Add-BgpRouter
Add-BgpRouter
Adds a BGP router.
구문
Parameter Set: Add0
Add-BgpRouter -BgpIdentifier <IPAddress> -LocalASN <UInt32> [-AsJob] [-CimSession <CimSession[]> ] [-CompareMEDAcrossASN <Boolean> ] [-DefaultGatewayRouting <Boolean> ] [-IPv6Routing <IPv6RoutingState> ] [-LocalIPv6Address <IPAddress> ] [-PassThru] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Add-BgpRouter cmdlet adds a Border Gateway Protocol (BGP) router. In a multitenant deployment, the cmdlet adds a BGP router for the routing domain or a tenant. In a non-multitenant deployment, the cmdlet configures the BGP router for the local computer. In a multitenant deployment, you must specify the RoutingDomain parameter. In a non-multitenant deployment, do not specify the RoutingDomain parameter.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-BgpIdentifier<IPAddress>
Specifies the Internet IPv4 address of a local BGP router.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CompareMEDAcrossASN<Boolean>
Indicates whether the BGP router compares Multi-Exit Discriminator (MED) values across different autonomous systems (AS).
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DefaultGatewayRouting<Boolean>
Indicates whether the cmdlet enables routing of the unresolvable routes to the default gateway.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPv6Routing<IPv6RoutingState>
Specifies the state of IPv6 routing for the BGP router. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enabled
-- Disabled
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalASN<UInt32>
Specifies the local autonomous system number (ASN) for the local router.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-LocalIPv6Address<IPAddress>
Specifies the Internet IPv6 address of a local BGP router. This parameter specifies the global or site-local Internet IPv6 address for the local BGP router. The BGP router uses this IP address as the next hop value in the IPv6 route advertisements.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name, as a string, of a tenant. The ID of a routing domain is a user-defined alphanumeric string. A routing domain ID must be unique.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpRouterConfig
예제
Example 1: Add a local BGP router
This command adds a local BGP router for a tenant. The command specifies the IP address and ASN of the local router.
PS C:\> Add-BgpRouter -BgpIdentifier "192.168.1.10" -LocalASN 64522 -PassThru
Example 2: Add a local BGP router for a routing domain
This command adds a local BGP router in a multi-tenant environment for the routing domain named Rd_001. The command specifies a local BGP router that has the IP address 14.1.1.10, and specifies the BGP router instance that has the local autonomous system number 64522.
PS C:\> Add-BgpRouter -RoutingDomain "Rd_001" -BgpIdentifier "10.1.1.10" -LocalASN 64522 -PassThru