Create your Edge topology for Skype for Business Server 2015

Skype for Business Server 2015
 

마지막으로 수정된 항목: 2015-08-17

Summary: Learn how to build, publish, and export your 에지 서버 topology in 비즈니스용 Skype 서버 2015.

Topology Builder is the tool you need to use to build your 에지 서버 topology, just as it’s used for any topology component for 비즈니스용 Skype 서버 2015. Before following the steps below, you will need to have set up at least one 프런트 엔드 풀 or a Standard Edition 서버.

We cover the following topics in this article:

  • Build your 에지 서버 topology

  • Publish your 에지 서버 topology

  • Export your 에지 서버 topology

note참고:
To follow the steps below, you're going to need to log into the domain servers mentioned below as a user who's a member of the following domain groups:
  • RTCUniversalServerAdmins

  • Domain Admins

The first deployment step is building your 비즈니스용 Skype 서버 2015 에지 서버 topology, which consists of one of three options:

  • A single 에지 서버

  • A DNS load balanced 에지 풀 (one or more servers)

  • A hardware load balanced 에지 풀 (one or more servers)

If you aren't sure what you need, then before you start following these steps, it's a good time to go over the Planning documentation. Otherwise, let's begin.

  1. Log onto your 비즈니스용 Skype 서버 2015 Standard Edition 서버, or a 비즈니스용 Skype 서버 2015 프런트 엔드 풀.

  2. Once there, open 비즈니스용 Skype 서버 2015 토폴로지 작성기.

  3. In the console tree, expand the site you're going to deploy the 에지 서버 to.

  4. Right-click 에지 풀, and then click New 에지 풀.

  5. You'll click Next on the Define New 에지 풀 screen.

  6. On the Define the 에지 풀 FQDN screen, type the internal fully qualified domain name (FQDN) that the 에지 서버 is going to use, and select Single computer pool, clicking Next when done.

  7. On the Select features screen, you have a choice:


    1. You may intend to use the same FQDN and IP address for your SIP Access service, your 비즈니스용 Skype 서버 2015 웹 회의 서비스, and your A/V 에지 서비스. If so, you need to choose the Use a single FQDN and IP address checkbox (and keep this in mind for Step 9 below)

    2. If you're planning to enable federation, choose the Enable federation for this 에지 풀 (Port 5061) check box.

  8. Once you've clicked Next, you'll find yourself on the IP Options screen. Your options are as follows:


    1. Enable IPv4 on the internal interface

    2. Enable IPv6 on the internal interface

    3. Enable IPv4 on the external interface

    4. Enable IPv6 on the external interface

    These are pretty self-explanatory, whether you’re using IPv4 or IPv6 addresses, and you’re applying those addresses on your 에지 서버 internally or externally (you’ll need to keep this in mind for Step 10). You also have the option of configuring your 에지 서버 or your 에지 풀 to use a network address translation (NAT) address for the external IP address. You can do this by choosing The external IP address of this Edge pool is translated by NAT check box . Click Next when ready.

  9. On the External FQDNs screen, your choices depend on the selection you made in Step 7 above.


    1. If you checked the Use a single FQDN and IP Address check box, you need to enter your single external FQDN in the SIP Access box. Then you’ll need to enter different port numbers for each edge service to allow them all to connect independently. We recommend 5061 for the SIP Access Edge service, 444 for the Web Conferencing Edge service, and 443 for the A/V Edge service. Click Next when done.

    2. If you didn’t check the Use a single FQDN and IP Address check box, you’ll now need to enter the three external FQDNs for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service. Click Next when done.

  10. You’re now on the Define the Internal IP address screen. Here you’ll type the IP address of your 에지 서버 in the Internal IPv4 address and Internal IPv6 address text boxes, depending on the choices you made back in Step 8. Click Next when ready.

  11. On the Define the External IP address screen, you have a few options depending on your previous choices:


    1. You may be using a single FQDN for all services. If so, type your external IPv4 or IPv6 address (whichever you’re using) into the SIP Access text box, and then click Next.

