Reset-StorageReliabilityCounter
Reset-StorageReliabilityCounter
Resets storage reliability counters for a disk.
構文
Parameter Set: ByPhysicalDisk
Reset-StorageReliabilityCounter -PhysicalDisk <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: ByVirtualDisk
Reset-StorageReliabilityCounter -Disk <CimInstance> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Reset-StorageReliabilityCounter -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
詳細説明
The Reset-StorageReliabilityCounter cmdlet resets the storage reliability counters to zero for a virtual disk or physical disk. The cmdlet resets the following storage reliability counters for I/O operations: read latency, write latency, and flush latency. If an unexpected issue with a disk or driver causes high latency, use this cmdlet to discount the sharp rise in latencies when you monitor I/O performance.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Disk<CimInstance>
Specifies a disk as a CIMInstance object. The cmdlet resets the storage reliability counter for the disk that you specify. To obtain a disk, use the Get-Disk cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-PassThru
作業中の項目を表すオブジェクトを返します。既定では、このコマンドレットによる出力はありません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-PhysicalDisk<CimInstance>
Specifies a physical disk as a CIMInstance object. The cmdlet resets the storage reliability counter for the physical disk that you specify. To obtain a physical disk object, use the Get-PhysicalDisk cmdlet.
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
-
You can use the pipeline operator to pass an arrary of MSFT_StorageReliabilityCounter objects to the InputObject parameter.
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
-
This cmdlet outputs an array of objects that represent storage reliability counter data.
例
Example 1: Reset the reliability counters for two physical disks
The first command gets the storage reliability counters for the physical disk named PhysicalDisk01, and stores the counters in the $Counter1 variable.
The second command gets the storage reliability counters for the physical disk named PhysicalDisk02, and stores the counters in the $Counter2 variable.
The last command resets the storage reliability counters for the physical disks stored in $Counter1 and $Counter2.
PS C:\> $Counter1 = Get-StorageReliabilityCounter -PhysicalDisk (Get-PhysicalDisk "PhysicalDisk01")
PS C:\> $Counter2 = Get-StorageReliabilityCounter -PhysicalDisk (Get-PhysicalDisk "PhysicalDisk02")
PS C:\> Reset-StorageReliabilityCounter -InputObject $Counter1, $Counter2