Set-SCVirtualDiskDrive

Set-SCVirtualDiskDrive

Modifies settings of a virtual disk drive object on a virtual machine or on a virtual machine template in a VMM environment.

構文

Parameter Set: BusChanges
Set-SCVirtualDiskDrive -VirtualDiskDrive <VirtualDiskDrive> [-Bus <Byte> ] [-CreateDiffDisk <Boolean> ] [-IDE] [-JobGroup <Guid]> ] [-JobVariable <String> ] [-LUN <Byte> ] [-OnBehalfOfUser <System.String> ] [-OnBehalfOfUserRole <Microsoft.SystemCenter.VirtualMachineManager.UserRole> ] [-PROTipID <Guid]> ] [-RunAsynchronously] [-SCSI] [-SharedStorage <Boolean> ] [-StorageClassification <StorageClassification> ] [-VolumeType <VolumeType> {None | Boot | System | BootAndSystem} ] [ <CommonParameters>]

詳細説明

The Set-SCVirtualDiskDrive cmdlet modifies settings of a virtual disk drive object on a virtual machine or on a virtual machine template in a Virtual Machine Manager (VMM) environment. You can use this cmdlet to change the Bus type (IDE or SCSI), or to change the Bus and LUN settings to connect a virtual disk drive to a different location on the bus.

パラメーター

-Bus<Byte>

Specifies the IDE bus to which to attach a virtual disk drive or virtual DVD drive, or the SCSI bus to which to attach a virtual disk drive.

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

-CreateDiffDisk<Boolean>

Indicates whether the cmdlet creates a differencing disk.

-IDE

Specifies IDE as the bus type to which to attach a virtual disk drive object or a virtual DVD drive object configured on a virtual machine or on a template.

Example format: -IDE –Bus 0 –LUN 1

-JobGroup<Guid]>

Specifies an identifier for a series of commands that will run as a set just before the final command that includes the same job group identifier runs.

-JobVariable<String>

Specifies that job progress is tracked and stored in the variable named by this parameter.

-LUN<Byte>

Specifies the logical unit number (LUN) for a virtual disk drive object or for a virtual DVD drive object on an IDE bus, or for a virtual disk drive object on a SCSI bus.

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

-OnBehalfOfUser<System.String>

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

-OnBehalfOfUserRole<Microsoft.SystemCenter.VirtualMachineManager.UserRole>

Example format: -IDE -Bus 1 -LUN 0

Example format: -SCSI -Bus 0 -LUN 1

NOTE: See the examples for a specific cmdlet to determine how that cmdlet uses this parameter.

-PROTipID<Guid]>

Specifies the ID of the PRO tip that triggered this action. This allows for auditing of PRO tips.

-RunAsynchronously

Indicates that the job runs asynchronously so that control returns to the command shell immediately.

-SCSI

Specifies SCSI as the bus type to which to attach a virtual disk drive object configured on a virtual machine or on a template.

Example format: -SCSI -Bus 0 -LUN 0

-SharedStorage<Boolean>

Indicates whether the object uses shared storage.

-StorageClassification<StorageClassification>

Specifies a storage classification object.

-VirtualDiskDrive<VirtualDiskDrive>

Specifies a virtual disk drive object. You can attach either a virtual hard disk (for a virtual machine on any host) or a pass-through disk (for a virtual machine on a Hyper-V host or an ESX host) to a virtual disk drive object.

-VolumeType<VolumeType>

Specifies the volume type for a virtual hard disk. Valid values:

-- Boot
-- System
-- BootAndSystem
-- None

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

• VirtualDiskDrive

注

• This cmdlet requires a VMM virtual disk drive object, which can be retrieved by using the Get-SCVirtualDiskDrive cmdlet.

例

Example 1: Change the IDE bus and LUN settings for a virtual disk drive on a virtual machine

The first command gets the virtual machine object VM01, and then stores the object in the $VM variable.

The second command gets the virtual disk drive object on VM01, and then stores the object in $VirtDiskDrive. Using the @ symbol and parentheses ensures that the command stores the results in an array in case the command returns a single object or $Null.

The last command sets the Bus value to 0 and sets the LUN value to 0 for the virtual disk drive on VM01 if the virtual machine has only one virtual disk drive and is located on the second slot of the first IDE channel.

PS C:\> $VM = Get-SCVirtualMachine -Name "VM01"
PS C:\> $VirtDiskDrive = @(Get-SCVirtualDiskDrive -VM $VM)
PS C:\> if($VirtDiskDrive.Count -eq 1 -and $VirtDiskDrive[0].Bus -eq 0 -and $VirtDiskDrive[0].Lun -eq 1){Set-SCVirtualDiskDrive -VirtualDiskDrive $VirtDiskDrive[0] -Bus 0 -LUN 0}

Example 2: Change the bus type for a virtual disk drive from SCSI to IDE

The first command gets the virtual machine object named VM02, and then stores the object in the $VM variable.

The second command gets all virtual disk drive objects configured for the virtual machine stored in $VM and stores the virtual disk drive objects in the $VirtDiskDrive object array. This example assumes that the virtual disk drive is on a SCSI bus.

The last command sets the Bus type to IDE and connects the second virtual disk drive, specified by $VirtDiskDrive[1], to Primary Channel (1) and slot 2, specified by Bus 0 and LUN 1.

PS C:\> $VM = Get-SCVirtualMachine -Name "VM02"
PS C:\> $VirtDiskDrive = Get-SCVirtualDiskDrive -VM $VM
PS C:\> Set-SCVirtualDiskDrive -VirtualDiskDrive $VirtDiskDrive[1] -IDE -Bus 0 -LUN 1

関連トピック

Compress-SCVirtualDiskDrive

Convert-SCVirtualDiskDrive

Expand-SCVirtualDiskDrive

Get-SCVirtualDiskDrive

New-SCVirtualDiskDrive

Remove-SCVirtualDiskDrive

Get-SCVirtualMachine