    2. You may have chosen to use three separate FQDNs and IP addresses for the services. If that’s the case, enter your external IPv4 or IPv6 addresses for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service, and then click Next.

    note참고:
    If you didn't previously choose to enable and assign IPv6 addressing, you won't see this dialog box. That's normal, just go to the next step.
  12. If you chose to use NAT back in Step 8, you’ll now get a screen with a Public IP address textbox. You’ll need to enter the public IPv4 and/or IPv6 address you’ve set for the A/V Edge service, to be translated by NAT. Then click Next.

  13. Next screen up is Define the next hop. In the Next hop pool box, select the name of your internal pool, which might be a 프런트 엔드 풀 or a Standalone pool. If you have a 디렉터 in your environment, you should choose the 디렉터. Then click Next.

  14. On the Associate Front End pools screen, you’ll need to specify one or more internal pools, including 프런트 엔드 풀 and Standard Edition 서버, to associate with this 에지 서버. Just choose the names of the internal pools you want using this 에지 서버 to communicate with supported external users. Click Next.

    note참고:
    Something to keep in mind here is, if your internal pools or standalone servers are already using a different 비즈니스용 Skype 서버 2015 에지 서버, they can’t have multiple associations. If you choose an internal pool or standalone server that’s in that situation, you’ll see a warning appear telling you about the other 에지 서버, and you can decide whether you want to continue or not. If you go ahead with this new association, the connection to the other 에지 서버 will stop.
  15. Click Finish on the next screen.

  16. Now you'll be able to publish this updated technology, and follow the instructions in Deploy Edge Servers in Skype for Business Server 2015 to deploy to your 에지 서버 from here.

  1. Log onto your 비즈니스용 Skype 서버 2015 Standard Edition 서버, or a 비즈니스용 Skype 서버 2015 프런트 엔드 서버.

  2. Once there, open 비즈니스용 Skype 서버 2015 토폴로지 작성기.

  3. In the console tree, expand the site you're going to deploy the 에지 서버 to.

  4. Right-click 에지 풀, and then click New 에지 풀.

  5. You'll click Next on the Define New 에지 풀 screen.

  6. On the Define the 에지 풀 FQDN screen, type the internal fully qualified domain name (FQDN) that the 에지 풀 is going to use, and select Multiple computer pool, clicking Next when done.

  7. On the Select features screen, you have a choice:


    1. You may intend to use the same FQDN and IP address for your SIP Access service, your 비즈니스용 Skype 서버 2015 Web Conferencing Service, and your A/V Edge service. If so, you need to choose the Use a single FQDN and IP address checkbox (and keep this in mind for Step 9 below)

    2. If you're planning to enable federation, choose the Enable federation for this 에지 풀 (Port 5061) check box.

  8. Once you've clicked Next, you'll find yourself on the IP Options screen. Your options are as follows:


    1. Enable IPv4 on the internal interface

    2. Enable IPv6 on the internal interface

    3. Enable IPv4 on the external interface

    4. Enable IPv6 on the external interface

    These are pretty self-explanatory, whether you’re using IPv4 or IPv6 addresses, and you’re applying those addresses on your 에지 서버 internally or externally (you’ll need to keep this in mind for Step 11). You also have the option of configuring your 에지 서버 or your 에지 풀 to use a network address translation (NAT) address for the external IP address. You can do this by choosing The external IP address of this Edge pool is translated by NAT check box . Click Next when ready.

  9. On the External FQDNs screen, your choices depend on the selection you made in Step 7 above.


    1. If you checked the Use a single FQDN and IP Address check box, you need to enter your single external FQDN in the SIP Access box. Then you’ll need to enter different port numbers for each edge service to allow them all to connect independently. We recommend 5061 for the SIP Access Edge service, 444 for the Web Conferencing Edge service, and 443 for the A/V Edge service. Click Next when done.

    2. If you didn’t check the Use a single FQDN and IP Address check box, you’ll now need to enter the three external FQDNs for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service. Click Next when done.

  10. Now you’ve reached the Define the computers in this pool screen. Click the Add button.

  11. You’re now on the Define the Internal IP address screen. Here you’ll type the IP address of your Edge Server in the Internal IPv4 address and Internal IPv6 address text boxes, depending on the choices you made back in Step 8. Click Next when ready.

  12. On the Define the External IP address screen, you have a few options depending on your previous choices:


    1. You may be using a single FQDN for all services. If so, type your external IPv4 or IPv6 address (whichever you’re using) into the SIP Access text box, and then click Next.

    2. You may have chosen to use three separate FQDNs and IP addresses for the services. If that’s the case, enter your external IPv4 or IPv6 addresses for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service, and then click Next.

    note참고:
    If you didn't previously choose to enable and assign IPv6 addressing, you won't see this dialog box. That's normal, just go to the next step.
  13. Click Finish. The 에지 서버 you just created should now be listed in the Define the computers in this pool dialog box.

  14. While still on the Define the computers in this pool screen, click the Add button again and repeat steps 11 through 13 until you’ve added all the 에지 서버 you intend to have in this pool. When this is complete, click Next.

  15. If you chose to use NAT back in Step 8, you’ll now get a screen with a Public IP address textbox. You’ll need to enter the public IPv4 and/or IPv6 address you’ve set for the A/V Edge service, to be translated by NAT. Then click Next.

  16. Next screen up is Define the next hop. In the Next hop pool box, select the name of your internal pool, which might be a 프런트 엔드 풀 or a Standalone pool. If you have a 디렉터 in your environment, you should choose the 디렉터. Then click Next.

  17. On the Associate Front End pools screen, you’ll need to specify one or more internal pools, including 프런트 엔드 풀 and Standard Edition pools, to associate with this 에지 서버. Just choose the names of the internal pools you want using this 에지 서버 to communicate with supported external users. Click Next.

    note참고:
    Something to keep in mind here is, if your internal pools or standalone servers are already using a different 비즈니스용 Skype 서버 2015 에지 서버, they can’t have multiple associations. If you choose an internal pool or standalone server that’s in that situation, you’ll see a warning appear telling you about the other 에지 서버, and you can decide whether you want to continue or not. If you go ahead with this new association, the connection to the other 에지 서버 will stop.
  18. Click Finish on the next screen.

  19. Now you'll be able to publish this updated technology, and follow the instructions in Deploy Edge Servers in Skype for Business Server 2015 to deploy to your 에지 서버 from here.

  1. Log onto your 비즈니스용 Skype 서버 2015 Standard Edition 서버, or a 비즈니스용 Skype 서버 2015 프런트 엔드 서버.

  2. Once there, open 비즈니스용 Skype 서버 2015 토폴로지 작성기.

  3. In the console tree, expand the site you're going to deploy the 에지 서버 to.

  4. Right-click 에지 풀, and then click New 에지 풀.

  5. You'll click Next on the Define New 에지 풀 screen.

  6. On the Define the 에지 풀 FQDN screen, type the internal fully qualified domain name (FQDN) that the 에지 풀 is going to use, and select Multiple computer pool, clicking Next when done.

  7. On the Select features screen, you have a choice:


    1. You may intend to use the same FQDN and IP address for your SIP Access service, your 비즈니스용 Skype 서버 2015 Web Conferencing Service, and your A/V Edge service. If so, you need to choose the Use a single FQDN and IP address checkbox (and keep this in mind for Step 9 below)

    2. If you're planning to enable federation, choose the Enable federation for this Edge pool (Port 5061) check box.

  8. Once you've clicked Next, you'll find yourself on the IP Options screen. Your options are as follows:


    1. Enable IPv4 on the internal interface

    2. Enable IPv6 on the internal interface

    3. Enable IPv4 on the external interface

    4. Enable IPv6 on the external interface

    These are pretty self-explanatory, whether you’re using IPv4 or IPv6 addresses, and you’re applying those addresses on your Edge Server internally or externally (you’ll need to keep this in mind for Step 11).

    note참고:
    Unlike the other two topology options, when using a hardware load balancer, you MUST NOT select the option The external IP address of the Edge Pool is translated by NAT. This is not supported.
  9. On the External FQDNs screen, your choices depend on the selection you made in Step 7 above.


