Set-DtcLog
Set-DtcLog
Modifies the log file settings of a DTC instance.
구문
Parameter Set: Set2
Set-DtcLog [-CimSession <CimSession[]> ] [-DtcName <String> ] [-InformationAction <System.Management.Automation.ActionPreference> {SilentlyContinue | Stop | Continue | Inquire | Ignore | Suspend} ] [-InformationVariable <System.String> ] [-MaxSizeInMB <UInt32> ] [-Path <String> ] [-SizeInMB <UInt32> ] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>] [ <WorkflowParameters>]
자세한 설명
The Set-DtcLog cmdlet modifies the log file settings of a Distributed Transaction Coordinator (DTC) instance. Use the DtcName parameter to specify a DTC instance. This cmdlet also recreates the transactions log with new settings and restarts the DTC instance.
매개 변수
-CimSession<CimSession[]>
원격 세션에서 또는 원격 컴퓨터에서 cmdlet을 실행합니다. New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 컴퓨터 이름이나 세션 개체를 입력합니다. 기본값은 로컬 컴퓨터의 현재 세션입니다.
별칭 |
Session |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-DtcName<String>
Specifies a DTC instance. The cmdlet modifies the log file for this instance. If you do not specify this parameter, or if you specify a value of Local, this cmdlet modifies the log file for the local DTC instance.
별칭 |
n |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-InformationAction<System.Management.Automation.ActionPreference>
별칭 |
infa |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-InformationVariable<System.String>
별칭 |
iv |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-MaxSizeInMB<UInt32>
Specifies the maximum file size of the new log file in MB.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Path<String>
Specifies the physical or network path to store the new log file. If a log file already exists in the specified path it is overwritten.
별칭 |
p |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-SizeInMB<UInt32>
Specifies the initial file allocation size of the new log file in megabytes.
별칭 |
s |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
True (ByValue, ByPropertyName) |
와일드카드 문자 허용 여부 |
false |
-ThrottleLimit<Int32>
이 cmdlet을 실행하도록 설정할 수 있는 최대 동시 작업 수를 지정합니다. 이 매개 변수가 생략되거나 값 0
이 입력되면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 제한 한도를 계산합니다. 제한 한도는 현재 cmdlet에만 적용되며 세션이나 컴퓨터에는 적용되지 않습니다.
별칭 |
none |
필수 여부 |
false |
위치 |
named |
기본값 |
none |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-Confirm
cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
-WhatIf
cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.
필수 여부 |
false |
위치 |
named |
기본값 |
false |
파이프라인 입력 적용 여부 |
false |
와일드카드 문자 허용 여부 |
false |
<CommonParameters>
이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).
<WorkflowParameters>
이 cmdlet은 다음 워크플로 일반 매개 변수 -PSParameterCollection, -PSComputerName, -PSCredential, -PSConnectionRetryCount, -PSConnectionRetryIntervalSec, -PSRunningTimeoutSec, -PSElapsedTimeoutSec, -PSPersist, -PSAuthentication, -PSAuthenticationLevel, -PSApplicationName, -PSPort, -PSUseSSL, -PSConfigurationName, -PSConnectionURI, -PSAllowRedirection, -PSSessionOption, -PSCertificateThumbprint, -PSPrivateMetadata, -AsJob, -JobName, –InputObject를 지원합니다. 자세한 내용은 다음을 참조하세요. about_WorkflowCommonParameters.
입력
입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.
출력
출력 유형은 cmdlet이 내보내는 개체의 유형입니다.
예제
Example 1: Set the log file path and file size
The first command sets the path for the DTC log file and specifies the file size. The second command confirms the change.
PS C:\> Set-DtcLog -Path "C:\Windows\system32\MSDtc\NewLog\" -SizeInMB 32 -MaxSizeInMB 1024
PS C:\> Get-DtcLog