Add-DhcpServerv4MulticastScope
Add-DhcpServerv4MulticastScope
Adds a multicast scope on the DHCP server.
구문
Parameter Set: Add0
Add-DhcpServerv4MulticastScope [-Name] <String> [-StartRange] <IPAddress> [-EndRange] <IPAddress> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Description <String> ] [-ExpiryTime <DateTime> ] [-LeaseDuration <TimeSpan> ] [-PassThru] [-State <String> ] [-ThrottleLimit <Int32> ] [-Ttl <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-DhcpServerv4MulticastScope cmdlet adds a multicast scope on the Dynamic Host Configuration Protocol (DHCP) server.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the DNS name or IP address of the target computer that runs the DHCP Server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description of the multicast scope. The default value is null.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EndRange<IPAddress>
Specifies the end address of the range for the scope.
별칭 |
없음 |
필수 여부 |
true |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ExpiryTime<DateTime>
Specifies the expiry time of the multicast scope. The default value is infinite.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LeaseDuration<TimeSpan>
Specifies the duration of the IP address lease. The default value 30 days.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies a name for the multicast scope.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-StartRange<IPAddress>
Specifies the start address of the range of IP addresses for the scope.
별칭 |
없음 |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-State<String>
Specifies the state of the scope. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Active
-- Inactive
The default value is Active.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Ttl<UInt32>
Specifies the number of routers through which multicast traffic passes. The default value is 32.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Add an inactive multicast scope
This command creates an inactive multicast scope named Multicast_AudioConference on the DHCP server named DhcpServer01.Contoso.com. The command specifies the lease duration of 20 days for allocating addresses to participants of audio conferences. You can allocate a single multicast address to multiple clients. The command specifies that the traffic passes through 20 routers.
PS C:\> Add-DhcpServerv4MulticastScope -ComputerName "DhcpServer01.Contoso.com" -Name "Multicast_AudioConference" -StartRange 224.0.0.0 -EndRange 224.0.0.30 -State Inactive -Ttl 20-LeaseDuration 20
Example 2: Add an active multicast scope
This command creates an active multicast scope named Multicast_AudioConference on the DHCP server named DhcpServer01.Contoso.com. You can use the multicast scope on the DHCP server service for allocating addresses to participants of video conferences. You can allocate a single multicast address to multiple clients. The traffic passes through 32 routers, and the lease duration is 30 days.
PS C:\> Add-DhcpServerv4MulticastScope -ComputerName "DhcpServer01.Contoso.com" -Name "Multicast_VideoConference" -StartRange 224.0.0.50 -EndRange 224.0.0.80
관련 항목
Get-DhcpServerv4MulticastScope