Stop-BgpPeer
Stop-BgpPeer
Stops routing sessions for BGP peers.
구문
Parameter Set: Stop5
Stop-BgpPeer [-Name] <String[]> [-CimSession <CimSession[]> ] [-Force] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Stop-BgpPeer cmdlet stops routing sessions for Border Gateway Protocol (BGP) peers. Use the Start-BgpPeer cmdlet to start a routing session. When you stop a session, both peer routers lose all the information learned from each other.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자에게 확인 메시지를 표시하지 않고 명령을 강제 실행합니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Name<String[]>
Specifies an array of names. The cmdlet starts routing sessions for the named peers.
별칭 |
PeerList,PeerId,PeerName |
필수 여부 |
true |
위치 |
2 |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name of the routing domain as a string. The name is a unique, for the multitenant gateway, user-defined alphanumeric string.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지를 표시합니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행되는 경우 발생할 결과를 보여 줍니다. cmdlet은 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
예
Example 1: Stop a routing session
This command stops the session for the peer named Tenant18. This command specifies the Force parameter, so the command does not prompt you for confirmation.
PS C:\> Stop-BgpPeer -Name "Tenant18" -Force
Example 2: Stop all sessions
This command gets all the peers by using the Get-BgpPeer cmdlet, and then passes them to the current cmdlet by using the pipeline operator. The command stops the sessions for all the peers. This command does not specify the Force parameter, so it prompts the user for confirmation of each session to stop.
PS C:\> Get-BgpPeer | Stop-BgpPeer
Example 3: Stop a routing session in a multitenant evironment
This command stops the routing session for the peer named Tenant22 in the specified routing domain of a multitenant environment.
PS C:\> Stop-BgpPeer -Name "TenantSite22" -RoutingDomain "Rd001"