Set-DtcNetworkSetting
Set-DtcNetworkSetting
Modifies DTC network and security configuration for a DTC instance.
구문
Parameter Set: DisableNetwork
Set-DtcNetworkSetting -DisableNetworkAccess [-CimSession <CimSession[]> ] [-DtcName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
Parameter Set: NetworkSettings
Set-DtcNetworkSetting [-AuthenticationLevel <String> {NoAuth | Incoming | Mutual} ] [-CimSession <CimSession[]> ] [-DtcName <String> ] [-InboundTransactionsEnabled <Boolean> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-LUTransactionsEnabled <Boolean> ] [-OutboundTransactionsEnabled <Boolean> ] [-RemoteAdministrationAccessEnabled <Boolean> ] [-RemoteClientAccessEnabled <Boolean> ] [-ThrottleLimit <Int32> ] [-XATransactionsEnabled <Boolean> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Set-DtcNetworkSetting cmdlet modifies the Distributed Transaction Coordinator (DTC) network and security configuration for the DTC instance specified by the DtcName parameter. This cmdlet also restarts the DTC instance.
매개 변수
-AuthenticationLevel<String>
Sets the network authentication level of the DTC instance to NoAuth, Incoming, or Mutual.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DisableNetworkAccess
Specifies whether to disable network access for the DTC instance.
별칭 |
none |
필수 여부 |
true |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DtcName<String>
Specifies a DTC instance. If you do not specify this parameter, or if you specify a value of Local, this cmdlet modifies the local DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InboundTransactionsEnabled<Boolean>
Indicates whether to enable inbound transactions to the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-LUTransactionsEnabled<Boolean>
Indicates whether to enable LU transactions in the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-OutboundTransactionsEnabled<Boolean>
Indicates whether to enable outbound transactions from the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RemoteAdministrationAccessEnabled<Boolean>
Indicates whether to enable remote administration access for the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-RemoteClientAccessEnabled<Boolean>
Indicates whether to enable remote client access for the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-XATransactionsEnabled<Boolean>
Indicates whether to enable XA transactions in the DTC instance.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
<WorkflowParameters>
이 cmdlet은 다음 워크플로 일반 매개 변수 -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName, –InputObject를 지원합니다. 자세한 내용은 다음을 참조하세요. about_WorkflowCommonParameters.
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Modify network and security settings
The first command modifies the DTC network and security settings for the local DTC instance. The second command verifies the changes.
PS C:\> Set-DtcNetworkSetting -DtcName "Local" -AuthenticationLevel "Incoming" -InboundTransactionsEnabled $False
PS C:\> Get-DtcNetworkSetting -DtcName "Local"