Import-IpamSubnet
Import-IpamSubnet
Imports IP address subnet objects from the specified file into the computer running IPAM.
구문
Parameter Set: Import
Import-IpamSubnet -AddressFamily <AddressFamily> -Path <String> [-AsJob] [-CimSession <CimSession[]> ] [-ErrorPath <String> ] [-Force] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Import-IpamSubnet cmdlet imports IP address subnet objects from the specified file into the computer that runs the IP Address Management (IPAM) server. The cmdlet logs objects that fail to import during the operation. Use this cmdlet to import both virtualized and non-virtualized subnets. The cmdlet adds new IP address subnet objects from the comma separated value .csv file into the computer that runs the IPAM server and edits the existing subnet objects with the updated information specified in the .csv file. The .csv file can contain both virtualized and non-virtualized subnets. If the file you import does not contain the columns NetworkType, ProviderAddressSpace and CustomerAddressSpace in the header, the cmdlet assumes all subnets are non-virtualized, and it adds them to the default address space. If the header contains these columns, then the cmdlet uses the network type to add the subnets to given provider or customer address space.
매개 변수
-AddressFamily<AddressFamily>
Specifies an address family of IP address range objects to import. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- IPv4
-- IPv6
You can specify only one address family at a time using this cmdlet and the records in the file should match the address family you specify with this parameter.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ErrorPath<String>
Specifies the fully qualified path, but not the name, of the error files that are created if one or more records fail to import. The IPAM server generates file names by prepending the string Error_ and appending the timestamp of the operation to the file name. The default value of this parameter is the %windir%\temp folder.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Path<String>
Specifies the fully qualified path and name of the file to import.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Import IPv4 subnets
This command imports the IPv4 subnets from the file Subnetsv4.csv into the computer that runs IPAM. The command adds the new subnets and modifies existing addresses. The command records any errors in the default folder, %windir%\temp for the user, in .csv file format.
PS C:\> Import-IpamSubnet -AddressFamily IPv4 -Path "C:\subnetsv4.csv" -Force
Example 2: Import IPv4 subnets and specify the error path
This command imports IPv4 subnets from the file Subnetsv4.csv into the computer that runs the IPAM server. The command adds new subnets and modifies existing subnets.
PS C:\> Import-IpamAddress -AddressFamily IPv4 -Path "C:\addressv4.csv" -ErrorPath "C:\" -Force