Import-SmigServerSetting

Import-SmigServerSetting

Imports selected Windows features, and operating system settings from a migration store, and applies them to the local computer.

構文

Parameter Set: Default
Import-SmigServerSetting [[-Feature] <Feature[]> ] [[-FeatureId] <String[]> ] [[-User] <String> ] [[-Group]] [[-SourcePhysicalAddress] <String[]> ] [[-Force]] [-Path] <String> [[-TargetPhysicalAddress] <String[]> ] [[-IPConfig] <String> ] -Password <SecureString> [-Confirm] [-WhatIf] [ <CommonParameters>]




詳細説明

Imports selected Windows features and operating system settings from a migration store identified in the Path parameter, and applies them to the local computer. Before running this cmdlet, you must first use the Export-SmigServerSetting cmdlet to export Windows features, and settings from a source server to the migration store. The order in which settings are applied is not guaranteed. To migrate settings that must be migrated in sequential order, run the Import-SmigServerSetting cmdlet multiple times to apply the settings in the required order. You can also use this cmdlet to install Windows features and their dependencies, if the Windows features you are migrating have not been installed. Some Windows features might require that the destination computer be restarted to complete installation. After restarting the computer, you must run the cmdlet again with -Force parameter to complete the import operation.

For online Help about the Windows Server Migration Tools cmdlets, see http://go.microsoft.com/fwlink/?LinkId=246313.

パラメーター

-Feature<Feature[]>

Specifies the Windows feature objects that you want to import from the migration store. Not all Windows features can be migrated by using migration cmdlets. You can use the Get-SmigServerFeature cmdlet to retrieve a list of Windows features that can be migrated from the migration store to the destination server, and pass the resulting list to the Import-SmigServerSetting cmdlet, either by piping the results to the cmdlet, or by storing the results in a variable and then using the variable to represent the results in your command.

This cmdlet also installs Windows features and their dependencies, if the features you are migrating have not been installed. Some Windows features might require that the destination computer be restarted to complete installation. After restarting the computer, you must run the cmdlet again with the -Force parameter to complete the import operation.


エイリアス

F

必須?

false

位置は?

1

既定値

なし

パイプライン入力を許可する

True (ByValue)

ワイルドカード文字を許可する

false

-FeatureId<String[]>

Specifies the IDs of the Windows features that you want to import from the migration store. Not all Windows features are supported for migration. You can use the Get-SmigServerFeature cmdlet to retrieve a list of Windows features, along with their feature IDs, that can be migrated from the migration store to the destination server. Separate multiple feature IDs by using commas. Standard PowerShell wildcard characters are supported.

This cmdlet also installs Windows features and their dependencies, if the features you are migrating have not been installed. Some Windows features might require that the destination computer be restarted to complete installation. After restarting the computer, you must run the cmdlet again with the -Force parameter to complete the import operation.


エイリアス

ID

必須?

false

位置は?

2

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Force

Specifies that imported settings overwrite existing Windows feature settings on the destination computer. If this parameter is not used, by default, existing Windows feature settings on the destination computer are preserved.


エイリアス

なし

必須?

false

位置は?

8

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Group

Imports the local groups and their memberships from the migration store. If a group already exists on the destination server, it is not overwritten. Group memberships from the source server are added to existing groups on the destination server, and the existing group memberships on the destination server are preserved.


エイリアス

なし

必須?

false

位置は?

6

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-IPConfig<String>

Imports the source server's basic IP configuration settings. The following are acceptable values for this parameter:
     - NIC: network interface card (NIC) IP configuration settings such as connection-specific suffix, IPv4 settings and Disable IPv6 Component registry key. IP configuration can only be imported for a NIC if it is enabled and connected to the network. You must restart your computer for disabling IPv6 components to take effect.
     - Global: Windows IP configuration settings for the local computer
     - All: both NIC and Global settings


エイリアス

なし

必須?

false

位置は?

11

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Password<SecureString>

Specifies the password, as a secure string, to decrypt the migration store. The secure string can be obtained by entering the command Read-Host -AsSecureString or Convertto-Securestring. Because the Password parameter is required, if it is not added to your command, you are prompted to specify a password after entering your command.


エイリアス

なし

必須?

true

位置は?

named

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Path<String>

Specifies the path to the migration store from which you want to import Windows features and operating system settings. The path must be a well-formed local or Universal Naming Convention (UNC) path; if it is a share on a remote computer, the share must be notated as a drive letter on the local computer. The path length cannot be longer than 246 characters. Wildcard characters are not supported. Because the Path parameter is required, if it is not added to your command, you are prompted to specify a path after entering your command.


エイリアス

なし

必須?

true

位置は?

9

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-SourcePhysicalAddress<String[]>

Specifies, in double quotations, the physical addresses of the source network interface cards (NICs) from which to import IP settings. To specify multiple source physical addresses, use commas to separate each address. The number of source physical addresses must be the same as the number of destination physical addresses specified in the TargetPhysicalAddress parameter. Wildcard characters are not supported. This parameter is required when migrating NIC or all IP configurations.


エイリアス

なし

必須?

false

位置は?

7

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-TargetPhysicalAddress<String[]>

Specifies, in double quotations, the physical addresses of the destination network interface cards (NICs) to which you want to apply IP settings. If you specify multiple destination physical addresses, use commas to separate each address. The number of destination physical addresses must be the same as the number of source physical addresses specified in the SourcePhysicalAddress parameter. Wildcard characters are not supported. This parameter is required when migrating NIC or all IP configurations.


エイリアス

なし

必須?

false

位置は?

