Set-RemoteAccessRoutingDomain
Set-RemoteAccessRoutingDomain
Configures S2S VPN settings for a routing domain configuration.
구문
Parameter Set: EncryptionType
Set-RemoteAccessRoutingDomain [-Name] <String> [-AsJob] [-CimSession <CimSession[]> ] [-DnsIPAddress <IPAddress[]> ] [-EnableQoS <EnableQoS> ] [-EncryptionType <String> ] [-Force] [-InterimAccountingPeriodSec <UInt32> ] [-IPAddressRange <String[]> ] [-IPv6Prefix <String> ] [-MaximumVpnConnections <UInt32> ] [-NetBiosIPAddress <IPAddress[]> ] [-PassThru] [-RxBandwidthKbps <UInt64> ] [-TenantName <String[]> ] [-ThrottleLimit <Int32> ] [-TxBandwidthKbps <UInt64> ] [ <CommonParameters>]
Parameter Set: CustomPolicy
Set-RemoteAccessRoutingDomain [-Name] <String> -CustomPolicy [-AsJob] [-AuthenticationTransformConstant <AuthenticationTransformConstant> ] [-CimSession <CimSession[]> ] [-CipherTransformConstant <CipherTransformConstant> ] [-DHGroup <DHGroup> ] [-DnsIPAddress <IPAddress[]> ] [-EnableQoS <EnableQoS> ] [-EncryptionMethod <EncryptionMethod> ] [-Force] [-IdleDisconnectSec <UInt32> ] [-IntegrityCheckMethod <IntegrityCheckMethod> ] [-InterimAccountingPeriodSec <UInt32> ] [-IPAddressRange <String[]> ] [-IPv6Prefix <String> ] [-MaximumVpnConnections <UInt32> ] [-NetBiosIPAddress <IPAddress[]> ] [-PassThru] [-PfsGroup <PfsGroup> ] [-RxBandwidthKbps <UInt64> ] [-SaLifeTimeSec <UInt32> ] [-SaRenegotiationDataSizeKB <UInt32> ] [-TenantName <String[]> ] [-ThrottleLimit <Int32> ] [-TxBandwidthKbps <UInt64> ] [ <CommonParameters>]
자세한 설명
The Set-RemoteAccessRoutingDomain cmdlet configures site to site (S2S) virtual private network (VPN) settings for a routing domain.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AuthenticationTransformConstant<AuthenticationTransformConstant>
Specifies a transform constant. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- MD596
-- SHA196
-- SHA256128
-- GCMAES128
-- GCMAES192
-- GCMAES256
-- None
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
2 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CipherTransformConstant<CipherTransformConstant>
Specifies a cipher transform constant. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- DES
-- DES3
-- AES128
-- AES192
-- AES256
-- GCMAES128
-- GCMAES192
-- GCMAES256
-- None
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
1 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CustomPolicy
Indicates that the interface uses custom Internet Key Exchange (IKE) IPsec policies.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DHGroup<DHGroup>
Specifies the Diffie-Hellman (DH) group for the IKE policy. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- None
-- Group1
-- Group2
-- Group14
-- ECP256
-- ECP384
-- Group24
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
2 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DnsIPAddress<IPAddress[]>
Specifies an array of IP addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EnableQoS<EnableQoS>
Indicates whether to enable Quality of Service (QoS) on an interface. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Enabled
-- Disabled
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EncryptionMethod<EncryptionMethod>
Specifies the encryption method for IKE policy. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- DES
-- DES3
-- AES128
-- AES192
-- AES256
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
4 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EncryptionType<String>
Specifies the type of encryption. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- NoEncryption
-- RequireEncryption
-- OptionalEncryption
-- MaximumEncryption
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
RequireEncryption |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-IdleDisconnectSec<UInt32>
Specifies the time interval, in seconds, after which an idle connection is disconnected. Unless you disable idle timeout, an idle connection is disconnected after this time interval is exceeded.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
300 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IntegrityCheckMethod<IntegrityCheckMethod>
Specifies an integrity check method for the IPsec policy. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- MD5
-- SHA1
-- SHA256
-- SHA384
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
2 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InterimAccountingPeriodSec<UInt32>
Specifies a time interval, in seconds, for interim accounting.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPAddressRange<String[]>
Specifies an array of IP addresses to allocate to VPN clients. The array consists of a beginning IP address and an ending IP address.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-IPv6Prefix<String>
Specifies the IPv6 prefix used for IPv6 address assignment.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
fe80::/64 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-MaximumVpnConnections<UInt32>
Specifies the maximum number of concurrent VPN connections.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
100 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies the name of a routing domain.
별칭 |
RoutingDomainName,RoutingDomain |
필수 여부 |
true |
위치 |
1 |
기본값 |
null |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetBiosIPAddress<IPAddress[]>
Specifies an array of IP addresses for NetBIOS names.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PfsGroup<PfsGroup>
Specifies the PFS group in the IPsec policy.
-- PFS1
-- PFS2
-- PFS2048
-- ECP256
-- ECP384
-- PFSMM
-- PFS24
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
3 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RxBandwidthKbps<UInt64>
Specifies the receive, or ingress, bandwidth limit, in kilobits per second (Kbps).
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SaLifeTimeSec<UInt32>
Specifies the lifetime, in seconds, of a security association (SA). The SA is no longer valid after this time interval.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
7200 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SaRenegotiationDataSizeKB<UInt32>
Specifies the amount of data, in kilobytes (KB), that can be transferred using a security association (SA). When the limit is reached, the SA must be renegotiated.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
10000 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-TenantName<String[]>
Specifies an array of tenant names.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-TxBandwidthKbps<UInt64>
Specifies a transmit, or egress, bandwidth limit, in Kbps, for the interface.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#VpnRoutingDomainConfig
예제
Example 1: Modify the configuration for a routing domain
This command modifies configuration settings for a specified routing domain in a multitenant environment and displays the resulting configuration.
PS C:\> Set-RemoteAccessRoutingDomain -RoutingDomain Rd_01 -IPAddressRange @("10.0.0.1","10.0.0.10") -Passthru
Example 2: Modify configuration for IPv6 addresses and encryption
This command modifies configuration settings for a routing domain in a multitenant environment and displays the resulting configuration.
PS C:\> Set-RemoteAccessRoutingDomain -RoutingDomain Rd_01 -IPAddressRange @("10.0.0.1","10.0.0.10") -IPv6Prefix 3ffe::/64 -EncryptionType OptionalEncryption -Passthru
관련 항목
Disable-RemoteAccessRoutingDomain