Set-VmNetworkAdapterIsolation

Set-VmNetworkAdapterIsolation

Modifies isolation settings for a virtual network adapter.

구문

Parameter Set: VMName
Set-VmNetworkAdapterIsolation [-VMName] <String[]> [-AllowUntaggedTraffic <Boolean> ] [-ComputerName <String[]> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ManagementOS
Set-VmNetworkAdapterIsolation -ManagementOS [-AllowUntaggedTraffic <Boolean> ] [-ComputerName <String[]> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: ResourceObject
Set-VmNetworkAdapterIsolation [-VMNetworkAdapter] <VMNetworkAdapterBase[]> [-AllowUntaggedTraffic <Boolean> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-Confirm] [-WhatIf] [ <CommonParameters>]

Parameter Set: VMObject
Set-VmNetworkAdapterIsolation [-VM] <VirtualMachine[]> [-AllowUntaggedTraffic <Boolean> ] [-DefaultIsolationID <Int32> ] [-IsolationMode <VMNetworkAdapterIsolationMode> ] [-MultiTenantStack <OnOffState> ] [-Passthru] [-VMNetworkAdapterName <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]

자세한 설명

The Set-VmNetworkAdapterIsolation cmdlet modifies isolation settings for a virtual network adapter. You can isolate a virtual machine adapter by using virtual local area network (VLAN), Hyper-V Network Virtualization or a third party virtualization solution. You can specify the isolation method and modify other settings, which include multitenancy settings. For more information about multitenancy, see the Add-VmNetworkAdapterRoutingDomainMapping cmdlet.

매개 변수

-AllowUntaggedTraffic<Boolean>

Indicates whether the virtual machine sends and receives untagged traffic.

-ComputerName<String[]>

Specifies an array of Hyper-V hosts. The cmdlet modifies isolation settings for virtual machines hosted by the computers that you specify.

-DefaultIsolationID<Int32>

Specifies the ID of the network for traffic to the default compartment on virtual machines that have multitenancy enabled.

-IsolationMode<VMNetworkAdapterIsolationMode>

Specifies the isolation mode for the adapter. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- NativeVirtualSubnet. Hyper-V Network Virtualization.
-- ExternalVirtualSubnet. A third party network virtualization solution.
-- VLAN.
-- None.

If you specify a value of None, the network adapter uses its default isolation mode. Set the default isolation mode by using the Set-VMNetworkAdapterVlan cmdlet or the Set-VMNetworkAdapter cmdlet.

-ManagementOS

Indicates that the cmdlet operates on the parent or host operating system. If you specify this parameter, this cmdlet modifies isolation settings for the parent or host operating system.

-MultiTenantStack<OnOffState>

Specifies whether to use multiple isolation IDs for the virtual machine. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- On. Indicate isolation IDs so that the virtual machine provides services to multiple tenants on different isolation subnets.
-- Off. Do not indicate isolation IDs to virtual machine.

-Passthru

작업하고 있는 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-VM<VirtualMachine[]>

Specifies an array of virtual machine objects. The cmdlet modifies isolation settings for adapters that belong to the virtual machines that you specify. To obtain a virtual machine object, use the Get-VM cmdlet.

-VMName<String[]>

Specifies an array of names of virtual machines. The cmdlet modifies isolation settings for adapters that belong to the virtual machines that you specify.

-VMNetworkAdapter<VMNetworkAdapterBase[]>

Specifies an array VM network adapters as VMNetworkAdapterBase objects. The cmdlet modifies isolation settings for the adapters that you specify. To obtain a network adapter, use the Get-VMNetworkAdapter cmdlet.

-VMNetworkAdapterName<String>

Specifies the name of a virtual network adapter. The cmdlet modifies isolation settings for the adapters that you specify.

-Confirm

cmdlet을 실행하기 전에 확인 메시지가 표시됩니다.

-WhatIf

cmdlet이 실행될 경우 결과 동작을 표시합니다. cmdlet이 실행되지 않습니다.

<CommonParameters>

이 cmdlet은 일반 매개 변수 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer 및 -OutVariable을 지원합니다. 자세한 내용은 다음을 참조하세요. about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216).

입력

입력 유형은 cmdlet에 파이프할 수 있는 개체의 유형입니다.

• None

출력

출력 유형은 cmdlet이 내보내는 개체의 유형입니다.

• Microsoft.HyperV.PowerShell.VMNetworkAdapterIsolation

예제

Example 1: Set isolation mode for a virtual machine

This command sets the isolation mode of the virtual machine named TSQA01 to NativeVirtualSubnet, which indicates Hyper-V Network Virtualization. The virtual machine does not accept untagged traffic, but the MultitenantStack parameter has a value of On, so the virtual machine can provide services to multiple tenants.

PS C:\> Set-VMNetworkAdapterIsolation -VMName "TSQA01" -AllowUntaggedTraffic $False -IsolationMode NativeVirtualSubnet -MultiTenantStack On

Example 2: Set isolation mode and untagged traffic setting for a virtual machine

This command sets the isolation mode for virtual machine named TSQA01 to be VLAN. The virtual machine accepts untagged traffic, which is sent and received on VLAN 1, specified by the DefaultIsolationID parameter. Untagged traffic goes to the default compartment in the virtual machine. Multitenancy is enabled, therefore, the virtual machine receives isolation subnet and routing domain information.

PS C:\> Set-VMNetworkAdapterIsolation -VMName "TSQA01" -AllowUntaggedTraffic $True -IsolationMode VLAN -DefaultIsolationID 1 -MultiTenantStack On

관련 항목

Get-VmNetworkAdapterIsolation

Get-VM

Get-VMNetworkAdapter

Set-VMNetworkAdapter

Set-VMNetworkAdapterVlan