Set-WdsBootImage

Set-WdsBootImage

Modifies settings of a boot image.

구문

Parameter Set: AutoStart
Set-WdsBootImage -Architecture <Architecture> -ImageName <String> -Multicast [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [ <CommonParameters>]

Parameter Set: BootImageName
Set-WdsBootImage -Architecture <Architecture> -ImageName <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-NewDescription <String> ] [-NewImageName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

Parameter Set: StopMulticastTransmission
Set-WdsBootImage -Architecture <Architecture> -ImageName <String> -StopMulticastTransmission [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-FileName <String> ] [-Force] [-NewDescription <String> ] [-NewImageName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Set-WdsBootImage cmdlet modifies information associated with a boot image in the Windows Deployment Services image store. You can use the cmdlet to change the name and description of the boot image, set the display order in the boot menu, and enable the boot image for multicast transmissions.

Specify the boot image by using the ImageName and Architecture parameters. If the image name and architecture do not uniquely identify the image, also specify the FileName parameter.

매개 변수

-Architecture<Architecture>

Specifies an architecture. This is the architecture of the boot image. Because you can use the same image name for boot images in different architectures, specify this this parameter to ensure that you modify the correct image. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- ARM
-- ia64
-- x64
-- x86

-AsJob

-CimSession<CimSession[]>

원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.

-DisplayOrder<UInt32>

Specifies the order in which images appear in the boot menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.

If two boot images have the same display order, the imported images appear in alphabetical order of file name. If you do not specify this parameter, the imported images appear in the middle of the list.

-FileName<String>

Specifies a file name. This is the file name of the boot image. Use this parameter to specify the file name for the boot image if the boot image name does not uniquely identify the image.

-Force

사용자 확인을 요구하지 않고 명령을 실행합니다.

If you specify this parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify this parameter, and you specified the Multicast parameter to enable an autocast transmission of the image, existing clients finish receiving the content, but no additional clients can join the multicast transmission.

-ImageName<String>

Specifies the name of an image. This is the name of the image to modify.

-Multicast

Indicates that the cmdlet enables an autocast transmission of the image. If you do not specify the TransmissionName parameter, Windows Deployment Services uses the image name of the imported image for the multicast.

-NewDescription<String>

Specifies a new description.

-NewImageName<String>

Specifies a name for the image.

-StopMulticastTransmission

Indicates that the cmdlet stops the multicast transmission of the image.

If you specify the Force parameter, the cmdlet disconnects any clients connected to the multicast transmission. If you do not specify the Force parameter, and the transmission is autocast, current clients finish receiving the content, but no additional clients can join the transmission.

-ThrottleLimit<Int32>

이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.

-TransmissionName<String>

Specifies a name for the multicast transmission.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsBootImage

예제

Example 1: Change boot image settings

This command changes the settings of the boot image named Fabrikam LOB setup (x86) for the x86 architecture. The command sets the display order of the boot image on the boot menu on PXE clients, and specifies a new name and description for the boot image.

PS C:\> Set-WdsBootImage -Architecture x86 -ImageName " Fabrikam LOB setup (x86)" -DisplayOrder 2 -NewImageName " Fabrikam LOB setup with re-partitioning (x86)" -NewDescription "Choose this image to re-partition the disk, and install Fabrikam LOB on computers with x86 processors."

Example 2: Start a multicast transmission of a boot image

This command starts a multicast transmission of the boot image named Fabrikam LOB setup (x86) for the x86 architecture. The command specifies that the multicast transmission is named Custom WinPE multicast.

PS C:\> Set-WdsBootImage -Architecture x86 -ImageName " Fabrikam LOB setup (x86)" -Multicast -TransmissionName "Custom WinPE multicast"

Example 3: Stop a multicast transmission of a boot image

This command stops a multicast transmission of the boot image named Fabrikam LOB setup (x86) for the x86 architecture. The Force parameter specifies that the cmdlet disconnects any clients connected to the multicast transmission.

PS C:\> Set-WdsBootImage -Architecture x86 -ImageName "Fabrikam LOB setup (x86)" -StopMulticastTransmission -Force

관련 항목

Get-WdsBootImage

Enable-WdsBootImage

Disable-WdsBootImage

Remove-WdsBootImage

Import-WdsBootImage

Export-WdsBootImage