Set-SCVMHost

[アーティクル]
11/16/2015

Set-SCVMHost

Changes properties of a virtual machine host.

構文

Parameter Set: XenServerHost
Set-SCVMHost [-VMHost] <Host> [-AvailableForPlacement <Boolean]> ] [-BaseDiskPaths <String> ] [-BMCAddress <String> ] [-BMCCustomConfigurationProvider <ConfigurationProvider> ] [-BMCPort <UInt32]> ] [-BMCProtocol <OutOfBandManagementType]> ] [-BMCRunAsAccount <RunAsAccount> ] [-Certificate <ClientCertificate> ] [-CPUPercentageReserve <UInt16]> ] [-Credential <PSCredential> ] [-Custom1 <String> ] [-Custom10 <String> ] [-Custom2 <String> ] [-Custom3 <String> ] [-Custom4 <String> ] [-Custom5 <String> ] [-Custom6 <String> ] [-Custom7 <String> ] [-Custom8 <String> ] [-Custom9 <String> ] [-Description <String> ] [-DiskSpaceReserveMB <UInt64]> ] [-EnableLiveMigration <Boolean]> ] [-EnableSecureMode <Boolean> ] [-FibreChannelWorldWideNodeName <String> ] [-FibreChannelWorldWidePortNameMaximum <String> ] [-FibreChannelWorldWidePortNameMinimum <String> ] [-IsDedicatedToNetworkVirtualizationGateway <Boolean]> ] [-JobGroup <Guid]> ] [-JobVariable <String> ] [-LiveMigrationMaximum <UInt32]> ] [-LiveStorageMigrationMaximum <UInt32]> ] [-MaintenanceHost <Boolean]> ] [-ManagementAdapterMACAddress <String> ] [-MaxDiskIOReservation <UInt64]> ] [-MemoryReserveMB <UInt64]> ] [-MigrationAuthProtocol <MigrationAuthProtocolType]> ] [-MigrationPerformanceOption <MigrationPerformanceOptionType]> ] [-MigrationSubnet <String[]> ] [-NetworkPercentageReserve <UInt16]> ] [-NumaSpanningEnabled <Boolean]> ] [-OverrideHostGroupReserves <Boolean]> ] [-PROTipID <Guid]> ] [-RemoteConnectCertificatePath <String> ] [-RemoteConnectEnabled <Boolean]> ] [-RemoteConnectPort <UInt32]> ] [-RemoveRemoteConnectCertificate] [-RunAsynchronously] [-SecureRemoteConnectEnabled <Boolean]> ] [-SMBiosGuid <Guid]> ] [-TCPPort <UInt32]> ] [-UseAnyMigrationSubnet <Boolean]> ] [-VMHostManagementCredential <VMMCredential> ] [-VMPaths <String> ] [ <CommonParameters>]

詳細説明

The Set-SCVMHost cmdlet changes one or more properties of a virtual machine host managed by Virtual Machine Manager (VMM).

You can configure the following host reserve settings:

-- Percentage of CPU usage to set aside for use by the host.
-- Amount of disk space (MB) to set aside for use by the host.
-- Maximum number of disk I/O operations per second (IOPS) to set aside for use by the host.
-- Amount of memory (MB) to set aside for use by the host.
-- Percentage of network capacity to set aside for use by the host.

The VMM placement process will not recommend placing a virtual machine on a host unless the resource requirements of the virtual machine can be met without using the host reserves. If you do not specify reserve settings, VMM uses default settings.

You can specify, as a set of default paths, locations on a host where virtual machine files can be stored.

You can specify the password for an account used to manage Hyper-V hosts that are located in a perimeter network or in a non-trusted domain.

You can configure remote connection settings for Hyper-V hosts (VMConnect) that enable users to connect to virtual machines remotely. This setting does not apply to virtual machines on VMware ESX hosts.

パラメーター

-AvailableForPlacement<Boolean]>

Indicates whether the VMM placement process will consider this host or this volume on a host to be eligible as a possible location on which to deploy virtual machines. If this parameter is set to $False, you can choose to deploy virtual machines on this host or volume anyway. The default value is $True. This parameter does not apply to VMware ESX hosts.

When this parameter is used with network adapters, if set to $False, then placement will not consider the logical networks configured on this network adapter to determine if the host is suitable for connecting a virtual machine.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BaseDiskPaths<String>

Specifies the paths to base disks.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BMCAddress<String>

Specifies, or updates, the out-of-band baseboard management controller (BMC) address for a specific physical machine. This might be an IP address, the fully qualified domain name (FQDN), or the DNS prefix (which is usually the same name as the NetBIOS name).

Typically, the BMC address and its connection to the network are separate from the IP address associated with a standard network adapter. Alternatively, some computers do use a standard network adapter to provide a single address for the BMC and for the network adapter. However, the BMC address has a unique port and is thus uniquely identifiable on the network.

Example IPv4 format: -BMCAddress "10.0.0.21"

Example Ipv6 format: -BMCAddress "2001:4898:2a:3:657b:9c7a:e1f0:6829"

Example FQDN format: -BMCAddress "Computer01.Contoso.com"

Example NetBIOS format: -BMCAddress "Computer01"

NOTE: By default, VMM uses an IP address or FQDN for the BMC address. However, it is also possible to create a Windows PowerShell module that enables you to specify other types of addresses as the BMC address.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BMCCustomConfigurationProvider<ConfigurationProvider>

Specifies, or updates, a configuration provider object for a baseboard management controller (BMC). A configuration provider is a plug-in to VMM that translates VMM PowerShell commands to API calls that are specific to a type of baseboard management controller. This parameter should be used with the BMCProtocol parameter value of Custom.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BMCPort<UInt32]>

Specifies, or updates, the out-of-band baseboard management controller (BMC) port for a specific physical machine. A BMC port is also known as a service processor port. Example default ports are 623 for IPMI and 443 for SMASH over WS-Man.

Example format: -BMCPort 80

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BMCProtocol<OutOfBandManagementType]>

Specifies, or updates, the protocol that VMM uses to communicate with the out-of-band baseboard management controller (BMC). Valid values are:

-- IPMI
-- SMASH
-- Custom

A BMC (also known as a service processor or management controller) is a specialized controller on the motherboard of a server that acts an interface between the hardware and system management software. If the motherboard of a physical machine includes a BMC, when the machine is plugged in, whether it is powered off or powered on, and whether or not an operating system is installed, information about system hardware and the state of that system hardware health is available.

Example format: -BMCProtocol "Custom"

NOTE: The Custom protocol requires you to use the BMCCustomConfigurationProvider parameter.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-BMCRunAsAccount<RunAsAccount>

Specifies the Run As account to use with the baseboard management controller (BMC) device.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Certificate<ClientCertificate>

Specifies a security certificate object.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-CPUPercentageReserve<UInt16]>

Specifies the percentage of CPU to reserve for the use of the operating system on the physical host computer. If you do not use this parameter to specify the reserve, the default setting for the host group is used: 10 percent. The VMM placement process will not recommend that a virtual machine be placed on a host unless its resource requirements can be met without using host reserves.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false

-Credential<PSCredential>

Specifies a credential object or, for some cmdlets, a Run As account object that contains the user name and password of an account that has permission to perform this action. Or, in the case of Restart-SCJob, has permission to complete a restarted task.

For more information about the PSCredential object, type Get-Help Get-Credential. For more information about Run As accounts, type, Get-Help New-SCRunAsAccount.

エイリアス	none
必須?	false
位置は?	named
既定値	none
パイプライン入力を許可する	false
ワイルドカード文字を許可する	false