10

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-User<String>

Specify the type of local user accounts to import from the migration store. The following are acceptable values for this parameter:
     - Enabled: import only enabled local users
     - Disabled: import only disabled local users
     - All: import both enabled and disabled local users

User passwords are not migrated. Users must create a password the first time they log on to the server. Only the "User Name" and "Account is Disabled" properties are migrated.


エイリアス

なし

必須?

false

位置は?

4

既定値

なし

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。


必須?

false

位置は?

named

既定値

false

パイプライン入力を許可する

false

ワイルドカード文字を許可する

false

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (http://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

  • Microsoft.Windows.ServerManager.Migration.MigrationResult []

  • The Windows Server Migration Tools deployment log file is located in %windir%\Logs\SmigDeploy.log. Other Windows Server Migration Tools log files are created at the following locations:
         - %windir%\Logs\ServerMigration.log
         - On Windows Server 2008 and later versions: %localappdata%\SvrMig\Log
         - On Windows Server 2003: %userprofile%\Local Settings\Application Data\SvrMig\Log

    If the log files cannot be created at these locations, ServerMigration.log and SmigDeploy.log will be created at %temp%, and other logs will be created at %windir%\System32.

    The maximum size of all log files (in MB) is stored in the following registry key. When the log file grows larger than the size specified in the registry key, the log file is deleted. Logging begins again in a new log file that uses the same file name and path. The default maximum log size is 200 MB.
         - Key: HKLM\Software\Microsoft\ServerMigration
         - Value: MaxLogSize (REG_DWORD)
         - Data: Whole numbers between 1 and 1000 (represents log size, in MB)

EXAMPLE 1

This sample command imports the Dynamic Host Configuration Protocol (DHCP) Server, and all other Windows features required by this technology. The command also import local user accounts, local groups, and group memberships to the location c:\temp\store that is specified in the -Path parameter.

Entering the password to decrypt the migration store is required. Because a password is not provided in this sample command, after you enter the command, the user is prompted to enter a password for encrypting the migrated data. Password characters are displayed as asterisks (*). When the password is entered, the value is passed to the command as a SecureString.

By using the -Verbose parameter, the command also displays detailed information about the migration operation.


PS C:\> Import-SmigServerSetting -Feature "DHCP" -User All -Group -Path "c:\temp\store" -Verbose

EXAMPLE 2

This sample command imports the IP configuration from the migration store specified at c:\temp\store, and applies it to the local server. The IP configuration from the network interface card (NIC) with the physical address 00-13-D3-F7-A1-3A is migrated to the NIC with the physical address 11-13-D3-F7-A1-3A, and from the NIC with the physical address 00-13-D3-F7-A1-4A to the NIC with the physical address 11-13-D3-F7-A1-4A. This command also instructs the migration tools to import Windows IP configuration settings such as DNS Suffix Search List settings and Disable IPv6 registry key value.

The command also instructs the migration tools to display the string "Enter a Password:" to prompt users to enter the password to decrypt the migration store. Password characters are displayed as asterisks (*). When the password is entered, the value is passed to the command as a SecureString.

By using the -Verbose parameter, the command also displays detailed information about the migration operation.


PS C:\> Import-SmigServerSetting -IPConfig All -SourcePhysicalAddress "00-13-D3-F7-A1-3A","00-13-D3-F7-A1-4A" -TargetPhysicalAddress "11-13-D3-F7-A1-3A","11-13-D3-F7-A1-4A" -Path "c:\temp\store" -Password (Read-Host "Enter a Password:" -AsSecureString)-Verbose

EXAMPLE 3

This sample command imports a set of Windows features that have already been retrieved by using the Get-SmigServerFeature cmdlet.

The first line of the command retrieves role or feature objects specified by using the Get-SmigServerFeature cmdlet, and saves them in the $c variable. The second line of the command imports the Windows features represented by the $c variable from the migration store that is specified in the -Path parameter, c:\temp\store.

Entering the password to decrypt the migration store is required. Because a password is not provided in this sample command, after you enter the command, the user is prompted to enter a password for encrypting the migrated data. Password characters are displayed as asterisks (*). When the password is entered, the value is passed to the command as a SecureString.

By using the -Verbose parameter, the command also displays detailed information about the migration operation.


PS C:\> $c = Get-SmigServerFeature -Path "c:\temp\store"
PS C:\> Import-SmigServerSetting -Feature $c -Path "c:\temp\store" -Verbose

EXAMPLE 4

This sample command pipes a set of features that have already been retrieved by using the Get-SmigServerFeature cmdlet to the Import-SmigServerSetting cmdlet.

The first part of the command, before the pipe (|) character, retrieves all role or feature objects listed by using the Get-SmigServerFeature cmdlet that are found in the store specified by the Path parameter. The second part of the command imports those Windows features that are both listed by Get-SmigServerFeature and available in the migration store.

Entering the password to decrypt the migration store is required. Because a password is not provided in this sample command, after you enter the command, the user is prompted to enter a password for encrypting the migrated data. Password characters are displayed as asterisks (*). When the password is entered, the value is passed to the command as a SecureString.

By using the -Verbose parameter, the command also displays detailed information about the migration operation.


PS C:\> Get-SmigServerFeature -Path "c:\temp\store" | Import-SmigServerSetting -Path "c:\temp\store" -Verbose

EXAMPLE 5

In this example, the first command convert the store encryption password, represented by "password," to a secure string, and store it in the variable $pass. The second command imports all local user accounts, uses the value of the variable $pass as the password to decrypt the migration store.

By using the -Verbose parameter, the command also displays detailed information about the migration operation.


PS C:\> $pass = convertto-securestring -string "password" -asplaintext -force
PS C:\> Import-SmigServerSetting -User All -Password $pass -Path "c:\store" -Verbose

コミュニティの追加

追加
表示: