Add-IpamSubnet
Add-IpamSubnet
Adds a subnet to IPAM.
구문
Parameter Set: AddIpamSubnet0
Add-IpamSubnet [-Name] <String> [-NetworkId] <String> [-AddressSpace <String> ] [-AsJob] [-CimSession <CimSession[]> ] [-CustomConfiguration <String> ] [-Description <String> ] [-NetworkSite <String> ] [-NetworkType <VirtualizationType> ] [-Owner <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-VirtualSubnetId <UInt32> ] [-VlanId <UInt16[]> ] [-VmmLogicalNetwork <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-IpamSubnet cmdlet adds an IP subnet to an IP Address Management (IPAM) server. Use the cmdlet to add a NonVirtualized, Provider or Customer IP subnet in IPAM. If the network type of the subnet to add is Provider or NonVirtualized, the cmdlet will add it to the default address space, unless you specify an address space. If the network type of the range to add is Customer, you must specify an address space.
You can associate virtualized subnets, either provider or customer, with a logical network and a network site. These properties represent an abstraction of a physical network and are inherited by all ranges and addresses that map to this subnet.
매개 변수
-AddressSpace<String>
Specifies an address space to which this IP address subnet belongs. If you not specify an address space, the cmdlet retrieves data for all address spaces configured in IPAM.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
Default |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CustomConfiguration<String>
Specifies semicolon-separated name/value pairs. This parameter specifies custom metadata that is associated with the address space.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description of the subnet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Name<String>
Specifies a name for the subnet.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkId<String>
Specifies the network and the prefix for the given subnet. Specify the network ID in Classless Interdomain Routing (CIDR) notation in the format Network/Prefix.
별칭 |
없음 |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkSite<String>
Specifies a network site that is associated with a logical network and forms an abstraction of the physical network. A logical network can contain many network sites. This property is inherited by all ranges and addresses associated with the given subnet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkType<VirtualizationType>
Specifies an array of of network types for the addresses to add. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Provider
-- Customer
-- NonVirtualized
If the value of the AddressSpace parameter is Default, then this parameter can take the value Provider or NonVirtualized. If the value of the AddressSpace parameter is Provider, then the value of this parameter, if specified, must be Provider. Specifying any other value for this parameter will result in an error. Similarly, if the value of the AddressSpace parameter is Customer, then the value of this parameter, if specified, must be Customer. Specifying any other value for this parameter will result in an error.
If you do not specify this parameter, the network type defaults to NonVirtualized.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
NonVirtualized |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Owner<String>
Specifies the name of an owner for the subnet.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-VirtualSubnetId<UInt32>
Specifies a virtual subnet ID. When you use network virtualization, this property, along with Customer address and Provider address is used to route packets to a particular customer VM.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-VlanId<UInt16[]>
Specifies an array of unique identifiers for VLANs.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-VmmLogicalNetwork<String>
Specifies the abstraction of a physical network that describes a particular function in your environment such as backend or frontend.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
CimInstance#ROOT/microsoft/ipam/MSFT_IPAM_Subnet
Represents an IP Subnet in IPAM Server.
예제
Example 1: Add a subnet
This command adds an IPv4 subnet and associates it with VLANs.
PS C:\>Add-IpamSubnet -Name Contoso_2 -NetworkId 10.12.0.0/16 -VlanId 13,10 -PassThru
Example 2: Add a subnet to the default address space
This command adds an IPV4 subnet with network type provider to the default address space.
PS C:\> Add-IpamSubnet -Name Contoso_3 -NetworkId 10.13.0.0/16 -NetworkType Provider -VmmLogicalNetwork Storage -NetworkSite Site03 -VlanId 13,10 -PassThru
Example 3: Add a subnet for a customer network type
This command adds an IPv4 subnet with network type customer.
PS C:\> Add-IpamSubnet -Name Contoso_3 -NetworkId 10.13.0.0/16 -NetworkType Customer -AddressSpace NetCat -VmmLogicalNetwork Storage -NetworkSite Site03 -VirtualSubnetId 10 -PassThru
Example 4: Add a subnet and attach metadata
This command adds physical subnets and attaches AD Site metadata to the subnets.
PS C:\> Add-IpamSubnet -Name Contosov6_10 -NetworkId 2001:db8::ff00/120 -CustomConfiguration "Country=United States;ADSite=Site01" | Format-List Name, NetworkId, Overlapping, CustomConfiguration