Add-BgpCustomRoute
Add-BgpCustomRoute
Adds custom routes to the BGP routing table.
구문
Parameter Set: Add0
Add-BgpCustomRoute [-AsJob] [-CimSession <CimSession[]> ] [-Interface <String[]> ] [-Network <String[]> ] [-PassThru] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Add-BgpCustomRoute cmdlet adds custom routes from router interfaces and network prefixes to the Border Gateway Protocol (BGP) routing table. The cmdlet returns information about any errors that occur when you add the routes to the BGP routing table.
Use the Interface parameter to specify the router interfaces. Use the Network parameter to specify the network prefixes. Use the RoutingDomain parameter to specify the routing domain or tenant of the BGP router in a multitenant deployment.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Interface<String[]>
Specifies an array of names of router interfaces. The cmdlet adds the static routes from these interfaces to the BGP routing table.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Network<String[]>
Specifies an array of network prefixes, in Classless InterDomain Routing (CIDR) notation. The cmdlet adds the routing information for the network prefixes to the BGP routing table.
별칭 |
DestinationNetwork |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name, as a string, of the routing domain. The cmdlet adds the custom routes to the BGP routing table for this routing domain.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpCustomNetworkInfo
예제
Example 1: Add an interface to a BGP router
This command adds the interface named Ethernet to the local BGP router. The cmdlet adds all the unicast IP addresses of the interface to the BGP router.
PS C:\> Add-BgpCustomRoute -Interface "Ethernet" -PassThru
Example 2: Add a network prefix to a BGP router
This command adds the routing information from the network prefix 172.23.90.0/29 to the local BGP router.
PS C:\> Add-BgpCustomRoute -Network "172.23.90.0/29" -PassThru
Example 3: Add an interface and a network prefix to a BGP router for a routing domain
This command adds the routing information from the interface named VS1 and the network prefix 172.23.90.0 to the BGP router for the routing domain in a multitenant environment named Rd_001. The command includes the PassThru parameter, so the command sends a BgpCustomNetworkInfo object to the console.
PS C:\> Add-BgpCustomRoute -Interface "VS1" -Network "172.23.90/29" -RoutingDomain "Rd_001" -PassThru