Add-IpamRange
Add-IpamRange
Adds an IP address range to the configuration of an IPAM server.
구문
Parameter Set: AddRange0
Add-IpamRange [-NetworkId] <String> [[-StartIPAddress] <IPAddress> ] [[-EndIPAddress] <IPAddress> ] [-AddressSpace <String> ] [-AsJob] [-AssignmentDate <DateTime> ] [-AssignmentType <AddressAssignment> ] [-CimSession <CimSession[]> ] [-ConnectionSpecificDnsSuffix <String> ] [-CreateSubnetIfNotFound] [-CustomConfiguration <String> ] [-Description <String> ] [-DnsServer <IPAddress[]> ] [-DnsSuffix <String[]> ] [-Gateway <String[]> ] [-ManagedByService <String> ] [-NetworkType <VirtualizationType> ] [-Owner <String> ] [-PassThru] [-ReservedAddress <String[]> ] [-ServiceInstance <String> ] [-ThrottleLimit <Int32> ] [-UtilizationCalculation <UtilizationCalculation> ] [-UtilizedAddresses <Double> ] [-VIP <String[]> ] [-WinsServer <IPAddress[]> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Add-IpamRange cmdlet adds an IP address range to the configuration of an IP Address Management (IPAM) server. Use this cmdlet to add a Non-Virtualized, Provider, or a Customer IP address range in IPAM. If the network type is Provider or NonVirtualized, the range will be added to default address space if you do not specify an address space. If the network type is Customer, you must specify an address space.
매개 변수
-AddressSpace<String>
Specifies an address space to which this IP address range belongs. An address space contains IP subnets, IP ranges, and IP addresses. If you do not specify this parameter, the default address space is assumed. The default address space is the Provider address space.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
Default |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-AssignmentDate<DateTime>
Specifies a date on which to assign addresses in this range.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-AssignmentType<AddressAssignment>
Specifies how IPAM assigns the addresses. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Static
-- Dynamic
-- Auto
-- VIP
-- Reserved
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
Static |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ConnectionSpecificDnsSuffix<String>
Specifies the connection-specific DNS suffix to associate with this range.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-CreateSubnetIfNotFound
Indicates that the cmdlet creates a parent subnet for this range of addresses. If you specify this parameter, the cmdlet automatically creates a parent subnet for this range, if no parent subnet exists.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CustomConfiguration<String>
Specifies semicolon-separated name/value pairs. This parameter specifies custom metadata that is associated with the address space.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Description<String>
Specifies a description for the range.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DnsServer<IPAddress[]>
Specifies an array of DNS servers to associate with this range. Specify the names of the DNS servers in the order of preference, highest to lowest.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-DnsSuffix<String[]>
Specifies an array of search suffixes to associate with the given range.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-EndIPAddress<IPAddress>
Specifies an IP address. For this parameter, the address represents the high end of the range to add.
별칭 |
없음 |
필수 여부 |
false |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Gateway<String[]>
Specifies an array of gateway servers, imported from a DHCP Scope, to associate with a range in IPAM. Specify the names of the gateway servers in the order of preference, highest to lowest. The format for specification is <ipaddress>\<metric>. To specify the Automatic metric, use the format <Ipaddress>\Automatic.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ManagedByService<String>
Specifies the value of the managing service of the IP address ranges being added.
별칭 |
MB |
필수 여부 |
false |
위치 |
named |
기본값 |
IPAM |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkId<String>
Specifies the network and the prefix for the given range. Specify the network ID in Classless Interdomain Routing (CIDR) notation in the format Network/Prefix.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-NetworkType<VirtualizationType>
Specifies an array of network types for the addresses to be added. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- Provider
-- Customer
-- NonVirtualized
If the value of the AddressSpace parameter is Default, then this parameter can take the value Provider or NonVirtualized. If the value of the AddressSpace parameter is Provider, then the value of this parameter, if specified, must be Provider. Specifying any other value for this parameter will result in an error. Similarly, if the value of the AddressSpace parameter is Customer, then the value of this parameter, if specified, must be Customer. Specifying any other value for this parameter will result in an error.
If you do not specify this parameter, network type defaults to NonVirtualized.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
NonVirtualized |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Owner<String>
Specifies the name of an owner for an address range.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ReservedAddress<String[]>
Specifies the reserved addresses in the range. Specify the reserved addresses as a list, in descending order of precedence.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ServiceInstance<String>
Specifies the service instance that manages the address ranges to add. The value specified for this field should be present in the set of values defined for the ServiceInstance custom field in IPAM. The cmdlet will report an error if this is not found to be a valid value for the ServiceInstance custom field. The user can edit the associated custom field to add or delete values.
별칭 |
SI |
필수 여부 |
false |
위치 |
named |
기본값 |
Localhost |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-StartIPAddress<IPAddress>
Specifies an IP address. For this parameter, the address represents the low end of the range to add.
별칭 |
없음 |
필수 여부 |
false |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-UtilizationCalculation<UtilizationCalculation>
Specifies the utilization information type that will be automatically calculated by IPAM or specified by the user.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
Automatic |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-UtilizedAddresses<Double>
Specifies the number of addresses to utilize from the pool of IP addresses.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-VIP<String[]>
Specifies an array of virtual IP addresses that are usually set aside for load balancers. Specify the VIPs as a list, in descending order of precedence.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-WinsServer<IPAddress[]>
Specifies an array of Windows Internet Name Service (WINS) servers to associate with this range. Specify the WINS servers in decreasing order of precedence.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
True (ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
CimInstance#ROOT/microsoft/ipam/MSFT_IPAM_Range
IP address range object added to IPAM data store.
예제
Example 1: Add an IP address range
This command adds an IP address range that is managed by the current instance of IPAM server. This range is added to the default address space.
PS C:\> Add-IpamRange -NetworkId 10.13.0.0/16 -PassThru
Example 2: Add an IP address range by using a network ID
This command adds an IP address range with network id 172.16.10.0/24. IPAM does not allow creation of a range for which a corresponding subnet does not exist.
PS C:\> Add-IpamRange -NetworkId 172.16.10.0/24
Example 3: Add an IP address range by using a network ID and create a subnet
This command adds an IP address range with network id 172.16.10.0/24. The command uses the CreateSubnetIfNotFound to automatically create the corresponding subnet, and adds WINS and Gateway servers to the range. Gateway servers are specified in the format <IP Address>/<Metric>.
PS C:\> Add-IpamRange -NetworkId 172.16.10.0/24 -CreateSubnetIfNotFound -WinsServer 10.10.1.1, 10.10.1.2 -Gateway "10.10.5.1/Automatic","10.10.5.2/4"|Format-List Overlapping, NetworkID, StartAddress,EndAddress, ManagedByService, ServiceInstance, WinsServers, Gateway
Example 4: Add a provider IP address range to an existing IPAM configuration
This command adds a provider IP address range that is managed by current instance of IPAM. The range will be added to default address space.
PS C:\> Add-IpamRange -NetworkId 172.16.19.0/24 -StartIPAddress 172.16.19.10 -EndIPAddress 172.16.19.110 -NetworkType Provider -CreateSubnetIfNotFound -PassThru
Example 5: Add a range of provider IP addresses
This command adds a provider IP range 172.16.19.0/24 with start and end IP addresses 172.16.19.10 and 172.16.19.110. The command adds the range to a provider address space named ContosoDataCenter. Since this range is in a different address space, IPAM will not mark it as overlapping.
PS C:\> Add-IpamRange -NetworkId 172.16.19.0/24 -StartIPAddress 172.16.19.10 -EndIPAddress 172.16.19.110 -NetworkType Provider -AddressSpace ContosoDataCenter -PassThru -CreateSubnetIfNotFound