Import-WdsBootImage
Import-WdsBootImage
Imports a boot image to the image store.
구문
Parameter Set: AutoStart
Import-WdsBootImage -Multicast -Path <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-NewDescription <String> ] [-NewFileName <String> ] [-NewImageName <String> ] [-SkipVerify] [-ThrottleLimit <Int32> ] [-TransmissionName <String> ] [ <CommonParameters>]
Parameter Set: ImageFile
Import-WdsBootImage -Path <String> [-AsJob] [-CimSession <CimSession[]> ] [-DisplayOrder <UInt32> ] [-NewDescription <String> ] [-NewFileName <String> ] [-NewImageName <String> ] [-SkipVerify] [-ThrottleLimit <Int32> ] [ <CommonParameters>]
자세한 설명
The Import-WdsBootImage cmdlet imports a boot image from a Windows image file (.wim) to the Windows Deployment Services image store. You can assign the name, description, and file name of the image that you import. You can also enable a multicast transmission for the image.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DisplayOrder<UInt32>
Specifies the order in which images appear in the menu on Pre-Boot Execution Environment (PXE) clients. The menu lists the boot images in ascending order, smallest number to largest number.
If two boot images have the same display order, the imported images appear in alphabetical order of file name. If you do not specify this parameter, the imported images appear in the middle of the list.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Multicast
Indicates that the cmdlet enables an autocast transmission of the image. If you do not specify the TransmissionName parameter, Windows Deployment Services uses the image name of the imported image for the multicast.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewDescription<String>
Specifies a new description.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewFileName<String>
Specifies a new file name for the image file. Windows Deployment Services verifies that the source image file is unique before adding it to the image store.
If you do not specify this parameter, Windows Deployment Services uses the file name of the source image file for the imported image file.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-NewImageName<String>
Specifies a name for the image.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Path<String>
Specifies the fully qualified path of the file that contains the boot image. The path must accessible to the Windows Deployment Services server.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-SkipVerify
Indicates that Windows Deployment Services does not verify the source image file before adding it to the image store.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-TransmissionName<String>
Specifies a name for the multicast transmission. If you do not specify this parameter, Windows Deployment Services uses the image name of the imported image for the multicast.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.Management.Infrastructure.CimInstance#MSFT_WdsBootImage
예제
Example 1: Import a boot image
This command imports a boot image named boot.wim. The command specifies a new image name, description, and file name for the imported image. The command specifies that Windows Deployment Services does not verify the source image file before adding it to the image store.
PS C:\> Import-WdsBootImage -Path "E:\sources\boot.wim" -NewImageName "Fabrikam LOB setup (x86)" -NewDescription "Choose this image to install Fabrikam LOB on computers with x86 processors." -NewFileName "Fabrikamx86boot.wim" -SkipVerify
Example 2: Import a boot image and enable multicast
This command imports a boot image named winpe.wim. The command specifies the order in which boot images appear in the menu on PXE clients. The command enables a multicast transmission of the image and specifies the name for the multicast transmission.
PS C:\> Import-WdsBootImage -Path "D:\Images\BootImages\winpe.wim" -DisplayOrder 3 -Multicast -TransmissionName "Custom LOB multicast"