    1. If you checked the Use a single FQDN and IP Address check box, you need to enter your single external FQDN in the SIP Access box. Then you’ll need to enter different port numbers for each edge service to allow them all to connect independently. We recommend 5061 for the SIP Access Edge service, 444 for the Web Conferencing Edge service, and 443 for the A/V Edge service. Click Next when done.

    2. If you didn’t check the Use a single FQDN and IP Address check box, you’ll now need to enter the three external FQDNs for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service. Click Next when done.

  10. Now you’ve reached the Define the computers in this pool screen. Click the Add button.

  11. You’re now on the Define the Internal IP address screen. Here you’ll type the IP address of your 에지 서버 in the Internal IPv4 address and Internal IPv6 address text boxes, depending on the choices you made back in Step 8. Click Next when ready.

  12. On the Define the External IP address screen, you have a few options depending on your previous choices:


    1. You may be using a single FQDN for all services. If so, type your external IPv4 or IPv6 address (whichever you’re using) into the SIP Access text box, and then click Next.

    2. You may have chosen to use three separate FQDNs and IP addresses for the services. If that’s the case, enter your external IPv4 or IPv6 addresses for the SIP Access Edge service, the Web Conferencing Edge service, and the A/V Edge service, and then click Next.

    note참고:
    If you didn't previously choose to enable and assign IPv6 addressing, you won't see this dialog box. That's normal, just go to the next step.
  13. Click Finish. The 에지 서버 you just created should now be listed in the Define the computers in this pool dialog box.

  14. While still on the Define the computers in this pool screen, click the Add button again and repeat steps 11 through 13 until you’ve added all the 에지 서버 you intend to have in this pool. When this is complete, click Next.

  15. Next screen up is Define the next hop. In the Next hop pool box, select the name of your internal pool, which might be a 프런트 엔드 풀 or a Standalone pool. If you have a 디렉터 in your environment, you should choose the 디렉터. Then click Next.

  16. On the Associate Front End pools screen, you’ll need to specify one or more internal pools, including 프런트 엔드 풀 and Standard Edition pools, to associate with this 에지 서버. Just choose the names of the internal pools you want using this 에지 서버 to communicate with supported external users. Click Next.

    note참고:
    Something to keep in mind here is, if your internal pools or standalone servers are already using a different Skype for Business Server 2015 Edge Server, they can’t have multiple associations. If you choose an internal pool or standalone server that’s in that situation, you’ll see a warning appear telling you about the other Edge Server, and you can decide whether you want to continue or not. If you go ahead with this new association, the connection to the other Edge Server will stop.
  17. Click Finish on the next screen.

  18. Now you'll be able to publish this updated technology, and follow the instructions in Deploy Edge Servers in Skype for Business Server 2015 to deploy to your 에지 서버 from here.

Once you’ve finished the steps above, it’s time to publish this new topology, which will also allow you to export it to your 비즈니스용 Skype 서버 2015 에지 서버 or 에지 풀. Follow these steps:


  1. Start Topology Builder (if it's not started already from the previous procedure).

  2. In Topology Builder, in the console tree, right-click 비즈니스용 Skype 서버 2015 and then click 비즈니스용 Skype 서버 토폴로지 작성기.

  3. On the Welcome page of the wizard, click Next.

  4. On the Create other databases page, click Next.

  5. When the status indicates that the database creation succeeded, do the following:

    • To view the log, click View log.

    • To close the wizard, click Finish.

To deploy successfully, the 비즈니스용 Skype 서버 2015 배포 마법사 needs access to the 중앙 관리 저장소 data. For internal servers in your domain or forest, this typically is straightforward. 에지 서버 are outside of the domain, and so it’s necessary to manually export the topology file to the 에지 서버 location, usually on a physical media. This export is done via PowerShell:


  1. Start the 비즈니스용 Skype 서버 관리 쉘.

  2. In the 비즈니스용 Skype 서버 관리 쉘, run the following:

    Export-CsConfiguration -FileName <ConfigurationFilePath.zip>
    
  3. Copy the exported file to external media (for example, a USB drive or network share that you can reach from the 에지 서버's location).

 
표시: