MSExchange ActiveSync 1010
마지막으로 수정된 항목: 2011-03-19
이 문서에서는 특정 Exchange 이벤트에 대한 설명과 가능한 해결 방법을 제공합니다. 여기서 원하는 내용을 찾을 수 없는 경우 Exchange 2010 도움말을 검색해 보세요.
Details
Product Name |
Exchange |
Product Version |
14.0 |
Event ID |
1010 |
Category |
Configuration |
Symbolic Name |
MaxHbiTooHigh |
Message Text |
Direct Push has detected that the configuration value for the maximum heartbeat interval is set to a value higher than the maximum allowed value of "%1" seconds. Therefore, the default maximum heartbeat interval of "%2" seconds and the default minimum heartbeat interval of "%3" seconds will be used until the next time that the computer is restarted. To avoid seeing this message in the future, use Internet Information Services (IIS) Manager to correct this configuration. Reset the value to the default, or use another acceptable value. |
Explanation
This Warning event indicates that Exchange Direct Push has detected that the configuration value for the maximum heartbeat interval is set to a value higher than the maximum acceptable value. This can only occur if these settings were manually changed. This configuration is not valid. Microsoft Exchange ActiveSync reverted to the default values for minimum heartbeat interval and maximum heartbeat interval until a valid configuration is set. The default minimum heartbeat interval is 60 seconds (1 minute). The default maximum heartbeat interval is 3,540 seconds (59 minutes). Exchange ActiveSync will revert to the default settings until the next time that the server that is running Microsoft Exchange is restarted.
경고
It is recommended that you only use non-default values if that has been recommended by Microsoft Product Support Services.
User Action
To resolve this warning, manually change the settings to the default settings or other acceptable values:
Start Internet Information Services (IIS) Manager.
In the console tree, click Web Sites, and then click Default Web Site.
Right-click Microsoft-Server-ActiveSync, and then click Properties.
On the ASP.NET tab, click Edit Configuration.
On the General tab, under Application settings, do one of the following:
Configure the MinHeartbeatInterval and MaxHeartbeatInterval settings to match the default values.
Configure values that are not default. When you use values that are not default, you must configure the MinHeartbeatInterval to a value lower than the MaxHeartbeatInterval. You must also configure values in the acceptable range. The acceptable range of values for the MinHeartbeatInterval is 1 to 3,540. The acceptable range of values for the MaxHeartbeatInterval is 2 to 3,540.
For More Information
Exchange 도구를 아직 사용하고 있지 않은 경우 환경을 분석하고 문제 해결을 위해 이를 실행하는 것이 좋습니다. 이러한 도구를 사용하여 Microsoft 모범 사례에 따라 구성되었는지 확인할 수 있습니다. 또한 성능 문제를 식별하고 해결할 수 있으며 메일 흐름을 개선할 수 있습니다. 이러한 도구를 실행하려면 Exchange 관리 콘솔의 도구 상자 노드로 이동합니다. 이 도구에 대한 자세한 내용은 도구 상자의 도구 관리를 참고하세요.