Set-DfsrConnectionSchedule
Set-DfsrConnectionSchedule
Changes the settings of a connection schedule between members of a replication group.
구문
Parameter Set: ScheduleNameParameterSet
Set-DfsrConnectionSchedule [[-GroupName] <String[]> ] [-SourceComputerName] <String> [-DestinationComputerName] <String> [[-UseUTC] <Boolean> ] [[-ScheduleType] <ConnectionScheduleType> {Always | Never | UseGroupSchedule} ] [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: CustomScheduleParameterSet
Set-DfsrConnectionSchedule [[-GroupName] <String[]> ] [-SourceComputerName] <String> [-DestinationComputerName] <String> [[-UseUTC] <Boolean> ] [-Day] <DayOfWeek[]> [-BandwidthDetail] <String> [[-DomainName] <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-DfsrConnectionSchedule cmdlet changes the schedule and bandwidth throttle of a connection between two members of a replication group.
DFS Replication connections are the logical partnerships between members in a replication group. The DFS Replication service uses the Remote Procedure Call (RPC) protocol to communicate between servers. By default, DFS Replication creates connections with the recommended schedule and bandwidth configuration: full bandwidth, and 24 hours a day, seven days a week availability.
매개 변수
-BandwidthDetail<String>
Specifies a custom schedule value string.
The schedule value defines the settings for each 15-minute interval block with its bandwidth, with 4 blocks to a set, where each set represents 1 hour. There are 24 sets. The time starts at 00:00 and ends at 24:00. The valid settings on a 15-minute block are 0 (zero) through F, using hexadecimal. The following shows the mapping of the valid settings:
0 = No replication
1 = 16 kilobits per second (Kbps)
2 = 64 Kbps
3 = 128 Kbps
4 = 256 Kbps
5 = 512 Kbps.
6 = 1 megabit per second (Mbps)
7 = 2 Mbps
8 = 4 Mbps
9 = 8 Mbps
A = 16 Mbps
B = 32 Mbps
C = 64 Mbps
D = 128 Mbps
E = 256 Mbps
F = Full bandwidth replication
A complete value string must include all 24 sets with 4 blocks to a set, for a total of 96 hexadecimal characters. For example: ffffffffffff0000ffff0000ffff00004444000044440000444400004444000044440000ffff0000ffff0000ffffffff
별칭 |
없음 |
필수 여부 |
true |
위치 |
6 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Day<DayOfWeek[]>
Specifies an array of days of the week. You can specify either an enumerated string value or its corresponding integer for this parameter. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Sunday (0)
-- Monday (1)
-- Tuesday (2)
-- Wednesday (3)
-- Thursday (4)
-- Friday (5)
-- Saturday (6)
별칭 |
없음 |
필수 여부 |
true |
위치 |
5 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DestinationComputerName<String>
Specifies the name of the receiving computer. A receiving computer is also called an inbound or downstream computer.
별칭 |
ReceivingMember,RMem |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DomainName<String>
Specifies the NetBIOS name or fully qualified domain name (FQDN) for the Active Directory Domain Service (AD DS) domain that contains the replication group. If you do not specify this parameter, the cmdlet uses the domain of the current user.
별칭 |
없음 |
필수 여부 |
false |
위치 |
101 |
기본값 |
[Current Domain] |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-GroupName<String[]>
Specifies an array of names of replication groups. You can use a comma separated list and the wildcard character (*).
별칭 |
RG,RgName |
필수 여부 |
false |
위치 |
1 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
true |
-ScheduleType<ConnectionScheduleType>
Specifies the type of connection schedule. You can specify the inherited replication group schedule, a connection-based closed schedule that allows no replication, or a connection-based full schedule that enables replication for 24 hours a day, seven days a week using full bandwidth. You can specify either an enumerated string value or its corresponding integer for this parameter. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- UseGroupSchedule (0)
-- Never (1)
-- Always (2)
별칭 |
없음 |
필수 여부 |
false |
위치 |
5 |
기본값 |
0 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-SourceComputerName<String>
Specifies the name of the sending computer. A sending computer is also called an outbound or upstream computer.
별칭 |
SendingMember,SMem |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-UseUTC<Boolean>
Indicates whether the destination computer uses Coordinated Universal Time (UTC) for the schedule. By default, the destination computer interprets the schedule in its own local time.
별칭 |
없음 |
필수 여부 |
false |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
- Microsoft.DistributedFileSystemReplication.DfsReplicationGroup, string
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
- Microsoft.DistributedFileSystemReplication.DfsrConnectionSchedule
예제
Example 1: Configure a full connection schedule
This command configures the connection schedule from the server named SRV01 to the server named SRV02 in the RG24 replication group. The ScheduleType parameter specifies a full schedule that enables replication 24 hours a day, seven days a week that uses full bandwidth.
PS C:\> Set-DfsrConnectionSchedule -GroupName "RG24" -SourceComputerName "SRV01" -DestinationComputerName "SRV02" -ScheduleType Always
Example 2: Set a connection schedule
This command configures the connection schedule from the server named SRV01 to the server named SRV02 in the RG24 replication group. The command specifies that the DFS Replication service prevents all replication from 9 A.M. to 5 P.M. Monday through Friday, and allows replicating in all other intervals at full bandwidth.
PS C:\> Set-DfsrConnectionSchedule -GroupName "RG24" -SourceComputerName "SRV01" -DestinationComputerName "SRV01" -Day Monday,Tuesday,Wednesday,Thursday,Friday - BandwidthDetail "ffffffffffffffffffffffffffffffffffff00000000000000000000000000000000ffffffffffffffffffffffffffff"