Add-DhcpServerv4Policy

Add-DhcpServerv4Policy

Adds a new policy either at the server level or at the scope level.

構文

Parameter Set: Add0
Add-DhcpServerv4Policy [-Name] <String> [-Condition] <String> [-AsJob] [-CimSession <CimSession[]> ] [-CircuitId <String[]> ] [-ClientId <String[]> ] [-ComputerName <String> ] [-Description <String> ] [-Enabled <Boolean> ] [-Fqdn <String[]> ] [-LeaseDuration <TimeSpan> ] [-MacAddress <String[]> ] [-PassThru] [-ProcessingOrder <UInt16> ] [-RelayAgent <String[]> ] [-RemoteId <String[]> ] [-ScopeId <IPAddress> ] [-SubscriberId <String[]> ] [-ThrottleLimit <Int32> ] [-UserClass <String[]> ] [-VendorClass <String[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]




詳細説明

The Add-DhcpServerv4Policy cmdlet adds a new policy either at the server level or at the scope level. The policy name must be unique at the level, either server or specific scope, where the policy is added and should have at least one condition as specified by the CircuitId, ClientId, Fqdn, MACAddress, RelayAgent, RemoteId, SubscriberId, UserClass, or VendorClass parameter.

パラメーター

-AsJob

エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CimSession<CimSession[]>

リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。


エイリアス

Session

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-CircuitId<String[]>

Specifies the comparator to use and the values with which to compare the circuit id sub-option. The first element is the comparator, either EQ or NE, followed by a single value.
    If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, either EQ or NE, which is followed by another value for comparison.
The input format for the value is a hexadecimal string with or without hyphen separation.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-ClientId<String[]>

Specifies the comparator to use and the values with which to compare client identifier. The first element is the comparator, either EQ or NE, and subsequent elements are values.
If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, either EQ or NE, which is followed by another set of values for comparison.
The input format is a hexadecimal string with or without hyphen separation. For example: EQ, 00-11-22-33-44-55, AA-BB-CC-DD-EE*.
The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator will be treated as multiple assertions which are logically differenced (AND’d).


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.


エイリアス

Cn

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Condition<String>

Specifies the logical operator between conditions when multiple conditions are specified. このパラメーターに対して使用できる値: AND or OR.


エイリアス

なし

必須?

true

位置は?

3

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-Description<String>

Specifies the description string of the policy being added.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-Enabled<Boolean>

Specifies the enabled state of a policy. このパラメーターに対して使用できる値: True or False.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-Fqdn<String[]>

Specifies the comparator to use and the values with which to compare the fully qualified domain name (FQDN) in the client request. The first element is the comparator, EQ, NE, Isl, or Insl, and the subsequent elements are values. For the comparators Island Insl, use a blank value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a string. A trailing wildcard character can be present to indicate partial match.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-LeaseDuration<TimeSpan>

Specifies the duration of the lease for clients that match the policy.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-MacAddress<String[]>

Specifies the comparator to use and the values with which to compare the MAC Address in the client request. The first element is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation. A trailing wildcard character can be present to indicate partial match. For example: 00-1F-3B-7C-B7-89, 00-1F-3B-7C-B7-*, 001F3B7CB789.
The output format is a hexadecimal string with hyphen separation.
The values following the EQ operator will be treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator will be treated as multiple assertions which are logically differenced (AND’d).


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-Name<String>

Specifies the name of the policy to be added.


エイリアス

なし

必須?

true

位置は?

2

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-PassThru

作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-ProcessingOrder<UInt16>

Specifies the order of this policy with respect to other policies in the scope or server. The DHCP server service will process the policies in the specified order while evaluating client requests.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-RelayAgent<String[]>

Specifies the comparator to use and values with which to compare the relay agent information. The first element is the comparator, EQ or NE, and subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The input format is a hexadecimal string with or without hyphen separation.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-RemoteId<String[]>

Specifies the comparator to use and values with which to compare the remote ID sub-option. The first element is the comparator, EQ or NE, followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format for the value is a hexadecimal string with or without hyphen separation.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-ScopeId<IPAddress>

Specifies the scope identifier, in IPv4 address format, in which the policy is being added.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-SubscriberId<String[]>

Specifies the comparator to use and the values with which to compare the subscriber ID sub-option. The first element is the comparator, EQ or NE, and followed by a single value. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The value can again be followed by another comparator, EQ or NE, which is followed by another value.
The input format is a hexadecimal string with or without hyphen separation.


