Set-IpamConfiguration
Set-IpamConfiguration
Modifies the configuration for the computer that runs the IPAM server.
構文
Parameter Set: SetIpamConfiguration0
Set-IpamConfiguration [-Port] <UInt16> [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SetIpamConfiguration1
Set-IpamConfiguration [-ProvisioningMethod] <ProvisioningMethod> [[-GpoPrefix] <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SetIpamConfiguration2
Set-IpamConfiguration -RefreshHmacKey [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SetIpamConfiguration3
Set-IpamConfiguration -HmacKey <SecureString> [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-UpdateTables] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SetIpamConfiguration4
Set-IpamConfiguration -UpdateTables [-AsJob] [-CimSession <CimSession[]> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Set-IpamConfiguration cmdlet modifies the IP Address Management (IPAM) server configuration, including the TCP port over which the computer that runs the IPAM Remote Server Administration Tools (RSAT) client connects and communicates with the computer that runs the IPAM server.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Force
ユーザーの確認を求めずにコマンドを強制的に実行します。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-GpoPrefix<String>
Specifies the unique GPO prefix name that IPAM uses to create the group policy objects. Use this parameter only when the value of ProvisioningMethod is set to Automatic.
エイリアス |
なし |
必須? |
false |
位置は? |
3 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-HmacKey<SecureString>
Specifies a keyed-hash message authentication code (HMAC).
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Port<UInt16>
Specifies the TCP port number for communication between computers that run the IPAM RSAT client and the IPAM server. IPAM lets you configure any port number in the range 1-65535 for communication between computers that run the IPAM client and server. To avoid port conflicts with well-known ports, choose a port from the unassigned port range, 48620-49150. By default, IPAM uses port number 48885. The cmdlet configures appropriate custom IPAM server firewall rules for the specified new port, enables appropriate custom IPAM server firewall rules for the specified new port, and restarts the IPAM application pool to listen on the specified new port.
エイリアス |
なし |
必須? |
true |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ProvisioningMethod<ProvisioningMethod>
Specifies a provisioning method. このパラメーターに対して使用できる値:Automatic and Manual.
エイリアス |
なし |
必須? |
true |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-RefreshHmacKey
Indicates that the cmdlet refreshes the HMAC key, if the key has expired.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-UpdateTables
Indicates that the cmdlet updates the database tables.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
- None
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
Microsoft.Windows.Ipam.Commands.IpamConfiguration
This object contains an IPAM configuration.
例
Example 1: Modify an IPAM configuration
This command changes the IPAM server management port to 45000 and suppresses the default confirmation text. The command also returns the modified IPAM server configuration object.
PS C:\> Set-IpamServerConfiguration -Port 45000 -PassThru -Force