Set-DhcpServerv4MulticastScope
Set-DhcpServerv4MulticastScope
Modifies the properties of a multicast scope.
구문
Parameter Set: Set3
Set-DhcpServerv4MulticastScope [-Name] <String> [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-Description <String> ] [-EndRange <IPAddress> ] [-ExpiryTime <DateTime> ] [-LeaseDuration <TimeSpan> ] [-NewName <String> ] [-PassThru] [-StartRange <IPAddress> ] [-State <String> ] [-ThrottleLimit <Int32> ] [-Ttl <UInt32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DhcpServerv4MulticastScope cmdlet modifies the properties of a multicast scope on the Dynamic Host Configuration Protocol (DHCP) server.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ComputerName<String>
Specifies the DNS name or IP address of the target computer that runs the DHCP Server service.
별칭 |
Cn |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description for the scope. The default value is null.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EndRange<IPAddress>
Specifies the end address of the range for the scope.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ExpiryTime<DateTime>
Specifies the expiry time of the multicast scope. The default value is infinite.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LeaseDuration<TimeSpan>
Specifies the duration of the IP address lease. The default value 30 days.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of a multicast scope.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NewName<String>
Specifies a new name for the multicast scope.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-StartRange<IPAddress>
Specifies the start address of the range of IP addresses for the scope.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-State<String>
Specifies the state of the scope. Only an active scope responds to client requests. An inactive scope exists on the server but is dormant and not functional. It does not respond. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Active
-- Inactive
The default value is Active.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Ttl<UInt32>
Specifies the number of routers through which multicast traffic can pass. The default value is 32.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Modify the properties of a multicast scope
This command activates the multicast scope named Multicast_VideoConference and renames it Multicast_VideoConferenceBuilding1. The command sets the lease duration to 40 days and sets the expiry time of the multicast scope.
PS C:\> Set-DhcpServerv4MulticastScope Name "Multicast_VideoConference" -ComputerName "DhcpServer01.Contoso.com" -ExpiryTime "1/1/2014 0:01 AM" -LeaseDuration 40 -NewName "Multicast_VideoConferenceBuilding1" -State Active
관련 항목
Get-DhcpServerv4MulticastScope