Configure media bypass global settings in Skype for Business Server 2015 to use site and region information

 

마지막으로 수정된 항목: 2015-08-17

Configure media bypass to be used for only certain sites and regions in 비즈니스용 Skype 서버 Enterprise Voice.

If you use the steps in this topic to configure global settings for media bypass, the assumption is that you do not have good connectivity between all 비즈니스용 Skype endpoints and any peer for which you configured media bypass on the trunk connection.

note참고:
Network region and network site information is shared between call admission control and media bypass advanced Enterprise Voice features when both are enabled. Therefore, if you have already configured call admission control, you are not required to use the following procedure to edit the site and region information specifically for media bypass. Follow the steps in this procedure if you have not yet configured network regions and sites for call admission control, and you want to change media bypass settings.

For media bypass to work properly there must be consistency between a site as defined in 토폴로지 작성기 and as it is defined when you configure network regions and network sites. For example, if you have a branch site that you defined in 토폴로지 작성기 as having only a PSTN gateway deployed, then that branch site must be configured with an Enterprise Voice policy that enables branch site users to have their PSTN calls routed through the PSTN gateway at the branch site.

  1. 브라우저 창을 연 다음 Admin URL을 입력하여 비즈니스용 Skype 서버 제어판을 엽니다. 비즈니스용 Skype 서버 제어판을 사용하여 시작할 수 있는 다양한 방법에 대한 자세한 내용은 Lync Server 관리 도구 열기를 참조하세요.

  2. In the left navigation bar, click Network Configuration.

  3. Double-click the Global configuration in the table.

  4. On the Edit Global Setting page, select the Enable media bypass check box.

  5. Click Use sites and region configuration.

  6. If necessary, select the Enable bypass for non-mapped sites check box.

    note참고:
    Select this check box only if you have one or more large sites associated with the same region that do not have bandwidth constraints (for example, a large central site), but you also have some branch sites associated with the same region that do have bandwidth constraints. When you enable bypass for non-mapped sites, configuration is streamlined in that you specify only the subnets associated with the branch sites, rather than needing to specify all subnets associated with all sites. We recommend that you do not select this check box if call admission control is enabled.
  7. Click Commit.

Next, add subnets to the network site, as described in Associate a subnet with a network site. After you associate all subnets with network sites, media bypass deployment is complete.

important중요:
If you have not already created network regions and network sites, you must first create those before you can proceed with media bypass deployment. For details, see Deploy network regions, sites and subnets in Skype for Business 2015.
 
표시: