Set-PcsvDeviceBootConfiguration

Set-PcsvDeviceBootConfiguration

Modifies the boot configuration on the remote hardware device.

구문

Parameter Set: InputObject (cdxml)
Set-PcsvDeviceBootConfiguration -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-OneTimeBootSource] <String> [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ByComputerName
Set-PcsvDeviceBootConfiguration [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> [[-Port] <UInt16> ] [-AsJob] [-Authentication <Authentication> ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-OneTimeBootSource] <String> [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-PcsvDeviceBootConfiguration cmdlet modifies the boot configuration for a remote hardware device. To retrieve the current boot configuration for a device, use the Get-PcsvDevice cmdlet.

The StructuredBootString property of the returned instance lists the valid boot sources, and the OneTimeBootSource property indicates whether one of the valid boot sources has already been configured to be the primary boot source for the next time the device undergoes a full restart.

매개 변수

-AsJob

-Authentication<Authentication>

Specifies an authentication method to use for devices managed by Web Services for Management (WS-Management). Do not use this parameter for devices managed by using Intelligent Platform Management Interface (IPMI). 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Basic
-- Digest
-- Default

If you specify Default for this parameter and a value of WSMAN for the ManagementProtocol parameter, the cmdlet uses Basic authentication.

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-Credential<PSCredential>

Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. This parameter specifies the credential for the remote hardware device.

-InputObject<CimInstance[]>

Specifies an array of devices, as MSFT_PCSVDevice objects, to manage. To obtain MSFT_PCSVDevice objects, use the Get-PcsvDevice cmdlet. This parameter specifies the credential for the remote hardware device.

-ManagementProtocol<ManagementProtocol>

Specifies a management protocol used to communicate with a device. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- WSMAN
-- IPMI

Refer to your hardware documentation for supported management protocols.

Specify WSMAN for devices that represent information by using Systems Management Architecture for Server Hardware (SMASH), Desktop and mobile Architecture for System Hardware (DASH) or Physical Computer System View profiles.

-OneTimeBootSource<String>

Specifies a one-time boot source, in the format CIM:<identifier>:<index>. For example, you can specify a boot source as CIM:Network:1. The StructuredBootString property of the PcsvDevice instance contains a list of valid boot sources.

-PassThru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-Port<UInt16>

Specifies a network port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default values:

-- IPMI and WSMAN over HTTP. Port 623
-- WSMAN over HTTPS. Port 664.

-SkipCACheck

Indicates that the client connects by using HTTPS without validating that a trusted CA signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.

-SkipCNCheck

Indicates that the certificate common name of the server does not need to match the hostname of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Specify this parameter only for remote operations with WS-Management devices that use the HTTPS protocol. Use this parameter only for trusted computers.

-SkipRevocationCheck

Indicates that the cmdlet skips the revocation check of server certificates. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Be sure to specify this parameter only for trusted computers.

-TargetAddress<String>

Specifies the name or IP address of the management port on the remote hardware device. For server hardware, this is typically a dedicated Baseboard Management Controller (BMC) IP address. For other devices, like network switches, this is the IP address of their management port. For desktop and mobile devices, the BMC sometimes shares the same IP address as the computer.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-TimeoutSec<UInt32>

Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.

-UseSSL

Indicates that the cmdlet connects to a remote device by using SSL. WS-Management encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  The PCSV device is only returned as output if the PassThru parameter is specified.

예제

Example 1 Modify the device boot configuration to use PXE boot

This example configures the boot source to use Pre-Boot Execution Environment (PXE) boot the next time the system boots.

The first command uses the Get-Credential cmdlet to get credentials, and stores the credentials in the variable named $MyCred. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.

The second command modifies the device boot configuration for the target computer, by using the OneTimeBootSource parameter to specify the boot configuration.

PS C:\> $MyCred = Get-Credential
PS C:\> Set-PCSVDeviceBootConfiguration -TargetAdress 10.1.12.43 -ManagementProtocol WSMan -Credential $MyCred -UseSSL -OneTimeBootSource "CIM:Network:1"

Example 2: Modify the device boot configuration to use the DVD drive

This example configures the boot source to use the DVD drive for the next time the system boots.

The first command uses the Get-Credential cmdlet to get credentials, and stores the credentials in the variable named $MyCred. The cmdlet prompts you for a user name and password. For more information, type Get-Help Get-Credential.

The second command uses the Get-PcsvDevice cmdlet to retrieve the configuration for the target computer, and passes the output to the Set-PcsvDeviceBootConfiguration cmdlet by using the pipeline operator.

PS C:\> $MyCred = Get-Credential
PS C:\> Get-PCSVDevice -TargetAddress 10.1.12.43 -ManagementProtocol WSMan -Credential $MyCred -UseSSL | Set-PcsvDeviceBootConfiguration -OneTimeBootSource "CIM:CD/DVD:1"

관련 항목

Get-PcsvDevice