Remove-DhcpServerv4MulticastLease
Remove-DhcpServerv4MulticastLease
Removes one or more multicast scope leases for a specified multicast scope or IP address.
구문
Parameter Set: Remove1
Remove-DhcpServerv4MulticastLease [-Name] <String> [[-IPAddress] <IPAddress[]> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Remove-DhcpServerv4MulticastLease cmdlet removes one or more multicast scope leases for a specified multicast scope. Specify IP addresses to indicate which leases in the multicast scope to remove. If you do not specify the IPAddress parameter, this cmdlet removes all leases in the specified multicast scope.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the Domain Name System (DNS) name or IP address of the target computer that runs the Dynamic Host Configuration Protocol (DHCP) Server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IPAddress<IPAddress[]>
Specifies an array of IP addresses to delete.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of a multicast scope.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
EXAMPLE 1: Remove address leases for a range of addresses
This command removes the multicast IP address leases for the addresses 224.0.0.50 through 224.0.0.51. The command specifies the multicast scope Multicast_VideoConference on the computer named DhcpServer01.Contoso.com.
PS C:\> Remove-DhcpServerv4MulticastLease -Name "Multicast_VideoConference" -IPAddress 224.0.0.50,224.0.0.51 -ComputerName "DhcpServer01.Contoso.com"
Example 2: Remove address leases by scope name
This command removes all of the multicast IP address leases for the scope named Multicast_AudioConference.
PS C:\> Remove-DhcpServerv4MulticastLease -Name "Multicast_AudioConference" -ComputerName "DhcpServer01.Contoso.com"