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-ThrottleLimit<Int32>

このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0 を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-UserClass<String[]>

Specifies the comparator to use and the user class values to compare with the user class field in the client request. The first element to be specified is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The values to be specified are the user class names which already exist on the server.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-VendorClass<String[]>

Specifies the comparator to use and vendor class values to compare with the vendor class field in the client request. The first element is the comparator, EQ or NE, and the subsequent elements are values. If the last character in a value is an asterisk, then the subsequent characters are treated as wildcard characters for the comparison. If the first character in a value-element is an asterisk, the preceding characters are treated as wild cards for comparison.
The values can again be followed by another comparator, EQ or NE, which is followed by another set of values.
The values to be specified are the vendor class names which already exist on the server.
The values following the EQ operator are treated as multiple assertions which are logically combined (OR’d).
The values following the NE operator are treated as multiple assertions which are logically differenced (AND’d).


エイリアス

なし

必須?

false

位置は?

named

既定値

なし

パイプライン入力を許可する

True (ByPropertyName)

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (http://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

EXAMPLE 1

This example creates a server level policy for virtual machine (VM) clients. The MAC addresses of Hyper-V VMs (00-15-5D) and VMWare VMs (00-05-69) are used as a condition in the policy.


PS C:\> Add-DhcpServerv4Policy -Name HyperVPolicy -Condition OR -MacAddress EQ,00155D*,000569*

EXAMPLE 2

This example creates a server level policy for non-VM clients. The MAC address of Hyper-V VMs (00-15-5D) and VMware VMs (000569) is used as a negation condition in the policy.


PS C:\> Add-DhcpServerv4Policy -Name PhysicalComputersPolicy -Condition OR -MacAddress NE,00155D*,000569*

EXAMPLE 3

This example creates a scope level policy for virtual machine (VM) clients inside the scope 10.10.10.0. The MAC addresses of Hyper-V VMs (00-15-5D) and VMware VMs (00-05-69) are used as a condition in the policy.


PS C:\> Add-DhcpServerv4Policy -Name VMPolicy -ScopeId 10.10.10.0 -Condition OR -MacAddress EQ,00155D*,000569*

EXAMPLE 4

This example creates a printer policy inside the scope 10.10.10.0 based on the vendor class of printers. The vendor classes need to be defined before being used in the policy.


PS C:\> Add-DhcpServerv4Policy -Name PrinterPolicy -ScopeId 10.10.10.0 -Condition OR -VendorClass EQ,"HP Printer","Xerox Printer"

EXAMPLE 5

This example creates a lab computers policy inside the scope 10.10.10.0 based on the user class. The user class needs to be defined before being used in the policy.


PS C:\> Add-DhcpServerv4Policy -Name LabComputerPolicy -ScopeId 10.10.10.0 -Condition OR -UserClass EQ,LabComputers

EXAMPLE 6

This example creates a policy based on the relay agent information (option 82) inside the scope 10.10.10.0. The DHCP relay agent needs to be configured with the relay agent information option (option 82).


PS C:\> Add-DhcpServerv4Policy -Name RelayAgentBasedPolicy -ScopeId 10.10.10.0 -Condition OR -RelayAgent EQ,01030a0b0c02050000000123

EXAMPLE 7

This example creates a policy by combining conditions, using OR, based on MAC address prefix of HTC phone devices and vendor class of Android, inside the scope 10.10.10.0. The vendor class needs to be defined before being used in the policy.


PS C:\> Add-DhcpServerv4Policy -Name DevicesPolicy -ScopeId 10.10.10.0 -Condition OR -MacAddress EQ,F8DB7F* -VendorClass EQ,Android

EXAMPLE 8

This example creates a server level policy for virtual machine (VM) clients and assigns a processing order of 2 and creates the policy in a disabled state. The MAC addresses of Hyper-V VMs (00-15-5D) and VMWare VMs (00-05-69) are used as a condition in the policy.


PS C:\> Add-DhcpServerv4Policy -Name HyperVPolicy -Condition OR -MacAddress EQ,00155D*,000569* -ProcessingOrder 2 -Enabled False

EXAMPLE 9

This example creates a policy by combining conditions, using OR, based on MAC address prefix of HTC phone devices and vendor class of Android, inside the scope 10.10.10.0. The vendor class needs to be defined before being used in the policy. In addition, the command sets the lease duration for the clients to 10 days.


PS C:\> Add-DhcpServerv4Policy -Name DevicesPolicy -Condition OR -LeaseDuration 10 -MacAddress EQ,F8DB7F -ScopeId 10.10.10.0 -VendorClass EQ,Android

EXAMPLE 10

This example creates a server level policy for workgroup joined clients. The policy matches clients that have a single label FQDN in the conditions in the policy.


PS C:\> Add-DhcpServerv4Policy -Name WorkgroupDevices -Condition OR -Fqdn Isl

EXAMPLE 11

This example creates a server level policy for all foreign clients that are not members of the local domain contoso.com. The policy matches clients that have an FQDN that does not contain the value contoso.com.


PS C:\> Add-DhcpServerv4Policy -Name ForeignDevices -Condition OR -Fqdn NE,*.contoso.com

関連トピック

コミュニティの追加

追加
表示: