Approve-WdsClient

Approve-WdsClient

Approves clients.

구문

Parameter Set: MultipleMachine
Approve-WdsClient [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: MultipleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachine
Approve-WdsClient -RequestId <UInt32> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

Parameter Set: SingleMachineUserAndJoinRights
Approve-WdsClient -JoinRights <JoinRights> -RequestId <UInt32> -User <String> [-AsJob] [-BootImagePath <String> ] [-BootProgram <String> ] [-CimSession <CimSession[]> ] [-DeviceName <String> ] [-JoinDomain <Boolean> ] [-OU <String> ] [-ReferralServer <String> ] [-ThrottleLimit <Int32> ] [-WdsClientUnattend <String> ] [ <CommonParameters>]

자세한 설명

The Approve-WdsClient cmdlet approves clients that need administrative approval. Unknown clients require approval before the server that runs Windows Deployment Services boots the client in the Pre-Boot Execution Environment (PXE). You can specify a single device to approve by using a request ID. The server that runs Windows Deployment Services allocates a request ID to a device. If you do not specify a client to approve, the cmdlet approves all pending clients.

At the time you approve an unknown client, you can also modify settings for the client. Use the New-WdsClient and Set-WdsClient cmdlets to create and modify pre-staged clients.

매개 변수

-AsJob

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-BootImagePath<String>

Specifies a path to the boot image. This is a relative path from the RemoteInstall share to the boot image file for the computer.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-BootProgram<String>

Specifies the relative path from the RemoteInstall share to the network boot program for the computer.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

별칭

Session

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-DeviceName<String>

Specifies the name of the computer associated with the pre-staged client. This is a sAMAccountName value.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-JoinDomain<Boolean>

Indicates whether to join the computer to a domain as the account specified by the User parameter.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-JoinRights<JoinRights>

Specifies the rights to assign to the account. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Full. Assigns full access rights, which includes the right to join the computer to the domain at any time.
-- JoinOnly. Requires the administrator to reset the computer account before the user can join the computer to the domain.

별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-OU<String>

Specifies the distinguished name of an OU. The cmdlet creates the computer account object in this location. If you do not specify this parameter, Windows Deployment Services creates the account in the default computer container in the domain of the server that runs Windows Deployment Services.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-ReferralServer<String>

Specifies the name of a server. If you specify a referral server, the computer connects to this Windows Deployment Services server to download the network boot program and boot image by using Trivial File Transfer Protocol (TFTP).

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-RequestId<UInt32>

Specifies the request ID that the server that runs Windows Deployment Services allocates to a device in the Pending Device database. If you do not specify this parameter, the cmdlet approves all all clients in the Pending Device database.

별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

True (ByValue, ByPropertyName)

와일드카드 문자 허용 여부

false

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-User<String>

Specifies a user, in the format DOMAIN\User or User@Domain. If you specify a value of $True for the JoinDomain parameter, the cmdlet assigns the user the right to join the computer to the domain specified by the Domain parameter. To join the client computer to the specified domain without granting any user rights, specify a value of $True for the JoinDomain parameter, but do not specify a user.

별칭

없음

필수 여부

true

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

-WdsClientUnattend<String>

Specifies an answer file as a relative path from the RemoteInstall share. This file contains information for the Windows Deployment Services client user interface screens, such as entering credentials, choosing an install image, and configuring the disk.

별칭

없음

필수 여부

false

위치

named

기본값

없음

파이프라인 입력 적용 여부

false

와일드카드 문자 허용 여부

false

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

  • Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsClient

예제

Example 1: Approve all pre-staged clients and modify settings

This command approves all pending pre-staged clients. The command also specifies a boot image, boot program, and referral server. The PXE boot process refers to the answer file specified by the WdsClientUnattend parameter.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies an OU for the computers.

PS C:\> Approve-WdsClient -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com" -ReferralServer "WindowsDS01" -WdsClientUnattend "WindowsDSClientUnattend\Unattend.xml"

Example 2: Approve all pre-staged clients and specify a user

This command approves all pending pre-staged clients. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so these computers join a domain. The command specifies the user TSQADOMAIN\PattiFuller and specifies an OU for the computers.

PS C:\> Approve-WdsClient -JoinRights JoinOnly -User "TSQADOMAIN\PattiFuller" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

Example 3: Approve a pre-staged client

This command approves a pre-staged client that has a request ID of seven, and assigns the device name TSQA004.

PS C:\> Approve-WdsClient -RequestId 7 -DeviceName "TSQA004"

Example 4: Approve a pre-staged client and modify settings

This command approves a pre-staged client that has a request ID of 22 and assigns the device name TSQA009. The command also specifies a boot image and boot program.

The JoinDomain parameter has a value of $True, so this computer joins a domain. The command specifies the user ITAdmin01@TSQADomain.Contoso.com and specifies an OU for the computer. The user has full join rights.

PS C:\> Approve-WdsClient -JoinRights Full -RequestId 22 -User "ITAdmin01@TSQADomain.Contoso.com" -BootImagePath "boot\x86\images\Contosox86boot.wim" -BootProgram "boot\x86\PxeBoot.com" -DeviceName "TSQA009" -JoinDomain $True -OU "OU=Unit21,CN=TSQAMain,DC=Contoso,DC=com"

관련 항목

Deny-WdsClient

Get-WdsClient

New-WdsClient

Remove-WdsClient

Set-WdsClient