Set-NetFirewallInterfaceTypeFilter

Set-NetFirewallInterfaceTypeFilter

Modifies interface type filter objects, thereby modifying the interface type conditions of the firewall or IPsec rules.

構文

Parameter Set: Query (cdxml)
Set-NetFirewallInterfaceTypeFilter [-AsJob] [-CimSession <CimSession[]> ] [-GPOSession <String> ] [-InterfaceType <InterfaceType> ] [-PassThru] [-PolicyStore <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-NetFirewallInterfaceTypeFilter -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-InterfaceType <InterfaceType> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-NetFirewallInterfaceTypeFilter cmdlet modifies the interface types associated with the input firewall or IPsec rules.

See theGet-NetFirewallInterfaceTypeFilter cmdlet for more information about the interface type filters.

To modify the interface type conditions, two methods can be used starting with the interface type filters returned by the Get-NetFirewallInterfaceTypeFilter cmdlet and optional additional querying.
-- The network firewall interface type filter objects are piped into the Get-NetFirewallRule or Get-NetIPsecrule cmdlet. The Get-NetFirewallRule or Get-NetIPsecrule cmdlet returns the rules associated with the filters and pipes the rules into the Set-NetFirewallRule or Set-NetIPsecrule cmdlet, which configures the interface properties.
-- Alternatively, the network firewall interface type filter objects are piped directly to this cmdlet, which modifies the InterfaceType parameter value of the rules.

パラメーター

-AsJob

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。

-GPOSession<String>

Targets the network GPO from which to retrieve the rules to be modified.
This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

-InputObject<CimInstance[]>

このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。

-InterfaceType<InterfaceType>

Specifies that only network connections made through the indicated interface types are subject to the requirements of this rule. This parameter specifies different authentication requirements for each of the three main network types.
このパラメーターに対して使用できる値: Any, Wired, Wireless, or RemoteAccess.
The default value is Any.

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。

-PolicyStore<String>

Targets the policy store from which to retrieve the rules to be modified.
A policy store is a container for firewall and IPsec policy.
このパラメーターに対して使用できる値:
-- PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
-- ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH).
---- GPOs are also policy stores. Computer GPOs can be specified as follows.
------ –PolicyStore hostname.
---- Active Directory GPOs can be specified as follows.
------ –PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name.
------ Such as the following.
-------- -PolicyStore localhost
-------- -PolicyStore corp.contoso.com\FirewallPolicy
---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
-- RSOP: This read-only store contains the sum of all GPOs applied to the local computer.
-- SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server® 2012.
-- StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
-- ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store.
The default value is PersistentStore.
Note: The Set-NetIPsecRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with the Copy-NetIPsecRule cmdlet or with the New-NetIPsecRule cmdlet.

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceTypeFilter[]

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_NetInterfaceTypeFilter[]

  Microsoft.Management.Infrastructure.CimInstance オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。

例

EXAMPLE 1

This example modifies the InterfaceType parameter value for a particular firewall rule.

PS C:\> $nfwInterfaceTypeFilter = ( Get-FirewallRule –DisplayName "Contoso Messenger" | Get-NetFirewallInterfaceTypeFilter )

PS C:\> Set-NetFirewallInterfaceTypeFilter –InterfaceType Any –InputObject $nfwInterfaceTypeFilter

This cmdlet can be run using only the pipeline.

PS C:\> Get-FirewallRule –DisplayName "Contoso Messenger" | Get-NetFirewallInterfaceTypeFilter | Set-NetFirewallInterfaceTypeFilter –InterfaceType Any

This cmdlet can be run without the pipeline.

PS C:\> Set-NetFirewallRule –DisplayName "Contoso Messenger" –InterfaceType Any

EXAMPLE 2

This example modifies the interface type for all of the rules previously associated with the Wired interface type.

PS C:\> $nfwInterfaceTypeFilter = ( Get-NetFirewallInterfaceTypeFilter –InterfaceType Wired )

PS C:\> Set-NetFirewallInterfaceTypeFilter –InterfaceType Any –InputObject $nfwInterfaceTypeFilter

This cmdlet can be run using only the pipeline.

PS C:\> Get-NetFirewallInterfaceTypeFilter –InterfaceType Wired | Set-NetFirewallInterfaceTypeFilter –InterfaceType Any

EXAMPLE 3

This example modifies the interface type associated with all of the IPsec rules in a specified group.

PS C:\> $nfwInterfaceTypeFilter = ( Get-NetIPsecRule –Group DirectAccess | Get-NetFirewallInterfaceTypeFilter )

PS C:\> $nfwInterfaceTypeFilterWired = Where-Object -Property { $_.InterfaceType –Eq "Wired" } –InputObject $nfwInterfaceTypeFilter

PS C:\> Set-NetFirewallInterfaceTypeFilter –InterfaceType RemoteAccess –InputObject $nfwInterfaceTypeFilterWired

This cmdlet can be run using only the pipeline.

PS C:\> Get-NetIPsecRule –Group DirectAccess | Get-NetFirewallInterfaceTypeFilter | Where-Object –Property { $_.InterfaceType –Eq "Wired" } | Set-NetFirewallInterfaceTypeFilter –InterfaceType RemoteAccess

関連トピック

Copy-NetIPsecRule

Get-NetFirewallInterfaceTypeFilter

Get-NetFirewallRule

Get-NetIPSecRule

New-NetFirewallRule

New-NetIPSecRule

Open-NetGPO

Save-NetGPO

Set-NetFirewallRule

Set-NetIPSecRule

New-GPO

Where-Object