Add-BgpCustomRoute
Add-BgpCustomRoute
Adds custom routes to the BGP routing table.
구문
Parameter Set: Add0
Add-BgpCustomRoute [-CimSession <CimSession[]> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-Interface <String[]> ] [-Network <String[]> ] [-PassThru] [-RoutingDomain <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Add-BgpCustomRoute cmdlet adds custom routes from router interfaces and network prefixes to the Border Gateway Protocol (BGP) routing table. The cmdlet returns information about any errors that occur when you add the routes to the BGP routing table.
Use the Interface parameter to specify the router interfaces. Use the Network parameter to specify the network prefixes. Use the RoutingDomain parameter to specify the routing domain or tenant of the BGP router in a multitenant deployment.
매개 변수
-CimSession<CimSession[]>
원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Interface<String[]>
Specifies an array of names of router interfaces. The cmdlet adds the static routes from these interfaces to the BGP routing table.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Network<String[]>
Specifies an array of network prefixes, in Classless InterDomain Routing (CIDR) notation. The cmdlet adds the routing information for the network prefixes to the BGP routing table.
별칭 |
DestinationNetwork |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RoutingDomain<String>
Specifies the name, as a string, of the routing domain. The cmdlet adds the custom routes to the BGP routing table for this routing domain.
별칭 |
RoutingDomainName |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0
을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 허용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)
<WorkflowParameters>
입력
입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.
출력
출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.
- Microsoft.Management.Infrastructure.CimInstance#BgpCustomNetworkInfo
예
Example 1: Add an interface to a BGP router
This command adds the interface named Ethernet to the local BGP router. The cmdlet adds all the unicast IP addresses of the interface to the BGP router.
PS C:\> Add-BgpCustomRoute -Interface "Ethernet" -PassThru
Example 2: Add a network prefix to a BGP router
This command adds the routing information from the network prefix 172.23.90.0/29 to the local BGP router.
PS C:\> Add-BgpCustomRoute -Network "172.23.90.0/29" -PassThru
Example 3: Add an interface and a network prefix to a BGP router for a routing domain
This command adds the routing information from the interface named VS1 and the network prefix 172.23.90.0 to the BGP router for the routing domain in a multitenant environment named Rd_001. The command includes the PassThru parameter, so the command sends a BgpCustomNetworkInfo object to the console.
PS C:\> Add-BgpCustomRoute -Interface "VS1" -Network "172.23.90/29" -RoutingDomain "Rd_001" -PassThru