Set-DhcpServerv4Scope

Set-DhcpServerv4Scope

Sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

Syntax

Parameter Set: WithoutRange
Set-DhcpServerv4Scope [-ScopeId] <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: WithRange
Set-DhcpServerv4Scope [-ScopeId] <IPAddress> -EndRange <IPAddress> -StartRange <IPAddress> [-ActivatePolicies <Boolean> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Delay <UInt16> ] [-Description <String> ] [-LeaseDuration <TimeSpan> ] [-MaxBootpClients <UInt32> ] [-Name <String> ] [-NapEnable <Boolean> ] [-NapProfile <String> ] [-PassThru] [-State <String> ] [-SuperscopeName <String> ] [-ThrottleLimit <Int32> ] [-Type <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Detailed Description

The Set-DhcpServerv4Scope cmdlet sets the properties of an existing IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.

Parameters

-ActivatePolicies<Boolean>

Specifies the enabled state for the policy enforcement on the scope. The acceptable values for this parameter are: True or False.

-AsJob

-CimSession<CimSession[]>

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

-ComputerName<String>

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.

-Delay<UInt16>

Specifies the time, in milliseconds, by which the DHCP server service should delay sending a response to the clients. This parameter should be used on the secondary DHCP server service in a split scope configuration.

-Description<String>

Specifies the description to set for the scope.

-EndRange<IPAddress>

Specifies the ending address of the IPv4 range to set for the scope. If a new IPv4 range is being set, then the previously set IPv4 range of the scope is discarded.

-LeaseDuration<TimeSpan>

Specifies the duration of the IPv4 address lease to give for the clients of the scope.

-MaxBootpClients<UInt32>

Specifies the maximum number of Bootp clients permitted to get an IP address lease from the scope. This parameter can only be used if the Type parameter value is set to Both.

-Name<String>

Specifies the name to set for the scope.

-NapEnable<Boolean>

Specifies the enabled state for network access protection (NAP) for the scope. The acceptable values for this parameter are: True or False.

-NapProfile<String>

Specifies the name of the NAP profile for clients in the scope. The NAP profile refers to the Microsoft Service Class which is a condition used in network policies on the network policy server (NPS). This parameter can only be used if the NapEnable parameter value is set to True.

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

-ScopeId<IPAddress>

Specifies the scope identifier (ID), in IPv4 address format, for which the properties are being set.

-StartRange<IPAddress>

Specifies the starting address of the IPv4 range to set for the scope. If a new IP range is being set, then the previously set IP range of the scope is discarded.

-State<String>

Specifies the state of the scope. The acceptable values for this parameter are: Active and InActive.

-SuperscopeName<String>

Specifies the name of the superscope to which this scope is added.

-ThrottleLimit<Int32>

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

-Type<String>

Specifies the type of the scope. The acceptable values for this parameter are: DHCP, BootP, and Both. The type of the scope determines if the DHCP server service responds to only DHCP client requests, only BootP client requests, or Both types of clients.

-Confirm

Prompts you for confirmation before running the cmdlet.

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

<CommonParameters>

This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see    about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).

Inputs

The input type is the type of the objects that you can pipe to the cmdlet.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Scope

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

The output type is the type of the objects that the cmdlet emits.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv4Scope

  The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Examples

EXAMPLE 1

This example sets the name of the specified DHCPv4 scope to Ext Lab Net VLAN100, activates the scope, and sets the lease duration to 4 days.

PS C:\> Set-DhcpServerv4Scope -ComputerName dhcpserver.contoso.com -ScopeId 10.10.10.0 -Name "Ext Lab Net VLAN100" -State Active -LeaseDuration 4.00:00:00

Related topics

Add-DhcpServerv4Scope

Get-DhcpServerv4Scope

Get-DhcpServerv4ScopeStatistics

Remove-DhcpServerv4Scope