Set-IpamDatabase
Set-IpamDatabase
Modifies settings that IPAM uses to connect to the IPAM database.
구문
Parameter Set: SetDatabaseConfig0
Set-IpamDatabase [-DatabaseServer] <String> [-DatabaseName] <String> [-DatabasePort] <UInt16> -DatabaseAuthType <AuthType> [-AsJob] [-CimSession <CimSession[]> ] [-DatabaseCredential <PSCredential> ] [-Force] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
자세한 설명
The Set-IpamDatabase cmdlet modifies settings that IP Address Management (IPAM) uses to connect to the IPAM database hosted on a computer that runs Microsoft SQL Server.
Verify that you can reach the database server from the IPAM server. Specify whether to connect to the destination server by using the account for the computer that hosts the IPAM server or by using a SQL Server database account. If you specify the IPAM server account, verify that account has necessary permissions.
Use the Get-IpamDatabase cmdlet to view database configuration settings.
You can specify any port to connect to the database server. We recommend you use the default port, 1433, to connect to Microsoft SQL Server.
매개 변수
-AsJob
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DatabaseAuthType<AuthType>
Specifies which type of authentication to use to connect to the computer that runs SQL Server. 이 매개 변수에 허용되는 값은 다음과 같습니다.
-- SQL. Use the database account. Specify this credential by using the DatabaseCredential parameter.
-- Windows. Use the account for the computer that runs the IPAM server.
별칭 |
없음 |
필수 여부 |
true |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DatabaseCredential<PSCredential>
Specifies credentials, as a PSCredential object, for the computer that runs SQL Server. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential
.
Specify this parameter if you specified a value of SQL for the DatabaseAuthType parameter.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DatabaseName<String>
Specifies the name of a SQL Server database. The IPAM server connects to this database.
별칭 |
없음 |
필수 여부 |
true |
위치 |
3 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DatabasePort<UInt16>
Specifies the port that the IPAM server uses to connect to the database server.
별칭 |
없음 |
필수 여부 |
true |
위치 |
4 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DatabaseServer<String>
Specifies the fully qualified domain name (FQDN) or IP address of the database server. The IPAM server connects to this server.
별칭 |
없음 |
필수 여부 |
true |
위치 |
2 |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Force
사용자 확인을 요구하지 않고 명령을 실행합니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-PassThru
작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
없음 |
필수 여부 |
false |
위치 |
named |
기본값 |
없음 |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
IpamDatabase
Represents the datastore for an IPAM server.
예제
Example 1: Connect to an external database
This example configures the IPAM server to connect to an external database. The cmdlet does not move any data from the existing WID database or create the new database. Configure all access settings manually on the database server. The example uses Windows as the database authentication type.
The first command command uses the Get-IpamDatabase cmdlet to display the configuration settings of the database.
PS C:\> Get-IpamDatabase
The second command sets the database configuration. The command includes the database name and database server name. The cmdlet prompts you before it continues.
PS C:\> Set-IpamDatabase -DatabaseServer "ContosoDB04" -DatabaseName "IpamData01" -DatabasePort 1433 -DatabaseAuthType Windows
The last command repeats the first command, displaying the revised configuration information.
PS C:\> Get-IpamDatabase