Set-PcsvDeviceUserPassword

업데이트 날짜: 2015년 2월

적용 대상: Windows 10 Technical Preview, Windows Server Technical Preview

Set-PcsvDeviceUserPassword

Changes the password of a user on a PCSV device.

구문

Parameter Set: ByComputerName
Set-PcsvDeviceUserPassword [-TargetAddress] <String> [-Credential] <PSCredential> [-ManagementProtocol] <ManagementProtocol> {WSMan | IPMI} [[-Port] <UInt16> ] [-Authentication <Authentication> {Default | Basic | Digest} ] [-CimSession <CimSession[]> ] [-PassThru] [-SkipCACheck] [-SkipCNCheck] [-SkipRevocationCheck] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-UseSSL] [-CurrentCredential] <PSCredential> [-NewPassword] <SecureString> [ <CommonParameters>]

Parameter Set: ByNoConnectionParams
Set-PcsvDeviceUserPassword [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [-TimeoutSec <UInt32> ] [-CurrentCredential] <PSCredential> [-NewPassword] <SecureString> [ <CommonParameters>]

Parameter Set: InputObject (cdxml)
Set-PcsvDeviceUserPassword -CurrentCredential <PSCredential> -NewPassword <SecureString> [-CimSession <CimSession[]> ] [-PassThru] [-ThrottleLimit <Int32> ] [ <CommonParameters>]

자세한 설명

The Set-PcsvDeviceUserPassword cmdlet changes the password of an existing user on a Physical Computer System View (PCSV) device. To change a password, provide the correct user name and password for the credential. The password length cannot exceed 20 characters. This cmdlet currently supports devices that use the Intelligent Platform Management Interface (IPMI) protocol. You can use this cmdlet for in-band connections only. To use this cmdlet with an in-band connection, you must have elevated privileges.

매개 변수

-Authentication<Authentication>

Specifies an authentication method to use for devices managed by WS-Management. Do not specify this parameter for devices managed by using IPMI. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- Basic
-- Digest
-- Default

-CimSession<CimSession[]>

원격 세션이나 원격 컴퓨터에서 cmdlet을 실행합니다. 컴퓨터 이름이나 New-CimSession 또는 Get-CimSession cmdlet의 출력과 같은 세션 개체를 입력하세요. 기본값은 로컬 컴퓨터 상의 현재 세션입니다.

-Credential<PSCredential>

Specifies a PSCredential object based on a user name and password. To obtain a PSCredential object, use the Get-Credential cmdlet. For more information, type Get-Help Get-Credential. For IPMI devices, specify credentials that correspond to a user with Administrator privileges on the device.

-CurrentCredential<PSCredential>

Specifies a PSCredential object based on the current user name and password.

-ManagementProtocol<ManagementProtocol>

Specifies a management protocol used to communicate with a device. 이 매개 변수에 허용되는 값은 다음과 같습니다.

-- WSMAN
-- IPMI

This cmdlet currently supports only devices that use the IPMI protocol.

-NewPassword<SecureString>

Specifies the new password, as a secure string, for the user that the CurrentCredential parameter specifies. To obtain a secure string, use the ConvertTo-SecureString cmdlet. For more information, type Get-Help ConvertTo-SecureString.

-PassThru

작업 중인 항목을 나타내는 개체를 반환합니다. 기본적으로 이 cmdlet은 출력을 생성하지 않습니다.

-Port<UInt16>

Specifies a port on the remote computer to use for the management connection. If you do not specify a port, the cmdlet uses the following default ports:

-- IPMI and WSMAN over HTTP. Port 623.
-- WSMAN over HTTPS. Port 664.

-SkipCACheck

Indicates that the client connects by using HTTPS without validating that a trusted certification authority (CA) signed the server certificate. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Do not specify this parameter unless you can establish trust in another way, such as if the remote computer is part of a network that is physically secure and isolated, or if the remote computer is a trusted host in a Windows Remote Management (WinRM) configuration.

-SkipCNCheck

Indicates that the certificate common name (CN) of the server does not need to match the host name of the server. Do not specify this parameter if you specify a value of IPMI for the ManagmentProtocol parameter.

Specify this parameter only for managing devices by using WSMAN over HTTPS. Be sure to specify this parameter only for trusted computers.

-SkipRevocationCheck

Indicates that the cmdlet skips the revocation check of server certificates.

Be sure to specify this parameter only for trusted computers.

-TargetAddress<String>

Specifies the name or IP address of the remote hardware device.

-ThrottleLimit<Int32>

Cmdlet을 실행하도록 설정할 수 있는 동시 작업의 최대 수를 지정합니다. 이 매개 변수를 생략하거나 값으로 0 을 입력하면 Windows PowerShell®은 컴퓨터에서 실행 중인 CIM cmdlet의 수에 따라 cmdlet에 대한 최적의 스로틀 제한을 계산합니다. 스로틀 제한은 현재 cmdlet에만 적용되고, 세션이나 컴퓨터에는 적용되지 않습니다.

-TimeoutSec<UInt32>

Specifies how long to wait, in seconds, for a response from the remote hardware device. After this period, the cmdlet abandons the connection attempt.

-UseSSL

Indicates that the server connects to the target computer by using SSL. WSMAN encrypts all content transmitted over the network. Specify this parameter to use the additional protection of HTTPS instead of HTTP. If you specify this parameter and SSL is not available on the connection port, the command fails.

<CommonParameters>

이 cmdlet은 -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, -OutVariable 등의 일반 매개 변수를 지원합니다. 자세한 내용은 TechNet의 about_CommonParameters(https://go.microsoft.com/fwlink/p/?LinkID=113216)

입력

입력 형식은 cmdlet으로 파이프할 수 있는 개체의 형식입니다.

출력

출력 형식은 cmdlet 실행 시 출력되는 개체의 형식입니다.

• Microsoft.Management.Infrastructure.CimInstance, Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/HardwareManagement/MSFT_PCSVDevice

  This cmdlet returns a PCSV device object, if you specify the PassThru parameter.

예

Example 1: Change a password

The first command uses the New-Object cmdlet to create an instance of the credential for the user account DavidChew. The command stores that instance in the $CurrentCredential variable. The command uses the ConvertTo-SecureString cmdlet to convert the current password to a secure string. For more information, type Get-Help New-Object and Get-Help ConvertTo-SecureString.

The second command converts a new password to a secure string, and then stores that password in the $NewPassword variable.

The third command changes the password for the user DavidChew. It specifies the current credential stored in $CurrentCredential and the new password for the user as a secure string.

PS C:\> $CurrentCredential = New-Object -TypeName "System.Management.Automation.PSCredential" -ArgumentList "DavidChew", (ConvertTo-SecureString -String "CurrentPassword" -AsPlainText -Force)
PS C:\> $NewPassword = ConvertTo-SecureString -String "NewPassword" -AsPlainText -Force
PS C:\> Set-PcsvDeviceUserPassword -CurrentCredential $CurrentCredential -NewPassword $NewPassword

관련 항목

Get-PcsvDevice