Set-DnsClientGlobalSetting
Set-DnsClientGlobalSetting
Sets the DNS client global, non-interface specific, settings.
構文
Parameter Set: InputObject (cdxml)
Set-DnsClientGlobalSetting [-AsJob] [-CimSession <CimSession[]> ] [-DevolutionLevel <UInt32> ] [-InputObject <CimInstance[]> ] [-PassThru] [-SuffixSearchList <String[]> ] [-ThrottleLimit <Int32> ] [-UseDevolution <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Set-DnsClientGlobalSettings cmdlet sets the global DNS client settings that are global, that are not associated with a specific interface. These settings affect the behavior of the DNS client across all interfaces.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-DevolutionLevel<UInt32>
Specifies the number of labels up to which devolution should occur. If this parameter is not specified, then the FRD algorithm is used. If this parameter is configured, then devolution occurs until the specified level. This parameter value cannot be set if the devolution level setting is already deployed through Group Policy.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-SuffixSearchList<String[]>
Specifies a list of global suffixes that can be used in the specified order by the DNS client for resolving the IP address of the computer name. These suffixes are appended in the specified order to resolve the computer name that is specified. This parameter value cannot be set if the suffix search list setting is already deployed through Group Policy.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-UseDevolution<Boolean>
Specifies that devolution is activated. With devolution, the DNS resolver creates new FQDNs by appending the single-label, unqualified domain name with the parent suffix of the primary DNS suffix name, and the parent of that suffix, and so on, stopping if the name is successfully resolved or at a level specified in the DevolutionLevel parameter. Devolution works by removing the left-most label and continuing to get to the parent suffix. The default value is True. This parameter value cannot be set if the devolution level setting is already deployed through Group Policy.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
True |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_DNSClientGlobalSetting
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Management.Infrastructure.CimInstance#root\StandardCimv2\MSFT_DNSClientGlobalSetting
Microsoft.Management.Infrastructure.CimInstance
オブジェクトは、Windows Management Instrumentation (WMI) オブジェクトを表示するラッパー クラスです。シャープ記号 (#
) の後のパスは、基になる WMI オブジェクトの名前空間とクラス名です。
The MSFT_DNSClientGlobalSetting class has the various global settings for the DNS client. Global settings include non-interface specific settings.
例
EXAMPLE 1
This example sets the DNS suffix search list on the computer.
PS C:\> Set-DnsClientGlobalSetting -SuffixSearchList @("corp.contoso.com", "na.corp.contoso.com")