Add-WdsDriverPackage
Add-WdsDriverPackage
Adds an existing driver package to a driver group or injects it into a boot image.
구문
Parameter Set: IdIntoBootImageProperties
Add-WdsDriverPackage -Architecture <Architecture> -Id <Guid> -ImageName <String> [-AsJob] [-CimSession <CimSession[]> ] [-FileName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: IdIntoDriverGroupName
Add-WdsDriverPackage -GroupName <String> -Id <Guid> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: NameIntoBootImageProperties
Add-WdsDriverPackage -Architecture <Architecture> -ImageName <String> -Name <String> [-AsJob] [-CimSession <CimSession[]> ] [-FileName <String> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
Parameter Set: NameIntoDriverGroupName
Add-WdsDriverPackage -GroupName <String> -Name <String> [-AsJob] [-CimSession <CimSession[]> ] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Add-WdsDriverPackage cmdlet adds an existing driver package to a driver group or injects a driver package into a boot image. Use the Import-WdsDriverPackage cmdlet to import driver packages into the Windows Deployment Services driver store. Specify a driver package by its unique name or ID.
To add a driver package to a driver group, specify the group name. Use the Remove-WdsDriverPackage to remove a drive package from a group.
To inject a driver package into a boot image, specify the image name and architecture. If the image name and architecture do not uniquely identify the boot image, specify the boot image file. After you inject a driver package into a boot image, Windows Deployment Services cannot remove the driver package.
매개 변수
-Architecture<Architecture>
Specifies an architecture. This is the architecture of the image. In order to inject a driver into a boot image, you must specify an architecture. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Arm
-- Ia64
-- X64
-- X86
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-FileName<String>
Specifies a file name. This is the file name of the boot image. Use this parameter to specify the file name for the boot image if the boot image name and architecture do not uniquely identify the image.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-GroupName<String>
Specifies the name of a driver group. The cmdlet adds the driver package to this group.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Id<Guid>
Specifies an ID. This is the ID of the driver package to add.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ImageName<String>
Specifies the name of an image. This is the name of the boot image. If this name is not unique, specify the file name of the boot image by using the FileName parameter.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies a name. This is the unique name of the driver package. If this name is not unique, specify the driver package ID, instead, by using the Id parameter.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsDriverPackage
예제
Example 1: Add a driver package to a group by using the package ID
This command adds a driver package to the group named Drivers for Frabrikam Devices. The command specifies the ID of the driver package.
PS C:\> Add-WdsDriverPackage -Id 32d78628-07fb-4e18-adc4-f0ecf8b41bbe -GroupName "Drivers for Fabrikam Devices"
Example 2: Add a driver package to a group by using the package name
This command adds a driver package to the group named Drivers for Frabrikam Devices. The command specifies Fabrikam Device Driver (x64) as the name of the driver package.
PS C:\> Add-WdsDriverPackage -GroupName "Drivers for Fabrikam Devices" -Name "Fabrikam Device Driver (x64)"
Example 3: Inject a driver package into a boot image by using the package ID
This command injects the driver package into the boot image named Contoso general setup (x64). The command specifies the ID of the driver package.
PS C:\> Add-WdsDriverPackage -Architecture X64 -Id 32d78628-07fb-4e18-adc4-f0ecf8b41bbe -ImageName "Contoso general setup (x64)"
Example 4: Inject a driver package into a boot image by using the package name
This command injects the driver package into the boot image named Contoso general setup (x64). The command specifies Fabrikam Device Driver (x64) as the name of the driver package.
PS C:\> Add-WdsDriverPackage -Architecture X64 -ImageName "Contoso general setup (x64)" -Name "Fabrikam Device Driver (x64)"