Add-VMSwitchTeamMember
Add-VMSwitchTeamMember
Adds members to a virtual switch team.
構文
Parameter Set: SwitchName_NetAdapterInterfaceDescription
Add-VMSwitchTeamMember [-VMSwitchName] <String[]> [-CimSession <CimSession[]> ] [-ComputerName <String[]> ] [-Credential <PSCredential[]> ] [-NetAdapterInterfaceDescription <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchName_NetAdapterName
Add-VMSwitchTeamMember [-VMSwitchName] <String[]> [-CimSession <CimSession[]> ] [-ComputerName <String[]> ] [-Credential <PSCredential[]> ] [-NetAdapterName <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchObject_NetAdapterInterfaceDescription
Add-VMSwitchTeamMember [-VMSwitch] <VMSwitch[]> [-CimSession <CimSession[]> ] [-ComputerName <String[]> ] [-Credential <PSCredential[]> ] [-NetAdapterInterfaceDescription <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchObject_NetAdapterName
Add-VMSwitchTeamMember [-VMSwitch] <VMSwitch[]> [-CimSession <CimSession[]> ] [-ComputerName <String[]> ] [-Credential <PSCredential[]> ] [-NetAdapterName <String[]> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]
詳細説明
The Add-VMSwitchTeamMember cmdlet adds adapters as members to a virtual switch team.
パラメーター
-CimSession<CimSession[]>
リモート セッションまたはリモート コンピューターでコマンドレットを実行します。コンピューター名またはセッション オブジェクト (New-CimSession コマンドレットや Get-CimSession コマンドレットの出力など) を入力します。既定値は、ローカル コンピューター上の現在のセッションです。
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-ComputerName<String[]>
Specifies one or more Hyper-V hosts that runs this cmdlet. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
Aliases |
PSComputerName |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByPropertyName) |
ワイルドカード文字の受け入れ |
false |
-Credential<PSCredential[]>
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-NetAdapterInterfaceDescription<String[]>
Specifies an array of interface descriptions of the virtual network adapters that this cmdlet adds to the switch team.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-NetAdapterName<String[]>
Specifies an array of names of virtual network adapters that this cmdlet adds to the switch team.
Aliases |
InterfaceAlias |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Passthru
Indicates that this cmdlet returns the Microsoft.HyperV.PowerShell.VMSwitch object that it modifies.
Aliases |
none |
必須/オプション |
false |
位置 |
named |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-VMSwitch<VMSwitch[]>
Specifies an array of virtual switches that this cmdlet configures. To obtain a VMSwitch object, use the Get-VMSwitch cmdlet.
Aliases |
none |
必須/オプション |
true |
位置 |
1 |
既定値 |
none |
パイプライン入力の受け入れ |
true(ByValue) |
ワイルドカード文字の受け入れ |
false |
-VMSwitchName<String[]>
Specifies an array of names of virtual switches that this cmdlet configures.
Aliases |
SwitchName |
必須/オプション |
true |
位置 |
1 |
既定値 |
none |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-Confirm
コマンドレットを実行する前に確認メッセージを表示します。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
-WhatIf
コマンドレットが実行された場合に何が起きるのかを示します。コマンドレットは実行されません。
必須/オプション |
false |
位置 |
named |
既定値 |
false |
パイプライン入力の受け入れ |
false |
ワイルドカード文字の受け入れ |
false |
<CommonParameters>
このコマンドレットは共通のパラメーターをサポートしています(-Verbose、-Debug、-ErrorAction、-ErrorVariable、-OutBuffer、および -OutVariable)。詳細については、TechNet の「 「about_CommonParameters」 (https://go.microsoft.com/fwlink/p/?LinkID=113216) を参照してください。
入力
入力型は、コマンドレットにパイプできるオブジェクトの型です。
出力
出力型は、コマンドレットが出力するオブジェクトの型です。
Microsoft.HyperV.PowerShell.VMSwitch
This cmdlet returns a VMSwitch object, if you specify the Passthru parameter.
使用例
Example 1: Add network adapters to a switch team
The first command gets the virtual switch team named Switch03, and then stores it in the $VMSwitch variable.
The second command adds the network adapters named Adapter01 and Adapter04 as team members to the switch team in $VMSwitch.
PS C:\> $VMSwitch = Get-VMSwitch -Name "Switch03"
PS C:\> Add-VMSwitchTeamMember -VMSwitch $VMSwitch -NetAdapterName "Adapter01","Adapter04"