Remove-DhcpServerv4MulticastScope
Remove-DhcpServerv4MulticastScope
Removes multicast scopes.
구문
Parameter Set: Remove2
Remove-DhcpServerv4MulticastScope -Name <String[]> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Remove-DhcpServerv4MulticastScope cmdlet removes the specified multicast scopes from the Dynamic Host Configuration Protocol (DHCP) server. When you remove a multicast scope, the DHCP server cannot assign the range of IP addresses to DHCP clients.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the DNS name or IP address of the target computer that runs the DHCP Server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
If you specify this parameter, the cmdlet removes the scope regardless if there are active leases in the scope.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String[]>
Specifies an array of names of multicast scopes.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Remove a multicast scope by using a name
This command removes the multicast scope named Multicast_VideoConference from the DHCP server named DhcpServer01.Contoso.com.
PS C:\> Remove-DhcpServerv4MulticastScope -Name "Multicast_VideoConference" -ComputerName "DhcpServer01.Contoso.com"
Example 2: Remove a multicast scope without a confirmation
This command removes the multicast scope named Multicast_AudioConference from the DHCP server named DhcpServer01.Contoso.com. The cmdlet does not prompt the user for confirmation, regardless if the scopes are active or contain active client leases.
PS C:\> Remove-DhcpServerv4MulticastScope -Name "Multicast_AudioConference" -ComputerName "DhcpServer01.Contoso.com" -Force
Example 3: Remove inactive multicast scopes
This command removes all of the disabled multicast scopes on the DHCP Server service. The Get-DhcpServerv4MulticastScope cmdlet returns the multicast scope objects and passes the objects to the Where-Object cmdlet by using the pipeline operator. For more information, type Get-Help Where-Object
.
The Where-Object cmdlet filters the multicast scope objects for inactive multicast scopes, and passes the objects to the Remove-DhcpServerv4MulticastScope cmdlet by using the pipeline operator. The Remove-DhcpServerv4MulticastScope cmdlet removes the inactive scopes.
PS C:\> Get-DhcpServerv4MulticastScope | Where-Object -FilterScript { $_.State -Eq "Inactive" } | Remove-DhcpServerv4MulticastScope -Force -PassThru
관련 항목
Get-DhcpServerv4MulticastScope
Set-DhcpServerv4MulticastScope