Wait-FsrmStorageReport
Wait-FsrmStorageReport
Waits for a period of time or until storage reports is finished running.
構文
Parameter Set: Query (cdxml)
Wait-FsrmStorageReport [-Name] <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-Timeout <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Wait-FsrmStorageReport -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [-Timeout <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Wait-FsrmStorageReport cmdlet waits for a period of time or until one or more storage reports are finished running. The cmdlet returns when the server finishes running the storage reports or when the time that you specify in the Timeout parameter has elapsed.
パラメーター
-AsJob
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など、コンピューター名またはセッション オブジェクトを入力します。既定値は、ローカル コンピューターで実行中の現在のセッションです。
エイリアス |
Session |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-InputObject<CimInstance[]>
このコマンドレットへの入力を指定します。このパラメーターを使用するか、パイプを使用して入力をこのコマンドレットに渡すことができます。
エイリアス |
なし |
必須? |
true |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
True (ByValue) |
ワイルドカード文字を許可する |
false |
-Name<String[]>
Specifies an array of names of storage reports.
エイリアス |
なし |
必須? |
true |
位置は? |
2 |
既定値 |
なし |
パイプライン入力を許可する |
True (ByPropertyName) |
ワイルドカード文字を許可する |
false |
-ThrottleLimit<Int32>
このコマンドレットを実行するために確立できる最大同時操作数を指定します。このパラメーターを省略するか、値として 0
を入力した場合、Windows PowerShell® では、コンピューターで実行している CIM コマンドレットの数に基づいて、コマンドレットに対する最適なスロットル制限を計算します。スロットル制限は現在のコマンドレットのみに適用され、セッションまたはコンピューターには適用されません。
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Timeout<Int32>
Specifies the number of seconds to wait for reports to complete. The cmdlet returns when the period expires or the report completes. To wait indefinitely, set the value to –1. The value must be in the range from –1 through 2,147,483.
エイリアス |
なし |
必須? |
false |
位置は? |
named |
既定値 |
なし |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-Confirm
コマンドレットを実行する前に、ユーザーに確認を求めます。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
-WhatIf
コマンドレットを実行するとどのような結果になるかを表示します。コマンドレットは実行されません。
必須? |
false |
位置は? |
named |
既定値 |
false |
パイプライン入力を許可する |
false |
ワイルドカード文字を許可する |
false |
<CommonParameters>
このコマンドレットは次の共通パラメーターをサポートします。-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、-OutVariable.詳細については、以下を参照してください。 about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216)。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットによって生成されるオブジェクトの型です。
例
Example 1: Wait for a storage report
The first command starts the report named "Monthly report".
The second command waits for the report to finish running.
PS C:\> Start-FsrmStorageReport -Name "Monthly report"
PS C:\> Wait-FsrmStorageReport -Name "Monthly report"
Example 2: Wait for and stop the storage report
This example waits for the report to finish running and then stops the report.
The first command starts the report named "Monthly report".
PS C:\> Start-FsrmStorageReport -Name "Monthly report"
The second command waits for the report to finish running. If the report is not completed in 10 minutes, the server ends the report job and the cmdlet returns.
PS C:\> Wait-FsrmStorageReport -Name "Monthly report" -Timeout 600
The third command ensures that the report has stopped running.
PS C:\> Stop- FsrmStorageReport -Name "Monthly report"