Set-NetIPsecPhase2AuthSet

Set-NetIPsecPhase2AuthSet

Modifies existing phase 2 authentication sets.

構文

Parameter Set: ByDisplayGroup
Set-NetIPsecPhase2AuthSet -DisplayGroup <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-GPOSession <String> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByDisplayName
Set-NetIPsecPhase2AuthSet -DisplayName <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-GPOSession <String> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByGroup
Set-NetIPsecPhase2AuthSet -Group <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-GPOSession <String> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByName
Set-NetIPsecPhase2AuthSet [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-GPOSession <String> ] [-NewDisplayName <String> ] [-PassThru] [-PolicyStore <String> ] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-NetIPsecPhase2AuthSet -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-NewDisplayName <String> ] [-PassThru] [-Proposal <CimInstance[]> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-NetIPsecPhase2AuthSet cmdlet modifies cryptographic set properties of existing main mode cryptographic sets.

This cmdlet gets one or more phase 2 authentication sets to be modified with the Name parameter (default), DisplayName parameter, or by group association using the Group or DisplayGroup parameter. The Get-NetIPsecPhase2AuthSet cmdlet returns the sets queried by property and pipes the sets into this cmdlet. The remaining parameters specify the properties of the set to be modified. When a group is specified, all of the sets associated with the group receive the same modifications. The rule parameters modified using the dot-notation are committed with this cmdlet.

To move a set to a new GPO, copy the existing set by running the Copy-NetIPsecPhase2AuthSet cmdlet with the NewPolicyStore parameter, then remove the old set with the Remove-NetIPsecPhase2AuthSet cmdlet.

パラメーター

-AsJob

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

-Description<String>

Specifies that matching IPsec rules of the indicated description are modified. Wildcard characters are accepted.
This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.

-DisplayGroup<String[]>

Specifies that only matching phase 2 authentication sets of the indicated group association are modified. Wildcard characters are accepted.
The Group parameter specifies the source string for this parameter. If the value for this parameter is a localizable string, then the Group parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetIPsecPhase2AuthSet cmdlet, if the group name is specified for a set of rules, then all of the rules in that group receive the same set of modifications. It is a good practice to specify the Group parameter with a universal and world-ready indirect @FirewallAPI name.
Note: This parameter cannot be specified upon object creation using the New-NetIPsecPhase2AuthSet cmdlet, but can be modified using dot notation and the Set-NetIPsecPhase2AuthSet cmdlet.

-DisplayName<String[]>

Specifies that only matching firewall rules of the indicated display name are modified. Wildcard characters are accepted.
Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value. Note: This parameter cannot be set to All.

-GPOSession<String>

Specifies the network GPO from which to retrieve the rules to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

-Group<String[]>

Specifies that only matching firewall rules of the indicated group association are modified. Wildcard characters are accepted.
This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetIPsecRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is good practice to specify this parameter value with a universal and world-ready indirect @FirewallAPI name.
Note: The DisplayGroup parameter cannot be specified upon object creation using the New-NetIPsecRule cmdlet, but can be modified using dot-notation and the Set-NetIPsecRule cmdlet.

-InputObject<CimInstance[]>

このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。

-Name<String[]>

Specifies that only matching main mode cryptographic sets of the indicated name are modified. Wildcard characters are accepted.
This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So, if an administrator has a different or more specific rule the same name in a higher-precedence GPO, then it overrides other rules that exist.
The default value is a randomly assigned value.
When you want to override the defaults for main mode encryption, specify the customized parameters and set this parameter value, making this parameter the new default setting for encryption.

-NewDisplayName<String>

Specifies the new display name for an IPsec rule.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-PolicyStore<String>

Specifies the policy store from which to retrieve the sets to be modified.
A policy store is a container for firewall and IPsec policy.
このパラメーターに対して使用できる値:
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically, during application installation, on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the Static Windows Service Hardening (WSH), and the Configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: This cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecPhase2AuthSet cmdlet or with the New-NetIPsecPhase2AuthSet cmdlet.

-Proposal<CimInstance[]>

Associates the specified cryptographic proposal to the corresponding cryptographic set to be used in main mode negotiations. Separate multiple entries with a comma.

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\NetIPsecMainModePhase2AuthSet[]

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\NetIPsecMainModePhase2AuthSet[]

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

例

EXAMPLE 1

This example replaces the proposals of an existing authentication set.

PS C:\> $NewCertProposal = New-NetIPsecAuthProposal -User –Cert -Authority "C=US,O=MSFT,CN=Microsoft Root Authority" -AuthorityType Root

PS C:\> Set-NetIPsecPhase2AuthSet -DisplayName "User Certificate Auth Set" –Proposal $NewCertProposal

EXAMPLE 2

This example modifies the display of a phase 1 authentication set.

PS C:\> Set-NetIPsecPhase2AuthSet -DisplayGroup "Authenticate with Certificates" –NewDisplayName "User Authentication Certificates"

関連トピック

Copy-NetIPsecPhase2AuthSet

Get-NetIPsecMainModeCryptoSet

Get-NetIPsecPhase2AuthSet

New-NetIPsecMainModeCryptoSet

New-NetIPsecRule

Open-NetGPO

Remove-NetIPsecPhase2AuthSet

Save-NetGPO

Set-NetIPsecMainModeCryptoSet

Set-NetIPsecRule

New-GPO