cmdlet creates a set of authentication methods to use during IPsec negotiations. The first phase of authentication is typically a computer authentication method such as Kerberos v5, certificate, or PSK authentication.

A phase 1 authentication set contains an ordered list of authentication proposals. A proposal is created by running the New-NetIPsecAuthProposal cmdlet. During the main mode negotiation, the first proposal that both peers have in common will be used for mutual authentication. A NetIPsecPhase1AuthSet object and a NetIPsecMainModeCryptoSet object provide all of the necessary SA parameters for a NetIPsecMainModeRule. Use the Get-NetIPsecMainModeSA cmdlet to monitor the SAs that are created.

The default computer authentication set is used with all IPsec rules as specified by the Default parameter at creation time. Additional authentication sets can be used with IPsec main mode rules for fully customized main mode negotiations.

The newly created authentication set can be associated with one or more IPsec rules using the Set-NetIPsecRule and Set-NetIPsecMainModeRule cmdlets.

A phase 2 authentication set is an ordered list of user authentication proposals. Each proposal in the set specifies the authentication methods to propose. A proposal is created by the New-NetIPsecAuthProposal cmdlet. The phase 2 authentication set is configured to an IPsec rule.

Note: A second authentication cannot be specified in an IPsec rule when a PSK is in the first authentication methods list, with the PhaseAuthSet object.

The user authentication set can be configured to an existing IPsec rule with the Set-NetIPsecRule cmdlet. The default user authentication set is used with all IPsec rules, and specified with Default parameter at creation time.

パラメーター

-AsJob

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。


エイリアス

Session

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Default

Specifies the customized parameters for overriding the defaults for main mode encryption, making it the new default setting for encryption.
For the default Phase2AuthSet object, the default Name parameter value is {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE4}.
To retrieve default settings, query by using the default Name parameter value. To specify a different default cryptographic set, delete the current default set and use the Rename-NetIPsecPhase2AuthSet cmdlet to specify the default set with {E5A5D32A-4BCE-4e4d-B07F-4AB1BA7E5FE4}.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Description<String>

Specifies that matching IPsec rules of the indicated description are created. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-DisplayName<String>

Specifies that only matching firewall rules of the indicated display name are created. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value.
Note: This parameter cannot be set to All.


エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-GPOSession<String>

Specifies the network GPO from which to retrieve the rules to be created.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Group<String>

Specifies that only matching firewall rules of the indicated group association are created. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetIPsecRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify this parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecRule cmdlet, but can be modified using dot-notation and the Set-NetIPsecRule cmdlet.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Name<String>

Specifies that only matching main mode cryptographic sets of the indicated name are created. Wildcard characters are accepted.
This parameter acts just like a filename, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So, if an administrator has a different or more specific rule the same name in a higher-precedence GPO, then it overrides other rules that exist. The default value is a randomly assigned value.When you want to override the defaults for main mode encryption, specify the customized parameters and set this parameter value, making this parameter the new default setting for encryption.


エイリアス

ID

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-PolicyStore<String>

Specifies the policy store from which to retrieve the sets to be created.
A policy store is a container for firewall and IPsec policy.
このパラメーターに対して使用できる値:
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically, during application installation, on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the Static Windows Service Hardening (WSH), and the Configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecMainModeCryptoSet cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecMainModeCryptoSet cmdlet or with this cmdlet.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Proposal<CimInstance[]>

Associates the specified cryptographic proposal to the corresponding cryptographic set to be used in main mode negotiations. Separate multiple entries with a comma.


エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (http://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

  • None

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

  • Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetIKEP2AuthSet

    Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。


EXAMPLE 1

This example creates a rule that requires a first, or computer, authentication and attempts an optional second, or user, authentication.


 

PS C:\> $mkerbauthprop = New-NetIPsecAuthProposal -Machine -Kerberos

 

PS C:\> $mntlmauthprop = New-NetIPsecAuthProposal -Machine -NTLM

 

PS C:\> $p1Auth = New-NetIPsecPhase1AuthSet -DisplayName "First Machine Auth" -Proposal $mkerbauthprop,$mntlmauthprop

 

PS C:\> $ukerbauthprop = New-NetIPsecAuthProposal -User –Kerberos

 

PS C:\> $unentlmauthprop = New-NetIPsecAuthProposal -User –NTLM

 

PS C:\> $anonyauthprop = New-NetIPsecAuthProposal –Anonymous

 

PS C:\> $p2Auth = New-NetIPsecPhase2AuthSet -DisplayName "Second User Auth" –Proposal $ukerbauthprop,$unentlmauthprop,$anonyauthprop

 

PS C:\> New-NetIPSecRule -DisplayName "Authenticate Both Computer and User" -InboundSecurity Require -OutboundSecurity Require -Phase1AuthSet $p1Auth.Name -Phase2AuthSet $p2Auth.Name

関連トピック

コミュニティの追加

追加
表示: