Set-CMFileReplicationRoute

Set-CMFileReplicationRoute

Changes settings for a file replication route in Configuration Manager.

構文

Parameter Set: SetFileReplicationRouteByLimited
Set-CMFileReplicationRoute -DestinationSiteCode <String> -Limited -SourceSiteCode <String> [-FileReplicationAccountName <String> ] [-LimitAvailableBandwidthPercentage <Int32> ] [-LimitedTimePeriodEnd <Int32> ] [-LimitedTimePeriodStart <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: SetFileReplicationRouteByPulseMode
Set-CMFileReplicationRoute -DestinationSiteCode <String> -PulseMode -SourceSiteCode <String> [-DataBlockSizeKB <Int32> ] [-DelayBetweenDataBlocksSeconds <Int32> ] [-FileReplicationAccountName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: SetFileReplicationRouteBySchedule
Set-CMFileReplicationRoute -ControlNetworkLoadSchedule -DestinationSiteCode <String> -SourceSiteCode <String> [-AvailabilityLevel <AvailabilityLevel> {All | Closed | High | MediumHigh} ] [-DaysOfWeek {Friday | Monday | Saturday | Sunday | Thursday | Tuesday | Wednesday}[] ] [-TimePeriodEnd <Int32> ] [-TimePeriodStart <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: SetFileReplicationRouteByUnlimited
Set-CMFileReplicationRoute -DestinationSiteCode <String> -SourceSiteCode <String> -Unlimited [-FileReplicationAccountName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

詳細説明

The Set-CMFileReplicationRoute cmdlet changes settings for a file replication route from Microsoft System Center 2012 Configuration Manager. System Center 2012 Configuration Manager uses file replication routes to transfer file-based data between sites in a hierarchy. Each file replication route identifies a destination site to which file-based data can transfer.

File replication routes were known as addresses in versions of Configuration Manager before System Center 2012 Configuration Manager. The functionality of file replication routes is the same as that of addresses in earlier versions.

パラメーター

-AvailabilityLevel<AvailabilityLevel>

Specifies a value that indicates the priorities for which the scheduled restriction allows. The system allows all priorities, no priorities, high priority only or high and medium priority. Valid values are:

-- All
-- Closed
-- High
-- MediumHigh

-ControlNetworkLoadSchedule

Indicates that scheduled replication controls network load.

-DataBlockSizeKB<Int32>

Specifies a data block size, in kilobytes.

-DaysOfWeek<DaysOfWeek[]>

Specifies an array of values that indicate when the file replication runs for this route. Valid values are:

-- Friday
-- Saturday
-- Sunday
-- Monday
-- Tuesday
-- Wednesday
-- Thursday

-DelayBetweenDataBlocksSeconds<Int32>

Specifies the delay between transmission of data blocks.

-DestinationSiteCode<String>

Specifies the destination site in the file replication route that you change by using a site code.

-FileReplicationAccountName<String>

Specifies the account that Configuration Manager uses to install a site on the specified server and maintain communications between the site and other sites. This account must have local administrative credentials.

-LimitAvailableBandwidthPercentage<Int32>

Specifies the percentage of available bandwidth to restrict on a network replication route.

-Limited

Indicates that bandwidth for a file replication route is limited.

-LimitedTimePeriodEnd<Int32>

Specifies when the time period of limited bandwidth ends.

-LimitedTimePeriodStart<Int32>

Specifies when the time period of limited bandwidth starts.

-PulseMode

Indicates that file replication uses data block size and delays between transmissions. Use this parameter when you have low network bandwidth between sites.

-SourceSiteCode<String>

Specifies the source site in the file replication route that you change by using a site code.

-TimePeriodEnd<Int32>

Specifies the end time for file replication.

-TimePeriodStart<Int32>

Specifies the start time for file replication.

-Unlimited

Indicates that bandwidth for a file replication route is unlimited.

-Confirm

コマンドレットを実行する前に、ユーザーに確認を求めます。

-WhatIf

コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。

<CommonParameters>

このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。

入力

入力型は、コマンドレットにパイプできるオブジェクトの型です。

出力

出力型は、コマンドレットによって生成されるオブジェクトの型です。

例

Example 1: Specify a file replication route by using a replication account name

This command specifies a file replication route between the source site named CM2 and the destination site named SS2. It uses the user account name 11\12 for file replication.

PS C:\> Set-CMFileReplicationRoute -SourceSiteCode "CM2" -DestinationSiteCode "SS2" -FileReplicationAccountName "11\12" -Unlimited

Example 2: Specify a file replication route by using a source and destination site names

This command specifies a file replication route between the source site named CM2 and the destination site named SS2. It schedules file replication for Fridays and Sundays.

PS C:\> Set-CMFileReplicationRoute -SourceSiteCode "CM2" -DestinationSiteCode "SS2" -ControlNetworkLoadSchedule -DaysOfWeek Friday, Sunday -AvailabilityLevel All

関連トピック

Get-CMFileReplicationRoute

New-CMFileReplicationRoute

Remove-CMFileReplicationRoute