Set-IpamBlock
Set-IpamBlock
Modifies an IP address block in IPAM.
구문
Parameter Set: ByKeySet
Set-IpamBlock [-NetworkId] <String[]> [-StartIPAddress] <IPAddress[]> [-EndIPAddress] <IPAddress[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-LastAssignedDate <DateTime> ] [-NewEndIpAddress <IPAddress> ] [-NewNetworkId <String> ] [-NewStartIpAddress <IPAddress> ] [-Owner <String> ] [-PassThru] [-Rir <String> ] [-RirReceivedDate <DateTime> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: InputObject (cdxml)
Set-IpamBlock -InputObject <CimInstance[]> [-AsJob] [-CimSession <CimSession[]> ] [-Description <String> ] [-LastAssignedDate <DateTime> ] [-NewEndIpAddress <IPAddress> ] [-NewNetworkId <String> ] [-NewStartIpAddress <IPAddress> ] [-Owner <String> ] [-PassThru] [-Rir <String> ] [-RirReceivedDate <DateTime> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-IpamBlock cmdlet modifies an IP address block in IP Address Management (IPAM). Specify an address block by using the StartIPAddress and EndIPAddress parameters, or use the InputObject parameter to specify the input to this cmdlet.
If you specify the NewStartIpAddress, NewEndIpAddress, or NewNetworkId parameters, the cmdlet resets the utilization trend information for the address block.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description for the address block.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EndIPAddress<IPAddress[]>
Specifies the end address of the IP address block. If you specify this parameter, you must specify the StartIPAddress parameter.
별칭 |
없음 |
필수 여부 |
true |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InputObject<CimInstance[]>
이 cmdlet에 대한 입력을 지정합니다. 이 매개 변수를 사용하거나 입력을 이 cmdlet으로 파이프할 수 있습니다.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByValue) |
와일드카드 문자 허용 여부 |
false |
-LastAssignedDate<DateTime>
Specifies the last date, as a DateTime object, on which the block was assigned to devices on a network. To obtain a DateTime object, use the Get-Date cmdlet. For more information, type Get-Help Get-Date
.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkId<String[]>
Specifies the IP network prefix, in Classless Interdomain Routing (CIDR) notation, for the network block that you want modified.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NewEndIpAddress<IPAddress>
Specifies a new value for the end IP address of the address block. Specify a value that is compatible with the values that you specify for the NewNetworkId and NewStartIPAddress parameters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NewNetworkId<String>
Specifies an IP network prefix, in Classless Interdomain Routing (CIDR) notation. This is the new value for the network from which the IP address block is added to IPAM.
Specify a value that is compatible with the values that you specify for the NewStartIPAddress and NewEndIpAddress parameters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NewStartIpAddress<IPAddress>
Specifies a new value for the start IP address of the address block. Specify a value that is compatible with the values that you specify for the NewNetworkId and NewEndIPAddress parameters.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Owner<String>
Specifies the owner of the IP address block.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Rir<String>
Specifies the regional internet registry (RIR) for public addresses. RIR is a built-in custom field in the IPAM server that contains the following built-in values:
-- AFRINIC
-- APNIC
-- ARIN
-- LACNIC
-- RIPE
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-RirReceivedDate<DateTime>
Specifies the date, as a DateTime object, when you obtained the public address block from the RIR.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-StartIPAddress<IPAddress[]>
Specifies the start address for the IP address block. If you specify this parameter, you must specify the EndIPAddress parameter.
별칭 |
없음 |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
IpamBlock
Represents an address block object in IPAM.
예제
Example 1: Modify the description child IP address ranges
This example modifies the description of all child IP address ranges that belongs to an address block.
The first command gets an IpamBlock object that contains the IP address block from the network that has the ID 10.0.0.0/8. The command stores the IpamBlock object in the $Parent variable.
The second command gets all the child IP address ranges for the address block stored in the $Parent variable. The command passes the child IP address ranges to the Set-IpamBlock cmdlet by using the pipeline operator. The command modifies the description for the child IP address ranges.
PS C:\> $Parent = Get-IpamBlock -NetworkId "10.0.0.0/8" -StartIPAddress 10.0.0.0 -EndIPAddress 10.255.255.255PS C:\>Get-IpamBlock -MappingToParentBlock $Parent | Set-IpamBlock -Description "IP Blocks assigned to Site01" -PassThru
Example 2: Modify key properties of an address block
This command uses the Get-IpamBlock to gets the IP address block from the network that has the ID 10.11.0.0/16. The command specifies the start and end address of the address block. The command passes the address block to the Set-IpamBlock cmdlet by using the pipeline operator. The Set-IpamBlock cmdlet specifies new values for the network ID, start address and end address for the address block. Because the command modifies the network ID, start address, and end address of the address block, the command resets the utilization trend of the address block.
PS C:\> Get-IpamBlock -NetworkId "10.11.0.0/16" -StartIPAddress 10.11.0.0 -EndIPAddress 10.11.255.255 | Set-IpamBlock -NewNetworkId 10.13.0.0/16 -NewStartIPAddress 10.13.0.0 -NewEndIpAddress 10.13.255.255