Disable-DnsServerPolicy
Disable-DnsServerPolicy
Disables DNS server policies.
構文
Parameter Set: Disable0
Disable-DnsServerPolicy [-Level] <String> {Zone | Server} [[-Name] <String> ] [[-ZoneName] <String> ] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
詳細説明
The Disable-DnsServerPolicy cmdlet disables Domain Name System (DNS) server policies. You can disable both query resolution policies and zone transfer policies. Specify a single policy by name. If you do not specify a name, this cmdlet disables all policies for the zone or domain that you specify.
パラメーター
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
Session |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ComputerName<String>
Specifies a DNS server. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
Aliases |
Cn |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Force
ユーザーの確認を求めることなく、コマンドを強制的に実行します。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InformationAction<System.Management.Automation.ActionPreference>
Aliases |
infa |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-InformationVariable<System.String>
Aliases |
iv |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Level<String>
Specifies which level at which to disable policies. このパラメーターに指定できる値は、次のとおりです。 Zone and Server.
Aliases |
none |
必須/オプション |
true |
位置 |
2 |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Name<String>
Specifies the name of the policy to disable.
Aliases |
none |
必須/オプション |
false |
位置 |
3 |
既定値 |
none |
パイプライン入力の受け入れ |
true (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-ThrottleLimit<Int32>
コマンドレットを実行する際に確立できる同時実行操作の最大数を指定します。このパラメーターを省略するか、値 0
を入力した場合、コンピューター上で実行されている CIM コマンドレットの数に基づいて、コマンドレットに最適なスロットル制限が Windows PowerShell® によって計算されます。スロットル制限は、セッションやコンピューターではなく、現在のコマンドレットにのみ適用されます。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ZoneName<String>
Specifies the name of a DNS zone in which to disable policies.
Aliases |
none |
必須/オプション |
false |
位置 |
4 |
既定値 |
none |
パイプライン入力の受け入れ |
true (ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
<WorkflowParameters>
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
使用例
Example 1: Disable a zone level policy
This command disables a zone level policy named Policy07. This policy can be either a query resolution policy or a zone transfer policy.
PS C:\> Disable-DnsServerPolicy -Level Zone -Name "Policy07" -ZoneName "EuropeZone"
Example 2: Disable a server level policy
This command disables a server level policy named Policy22.
PS C:\> Disable-DnsServerPolicy -Level Server -Name "Policy22"
Example 3: Disable all zone level policies
This command disables all the policies in the zone named EuropeZone.
PS C:\> Disable-DnsServerPolicy -Level Zone -ZoneName "EuropeZone"
Example 4: Disable all server level policies
This command disables all the server level policies.
PS C:\> Disable-DnsServerPolicy -Level Server